Chapter 15 – Work, Power & Simple Machines

Slides:



Advertisements
Similar presentations
Simple Machines.
Advertisements

What do simple machines do for us anyway?
Work, Power, and Machines
WARM UP Have book on desk & ready for book check
Work and Machines Chapter 3.
Chapter 14 Work & Simple Machines 4/12/2017 2:57 PM
Simple Machines.
Simple Machines Chapter 15 Lesson 2 Pages F16 – F25.
Chapter 5 Work and Machines
Work, Power, & Machines What is work ? The product of the force applied to an object and the distance through which that force is applied.  Work  Work.
Unit 5 - Machines MACHINES – UNIT 5.
Work and Machines.
Work and Simple Machines
Machines. Work and Power Power is the rate at which work is done Power = Work time Remember that W = Fd So, Power = Fd t Power is measured in Watts –1.
Work & Machines. Topics Work and Power –Definition, Calculation, and Measurement Using Machines –Nature of Machines –Mechanical Advantage –Efficiency.
How Tools Work. The Six Simple Machines  Lever  Inclined Plane  Wedge  Screw  Pulley  Wheel and Axle.
Work and Machines Chapter 5 Sec 2. What is a Machine?  Any device that makes work easier.
Work, Power, and Simple Machines
Work, Power, Simple machines
 Write a list of 10 examples your idea of work.  What do all of these have in common?  What do they require?  How do you assess if work is done? 
Work and Machines Chapter 14
Work, Power and Simple Machines
Work and Machines Chapter 5 What is Work The product of the force applied to an object and the distance through which that force is applied.
Chapter 5 Work and Machines.
Chapter 8: Work, Power, Simple machines
Copyright © by Holt, Rinehart and Winston. All rights reserved. ResourcesChapter menu Section 1 Work and Power What Is Work? Work is the transfer of energy.
Chapter 8 Work and Machines.
Chapter 12 Flash Cards 20 index cards. Work When force is exerted on an object causing it to move in the same direction Work = F x D Joule (J) = Nm.
Simple Machines Work and Simple Machines What is a Simple Machine?  A simple machine has few or no moving parts.  Simple machines make work easier.
Simple Machines There are 6 types of simple machines: the inclined plane, the wedge, the screw, the lever, the pulley, and the wheel and axle.
Motion, Forces, and Energy Chapter 1: Motion. Recognizing Motion: Motion: –When an object’s distance changes relative to a frame of reference Frame of.
WORK POWER SIMPLE MACHINES. I. WORK 1. What is work? A force acting through a distance No work is done on the object unless the object moves and the.
Simple Machines Work and Simple Machines What is a Simple Machine?  A simple machine has few or no moving parts.  Simple machines make work easier.
Work  The product of the force and distance when a force is used to move an object.
Machine- a device that makes work easier by changing the direction or size of the force.
Simple Machines Spring 2014.
Chapter 8 Work and Machines. Work: ___________________________________________________________ ________________________________________________________________.
Work, Power, & Machines Chapter 14 What is work ? The product of the force applied to an object and the distance through which that force is applied.
Chapter 12 SG Review 8 th - Advanced. 1. Define Work – When you exert force on an object and it causes an object to move some distance. 2. When is work.
Work and Machines. What is Work? Work is force times distance. To be exact, work is force times the distance moved in the direction of the force. The.
Simple Machines Work and Simple Machines What is a Simple Machine?  A simple machine has few or no moving parts.  Simple machines make work easier.
Work, Machines, and Energy. Work and Power  Work is done if (1) an object moves, and (2) if a force acts in the same direction that the object moves.
Physical Science Chapter 5 Work and Machines 1 Note to self: Find videos.
CHAPTER 14 Work, Power and Machines Work and Power Work requires motion. Work is the product of force and distance. Figure 1 work is only being.
Work, Power, and Machines Glencoe Chapter 5. A. Work is the transfer of energy that occurs when a force makes an object move. 1. For work to occur, an.
Work, Power, & Machines What is work ?  The scientific definition of work is: using a force to move an object a distance (when both the force and the.
Work, Power, and Simple Machines
CH 14.1 Work and Power. TrueFalseStatementTrueFalse Work is the product of force, distance and time Power is the amount of work done in a certain time.
Work, Power, & Machines What is work ?  The  The product of the force applied to an object and the distance through which that force is applied.
Mechanical Advantage & Simple Machines
Warm Up: 1/14/13  Give an example of a machine you use on a daily basis. Then say how you thinks it helps to make work easier.
Work, Power & Simple Machines (Making work easier…phew!)
Bell Work: Work Intro. Work and Power Work  Work is a force causing something to move a distance.  Work = force x distance  W=f x d  Units for work:
Test 6: Chapter 5 Work & Machines Honors Physical Science.
Chapter 8  Work, Power, and Machines. Work  Work- A force acting through a distance.  The distance that the object moves must be in the same direction.
Physical Chapter Seven Simple Machines Levers Pulleys Inclined Planes Screws Wheel & Axle Wedge Compound Machines.
Simple Machines W O R K M e c h a n i c a l A d v a n t a g e Force Effort E f f i c i e n c y 1.
Work What is work? –Work is what happens when a force moves an object over a distance in the direction of the force. –Examples: Push a shopping cart Turn.
Chapter 8 Guided Reading. _____________ occurs when a force causes an object to move in the direction of the force. Work is done on an object only when.
Work, Power, and Machines Physical Science. What is Work? Transfer of Energy Occurs when a force makes an object move a distance.
Chapter 11 work and machines. Anytime that you exert a force and cause an object to move in the direction of the applied force you do _________. work.
Chapter 7 Review.
Chapter 15 Machines What is a simple machine? People use machines to make work easier They allow a person to -change the size of the force -change.
Chapter 8 Sect. 2 & 3 Simple and Compound Machines Mechanical Advantage and Mechanical Efficiency 1.
Work and Simple Machines.
Chapter 4: Work and Machines
Chapter 8 Work and Machines.
Chapter 8 Work and Machines
Work, Power, and Simple Machines
Chapter 3 Work & Machines.
Presentation transcript:

Chapter 15 – Work, Power & Simple Machines Essential Questions: I. What is Work? (In Physics Terms!) II. What is Power? (In Physics Terms!) III. How do machines make work easier and how efficient are they? IV. What are the 5 types of simple machines? V. What are compound machines?

15-1 What is Work? Work Def. – Work is done when a force acts on an object along the parallel direction the object moves In order for work to be done, a force must be exerted over a distance. Ex – you can push on a wall for hours, you’ll be real tired, but you haven’t done any work – in the scientific sense, anyway…

15-1 Work Work The amount of work done in moving an object is equal to the force applied to the object along the direction the object moves times the distance through which the object moves Units Force is measured in Newtons, Distance is measured in meters. So, the unit is Newton X meters. A Newton•meter is known as a Joule (J)

15-1 Work W = F * d W = F * d F = 700 N W = (700 N) (50 m) d = 50 m A 700 N person climbs a 50 m cliff. How much work did she perform? GIVEN: W = F * d F = 700 N d = 50 m WORK: W = F * d W = (700 N) (50 m) W = 35,000 J

15-1 Work W = F * d W = F * d F = 200 N W = (200 N) (0.5 m) d = 0.5 m An object weighing 200 N is lifted 0.5 m. How much work was required? GIVEN: W = F * d F = 200 N d = 0.5 m WORK: W = F * d W = (200 N) (0.5 m) W = 100 J

15-1 Work W = F * d W = 50 J F = 0.05 N GIVEN: A dog does 50 N-m (Joules) of work dragging a 0.05 N bone. How far did the bone move? GIVEN: W = F * d W = 50 J F = 0.05 N WORK: W = F * d d = W F d = (50 J) (0.05 N) d = 1,000 m

15-1 Work W = F * d W = 25.0 J d = 2.0 m GIVEN: WORK: W = F * d F = W Mrs. O’Gorman’s superhuman strength allows her to lift a pickup truck 2.0 m above the ground. How much force was required if 25.0 Joules (J) of work was done? GIVEN: W = F * d W = 25.0 J d = 2.0 m WORK: W = F * d F = W d F = 25.0 J 2.0 m F = 12.5 N

15-2 Power Power Def: The rate at which work is done, or the amount of work per unit time. Power tells you how fast work is being done – so it is a rate – similar to the way speed, velocity and acceleration are rates. Power is work per unit time. Any measurement per unit time is a rate!! Formula:

15-2 Power Power rate at which work is done measured in watts (W) P: power (W) W: work (J) t: time (s)

15-2 Power Formula: Since work’s formula is force X Distance, the formula for Power may ALSO be written as:

15-2 Power Units Work is measured in Joules (J), So, the unit for Power is a Joule per second (J/s). The short way to write a J/s is a Watt (W).

15-2 Power When do we use Watts in our Daily Lives? They are used to express electrical power. Electric appliances and lightbulbs are rated in Watts. Ex: A 100 Watt light bulb does twice the work in one second as a 50 Watt lightbulb.

15-2 Power A small motor does 4000 J of work in 20 sec. What the power of the motor in Watts? GIVEN: W = 4000 J T = 20 sec P = ? WORK: P = W ÷ t P = 4000 J ÷ 20 s P = 200 J ÷ s So P = 200 W

15-2 Power An engine moves a remote control car by performing 120,000 J of work. The power rating of the car is 2400 W. How long does it take to move the car? GIVEN: P = 2400 W W = 120,000 J T = ? WORK: t = W ÷ P t = 120,000 J ÷ 2400 W t = 50 sec

15-2 Power A figure skater lift his partner who weighs 450 N, 1.5 m in 3.0 sec. How much power is required? P F x d t GIVEN: P = ? F = 450 N d = 1.5 m t = 3.0 sec WORK: P = F x d t P = 450 N x 1.5 m 3.0 sec P = 625 J (N•m) 3.0 sec P = 225 W

15-2 Power P W t F = 300 N P = W ÷ t d = 2.0 m W = F x d P = 300 W A sumo wrestler lifts his competitor, who weighs 300 N, 2.0 m using 300 Watts of power. How long did it take him to accomplish this show of strength? P W t GIVEN: F = 300 N d = 2.0 m P = 300 W t = ? WORK: P = W ÷ t W = F x d W = (300 N)(2.0 m) = 600 J t = 600 J ÷ 300 W t = 2.0 s

15-3 Machines Machine – def. – Any device that changes the size of a force, or its direction, is called a machine. Machines can be anything from a pair of tweezers to a bus.

15-3 Machines There are always 2 types of work involved when using a machine Work Input - The work that goes into it. Work Output - The work that comes out of it. The work output can NEVER be greater than the work input!!!

15-3 Machines So, if machines do not increase the work we put into them, how do they help us? Machines make work easier because they change either the size or the direction of the force put into the machine.

15-3 Machines Let’s analyze this… Machines can not increase the amount of work, so work either stays the same or decreases. The formula for work is: Work = force x distance

15-3 Machines Again, the formula for work is: Work = force x distance So, mathematically speaking, to end up with the same or less work: If the machine increases the force then the distance must decrease. If the machine increases the distance, then the force must decrease.

15-3 Machines Why is it that machines can’t have more work output than input? Where does all the work disappear to? A machine loses some of the input work to the force of friction that is created when the machine is used. Part of the input work is used to overcome the force of friction. There is no machine that people have made that is 100% efficient

15-3 Machines If machines make our work easier, how much easier do they make it? The ratio of how much work output there is to the amount of work input is called a machine’s efficiency. Efficiency is usually expressed as a percentage (%).

15-3 Machines Efficiency measure of how completely work input is converted to work output It is always less than 100% due to the opposing force of friction.

15-3 Machines Fi = 500 N Win = (500N)(4.0m) = 2000 J di = 4.0 m A worker exerts a force of 500 N to push a 1500 N sofa 4.0 m along a ramp that is 1.0 m high. What is the ramp’s efficiency? GIVEN: Fi = 500 N di = 4.0 m Fo = 1500 N do = 1.0 m WORK: Win = (500N)(4.0m) = 2000 J Wout = (1500N)(1.0m) = 1500 J E = 1500 J × 100 2000 J E = 75% 4.0m 500N 1.0m 1500N

15-3 Machines Mechanical Advantage is another way of expressing how efficient a machine is. Mechanical advantage is the ratio of resistance force to the effort force.

15-3 Machines Fe = 500 N MA = F resistance Fr = 1500 N F effort A worker exerts a force of 500 N to push a 1500 N sofa 4.0 m along a ramp that is 1.0 m high. What is the mechanical advantage of the ramp? GIVEN: Fe = 500 N Fr = 1500 N WORK: MA = F resistance F effort MA = 1500N 500 N MA = 3 4.0m 500N 1.0m 1500N

15-4 Simple & Compound Machines Simple Machines There are six types of simple machines. They are the: 1 - Inclined plane 2 - Wedge 3 - Screw 4 - Lever 5 - Pulley 6 - Wheel and axle

15-4 Simple & Compound Machines 1 - Inclined Plane Def - A slanted surface used to raise an object. The force needed to lift the object decreases because the distance through which the object moves increases.

15-4 Simple & Compound Machines 2 - Wedge - Inclined Plane Type #1 Def – an inclined plane that moves in order to push things apart. Tines of a fork, axe, knife.

15-4 Simple & Compound Machines 3 - Screw - Inclined Plane Type #2 - Def - An inclined plane wrapped around a central bar or cylinder, to form a spiral. Ex – screw –duh!!!

15-4 Simple & Compound Machines 4 - Lever Def - A rigid bar that is free to pivot, or move around a fixed point called a fulcrum. Ex – see saw There are three main types (classes) of levers.

15-4 Simple & Compound Machines 3 classes of levers: First-class levers have the fulcrum placed between the load and the effort, as in the seesaw, crowbar, and balance scale. Ex - a see-saw or scissors

15-4 Simple & Compound Machines 3 classes of levers: Second-class levers have the load between the effort and the fulcrum. Ex - a wheel barrow

15-4 Simple & Compound Machines 3 classes of levers: Third-class levers have the effort placed between the load and the fulcrum. The effort always travels a shorter distance and must be greater than the load. Ex - a hammer or tweezer

15-4 Simple & Compound Machines 5 - Pulley Def - A rope, chain or belt wrapped around a grooved wheel. It can change the direction of force or the amount of force needed to move an object.

15-4 Simple & Compound Machines To calculate how much mechanical advantage a pulley system creates… Count the number of ropes that are attached to the MOVEABLE pulley – that # is your mechanical advantage!!!

15-4 Simple & Compound Machines 6 - Wheel & Axle Def - Made of 2 circular objects of different sizes attached together to rotate around the same axis.

15-4 Simple & Compound Machines Def - A combination of 2 or more simple machines