Analog Layout with tsmc035 It is better you understand ~wllin/cell_design/celltut.pdf to have the basic layout skill up to chapter 4. Tsmc035 files for layout are ~wllin/tsmc035/Virtuoso/{display.drf,035ms.tf} Place the two file where you run icfb. You need to run Calibre DRC and LVS to make sure layout correct. Rule files are in ~wllin/tsmc035/Calibre_DRC/CM35P5_4M.23b.pre ~wllin/tsmc035/Calibre_LVS/cali035pMM5V_2P4M.lvs  updated on 5/18/2006 to solve pin/port not found error. You need to stream out layout before run “calibre –gui”  To stream out: icfb window  file  export  stream

Virtuoso tech file & Calibre In icfb window,  tools  technology file manager  new  035ms.tf and tech lib name Source /usr/mentor/cic_setup/calibre.csh calibre –gui

Technology file manager

New technology library

Layout

常用 bindkey f --- fit edit ^z --- zoom in Z --- zoom out c --- copy m --- move s --- stretch k --- create ruler K --- clear all ruler F2 --- save F3 --- rotate, mirror ( 需配合 copy, move 使用 ) 拖曳滑鼠右鍵 --- zoom area 單點滑鼠右鍵 重複前一次指令 2.rotate ( 需配合 copy, move 使用 )

Layout

Layout - contact

Layout - label

Calibre - DRC

DRC

Calibre - LVS

LVS

PEX Analog block RC extraction source /usr/mentor/cic_setup/calibre.csh load("/usr/mentor/Calibre_ss/cur/shared/pkgs/icv/tools/quer yskl/calibre.skl") in icfb window From a layout window,  Calibre  run pex  rule can be find in ~wllin/tsmc035/RC_Ex

PEX