Advantages No outside lab fee Minimal chair time Quick turn around time Esthetic and functional control Patient acceptance Delegable to auxiliary staff

Techniques Direct scan of stock or custom abutment Abutment level impression (Snappy) Bench-top image of fixture-level impression Scanbody image with Connect (Live or model) Scanbody image with InLab Scanbody/ScanPost image with Chairside 4.2!

Chairside Choices Hybrid AbutmentHybrid Abutment Crown

Chairside Material Choices IPS e.max MesoinCoris ZI Meso

Chairside Abutment One-time use TiBase Kit specific to your implant (includes Bluecam Scanbody and screw) Scanpost (optional) Gray Scanbody if using Omnicam e.max meso block OR inCoris TZ meso block OR a lab to process your abutment file CAD block of your choice for crown

Scanbody Types

Intraoral Scans Gingiva Mask Restoration arch Opposing Arch Buccal Bite

Omnicam Scanpost

Model Phase Buccal Bite Registration as usual Set Model Axis (new in 4.2)

Scale Tool

Sprue Removal

Fit Check

Ceramic Processing Polish then Crystallize Stain/Glaze Combination Firing Crystallize then 2 nd Fire Characterization

New Firing Pin

Note the Firing Differences

Completed Ceramic Structures

Bonding e.max to TiBase

Delivery No different than what you do now Try in abutment with PA for verification Torque to implant brand requirement Block out screw access Try in crown, adjust as needed Cement crown with SpeedCEM or similar

Most Common Errors Incorrect implant designation Incorrect scanbody type selection Incomplete seating of scanbody on TiBase Tissue margin of abutment below level of TiBase Incorrect model axis Incorrect parameters

PARAMETERS

Anatomic Abutment Crown

Abutment

Abutment Veneering Crown

Implant #8 with Custom Healing Abutment

All Scans Taken Intraorally

e.max HT A2 on F0 inCoris Meso

#30 & #31 NB Active 5.0 w/ Contour Healers

Healing Abutments Removed

Abutments

e.max LT C2

Questions?