Ch 2.3: Modeling with First Order Equations Mathematical models characterize physical systems, often using differential equations. Model Construction: Translating physical situation into mathematical terms. Clearly state physical principles believed to govern process. Differential equation is a mathematical model of process, typically an approximation. Analysis of Model: Solving equations or obtaining qualitative understanding of solution. May simplify model, as long as physical essentials are preserved. Comparison with Experiment or Observation: Verifies solution or suggests refinement of model.

Example 1: Mice and Owls Suppose a mouse population reproduces at a rate proportional to current population, with a rate constant of 0.5 mice/month (assuming no owls present). Further, assume that when an owl population is present, they eat 15 mice per day on average. The differential equation describing mouse population in the presence of owls, assuming 30 days in a month, is Using methods of calculus, we solved this equation in Chapter 1.2, obtaining

Example 2: Salt Solution (1 of 7) At time t = 0, a tank contains Q 0 lb of salt dissolved in 100 gal of water. Assume that water containing ¼ lb of salt/gal is entering tank at rate of r gal/min, and leaves at same rate. (a) Set up IVP that describes this salt solution flow process. (b) Find amount of salt Q(t) in tank at any given time t. (c) Find limiting amount Q L of salt Q(t) in tank after a very long time. (d) If r = 3 & Q 0 = 2Q L, find time T after which salt is within 2% of Q L. (e) Find flow rate r required if T is not to exceed 45 min.

Example 2: (a) Initial Value Problem (2 of 7) At time t = 0, a tank contains Q 0 lb of salt dissolved in 100 gal of water. Assume water containing ¼ lb of salt/gal enters tank at rate of r gal/min, and leaves at same rate. Assume salt is neither created or destroyed in tank, and distribution of salt in tank is uniform (stirred). Then Rate in: (1/4 lb salt/gal)(r gal/min) = (r/4) lb/min Rate out: If there is Q(t) lbs salt in tank at time t, then concentration of salt is Q(t) lb/100 gal, and it flows out at rate of [Q(t)r/100] lb/min. Thus our IVP is

Example 2: (b) Find Solution Q(t) (3 of 7) To find amount of salt Q(t) in tank at any given time t, we need to solve the initial value problem To solve, we use the method of integrating factors: or

Example 2: (c) Find Limiting Amount Q L (4 of 7) Next, we find the limiting amount Q L of salt Q(t) in tank after a very long time: This result makes sense, since over time the incoming salt solution will replace original salt solution in tank. Since incoming solution contains 0.25 lb salt / gal, and tank is 100 gal, eventually tank will contain 25 lb salt. The graph shows integral curves for r = 3 and different values of Q 0.

Example 2: (d) Find Time T (5 of 7) Suppose r = 3 and Q 0 = 2Q L. To find time T after which Q(t) is within 2% of Q L, first note Q 0 = 2Q L = 50 lb, hence Next, 2% of 25 lb is 0.5 lb, and thus we solve

Example 2: (e) Find Flow Rate (6 of 7) To find flow rate r required if T is not to exceed 45 minutes, recall from part (d) that Q 0 = 2Q L = 50 lb, with and solution curves decrease from 50 to Thus we solve

Example 2: Discussion (7 of 7) Since situation is hypothetical, the model is valid. As long as flow rates are accurate, and concentration of salt in tank is uniform, then differential equation is accurate description of flow process. Models of this kind are often used for pollution in lake, drug concentration in organ, etc. Flow rates may be harder to determine, or may be variable, and concentration may not be uniform. Also, rates of inflow and outflow may not be same, so variation in amount of liquid must be taken into account.

Example 3: Pond Pollution (1 of 7) Consider a pond that initially contains 10 million gallons of fresh water. Water containing toxic waste flows into the pond at the rate of 5 million gal/year, and exits at same rate. The concentration c(t) of toxic waste in the incoming water varies periodically with time: c(t) = 2 + sin 2t g/gal (a) Construct a mathematical model of this flow process and determine amount Q(t) of toxic waste in pond at time t. (b) Plot solution and describe in words the effect of the variation in the incoming concentration.

Example 3: (a) Initial Value Problem (2 of 7) Pond initially contains 10 million gallons of fresh water. Water containing toxic waste flows into pond at rate of 5 million gal/year, and exits pond at same rate. Concentration is c(t) = 2 + sin 2t g/gal of toxic waste in incoming water. Assume toxic waste is neither created or destroyed in pond, and distribution of toxic waste in pond is uniform (stirred). Then Rate in: (2 + sin 2t g/gal)(5 x 10 6 gal/year) Rate out: If there is Q(t) g of toxic waste in pond at time t, then concentration of salt is Q(t) lb/10 7 gal, and it flows out at rate of [Q(t) g/10 7 gal][5 x 10 6 gal/year]

Example 3: (a) Initial Value Problem, Scaling (3 of 7) Recall from previous slide that Rate in: (2 + sin 2t g/gal)(5 x 10 6 gal/year) Rate out: [Q(t) g/10 7 gal][5 x 10 6 gal/year] = Q(t)/2 g/yr. Then initial value problem is Change of variable (scaling): Let q(t) = Q(t)/10 6. Then

Example 3: (a) Solve Initial Value Problem (4 of 7) To solve the initial value problem we use the method of integrating factors: Using integration by parts (see next slide for details) and the initial condition, we obtain after simplifying,

Example 3: (a) Integration by Parts (5 of 7)

Example 3: (b) Analysis of solution (6 of 7) Thus our initial value problem and solution is A graph of solution along with direction field for differential equation is given below. Note that exponential term is important for small t, but decays away for large t. Also, y = 20 would be equilibrium solution if not for sin(2t) term.

Example 3: (b) Analysis of Assumptions (7 of 7) Amount of water in pond controlled entirely by rates of flow, and none is lost by evaporation or seepage into ground, or gained by rainfall, etc. Amount of pollution in pond controlled entirely by rates of flow, and none is lost by evaporation, seepage into ground, diluted by rainfall, absorbed by fish, plants or other organisms, etc. Distribution of pollution throughout pond is uniform.