Republic of Karelia city Petrozavodsk «Energoresurs – т » LLC Innovation technologies Heat – accumulating stoves and fireplaces made of soapstone

Healing heat-accumulating electric furnaces Annikki are completely made of soapstone and are highly competitive with wood and sauna stoves Healing heat emission from an electric furnace Annikki

Model range of electric furnaces Annikki made of soap stone with electric power from 2 up to 12KW Electric furnaces Annikki are different from all the existing electric furnaces in that the incandesced up to t=700 degrees C electric heating elements are places in a soapstone and the air from the sauna does not go through the heating elements as well as the water does not get in them. Model TEK – 1H Electric potential 220 V Electric power 2KW W*D*H: 300*100*700 mm Model TEK -1 Electric potential 220 V Electric power 2-4KW W*D*H: 410*300*800 mm Model TEK-2 Electric potential 220 V Electric power 4-7KW W*D*H: 410*320*860 mm Model TEK-3 Electric potential 380 V Electric power 6-12KW W*D*H: 460*380*900 mm

Attached electric furnaces Annikki for apartments, detached houses and offices Attached electric furnaces Annikki models TEK – 1H, electric power 2 KW, W * D * H: 360 *120*620 mm, weight: 30kg The volume of the sauna for one electric furnace Annikki model TEK – 1H is up to 1,5 cu.m. or 0,8 square meters. You can install a few electric furnaces if you need

Covering (barrier) made of soapstone for wood-burning metallic sauna stoves Covering (barrier) of soapstone minimizes hard rays from the metallic body of the stove Russian sauna President Open top with portal Super-soapstone

Heat-accumulating stove elements of soapstone for stoves Sampo X, Sampo T and Sampo M Big stove element for stoves Sampo X30, W*D*H: 660*450*1 200 mm, weight: 580 kg Middle stove element for stoves Sampo X25, W*D*H: 570*450*1 090 mm, weight: 476 kg Little stove element for stoves Sampo X15, W*D*H: 570*450*790 mm, weight: 342 kg Put together scheme of stove element of soapstone Heat capacity with oven (290* 320) of coal clay covered with talcum peach W*D*H: 625*565*700 mm, weight: 370 kg Heat capacity bread (410* 230) of coal clay covered with talcum peach W*D*H: 565*625*600 mm, weight: 350 kg Heat capacity with oven (290* 320) of coal clay covered with talcum peach W*D*H: 625*565*650 mm, weight: 340 kg

Stove-fireplace with heat capacity Sampo (STE Stove), using firewood and night electroenergy Electric power up to 12 KW Heated area up to 100 square meters Heat preserve up to 18 hours Electrical distribution box Fan Warm air outlet Stove element of soapstone Stove Sampo Xev 30/12 (STE Stove) based on stove element of talk-magnesite Cast iron heating-incept Konig Feuer with convection cover Electrical distribution box Fan Warm air outlet Stove Sampo MFEv6 (STE Stove) based on cast iron heating Konig Feuer Places where electro heaters are installed Places where electro heaters are installed

Organization and installation of a heat accumulator СТЭ In an apartment in a 1-2 storey house and In a multistorey house

Electro supply of a low storey house with minimal energy requirements under-floor heating Heat accumulator STE wall heat accumulator to accumulate heat of outgoing smoke gas warm air heat-accumulating stove fireplace Sampo XEv with electric heating element (STE stove) remotes of controlling system double rate meter contractor calculator timer power regulator cold air wind turbine Electrical grid night or daytime rate heat preserve heat loss Micro HPP modern application of wind turbine and micro HPP with heat accumulators STE (“Wall”) and stoves Sampo Xev (STE Stove) increases working effectiveness of autonomus electric energy sources by 20-40% Dock Heat accumulator STE wall power up to 100 KW

«Energeresourse – t» city Petrozavodsk 8(814) (814) (911) Yielded production has all the necessary certificates «Energeresourse – t» LLC has 15 patents on yielded production Our partners: RAN United Institute of High Temperatures Our partner: Republic of Karela Petrozavodsk State University