The Telephone Instrument Mark P. Melegrito, PECE

History Alexander Graham Bell & Thomas A. Watson The two met in 1872 and invented the telephone in March 1876. Patent number 174, 465 In 1877, there were only six telephones in the world. By 1881, 3,000 telephones were producing revenues and by 1883 there were over 133, 000 units in the U.S. alone. Left the telephone business in 1881 as the telephone company became American Telephone and Telegraph Company (AT & T).

Definition Telephone – comes from the Greek word tele, meaning “from afar,” and phone meaning “sound”, “voice” or “voiced sound”. An apparatus for reproducing sound, especially that of the human voice (Speech), at a great distance, by means of electricity; consisting of transmitting and receiving instruments connected by a line or wire which conveys the electric current. The basic telephone set is a simple analog transceiver designed with the primary purpose of converting speech or acoustical signals into electrical signals.

The Subscriber Loop Ordinary telephone systems are often referred to as POTS (plain old telephone service) Normally, each subscriber is connected to the central office by a single twisted pair of wires called the subscriber loop or simply local loop. Subscriber loop provide means to connect a telephone set at a subscriber’s location to the closest telephone office, which is called an end office, local exchange office or central office.

Types Butterstamp telephone – the first telephone set that combined a transmitter and receiver into a single handheld unit (1878). a) 500 – type telephone set

Types b) 2500 – type telephone set

Basic Functions of the Telephone Set Notify the subscriber when there is an incoming call with an audible signal, such as a bell or with a visible signal such as a flashing light.- Interrupt. Provide a signal to the telephone network verifying when the incoming call has been acknowledged and answered. – the receiver is lifted OFF- HOOK. Convert speech (acoustical) energy to electrical energy in the transmitter and vice versa in the receiver.

Basic Functions of the Telephone Set 4. Incorporate some method of inputting and sending destination telephone numbers (either mechanically or electrically) from the telephone set to the central office switch over the local loop. – rotary dialers(pulses) or touch tone pads(frequency tones) 5. Regulate the amplitude of the speech signal the calling person outputs onto the telephone line. This prevents speakers from producing signal high enough in amplitude to interfere with other people’s conversations taking place on nearby cable pairs (CROSSTALK). 6. Incorporate some means of notifying the telephone office when a subscriber wishes to place an outgoing call. – dial tone

Basic Functions of the Telephone Set 7. Ensure that a small amount of the transmit signal is fed back to the speaker, enabling talkers to hear themselves speaking. This feedback is called sidetone or talkback. Sidetone helps prevent the speaker from talking too loudly. 8. Provide an open circuit (idle condition) to the local loop when the telephone is not in use (ON HOOK) and a closed circuit (busy condition) to the local loop when the telephone is in use (OFF HOOK). 9.Provide a means of transmitting and receiving call progress signals between the central office switch and the subscriber, such as on and off hook, busy, ringing, dial pulses, touch tone signals and dial tone.

Telephone Set, Local Loop and Central Office Switching Machines

Telephone Set, Local Loop and Central Office Switching Machines

Telephone Set, Local Loop and Central Office Switching Machines

Block Diagram of a Telephone Set

Block Diagram of a Telephone Set Ringer Circuit – The purpose of the ringer is to alert the destination party of incoming calls. On/ Off Hook Circuit – also called switch hook is nothing more than a single- throw, double- pole (STDP) switch placed across the tip and ring. Equalizer Circuit – are combinations of passive components that are used to regulate the amplitude and frequency response of the voice signals. Speaker – is the receiver of the circuit. Converts electrical signal from the loop to acoustical signals (sound waves). It is enclosed in the handset of the telephone set.

Block Diagram of a Telephone Set Hybrid Network – sometimes called a hybrid coil or duplex coil. It is a special balanced transformer used to convert a two – wire circuit into a four- wire and vice versa. Another function is to allow a small portion of the transmit signal to be returned to the receiver in the form of a sidetone. Dialing Circuit – enables the subscriber to output signals representing digits, and this enables the caller to enter the destination telephone number.

Basic Telephone Call Procedures

Basic Telephone Call Procedures Calling station goes off hook. After detecting a dc current flow on the loop, the switching machine returns an audible dial tone to the calling station, acknowledging that the caller has access to the switching equipment. The caller dials the destination telephone number using one of two methods: mechanical dial pulsing or, more likely electronic dual – tone multifrequency (Touch- tone) signals. When the switching machine detects the first dialed number, it removes the dial tone from the loop.

Basic Telephone Call Procedures 5. The switch interprets the telephone number and then locates the local loop for the destination telephone number. 6. Before ringing the destination telephone, the switching machine tests the destination loop for dc current to see if its idle (on hook) or in use (off hook). At the same time, the switching machines locates a signal path through the switch between the two local loops. 7a. If the destination telephone is on hook, the switching machine sends a station busy signal back to the calling station.

Basic Telephone Call Procedures 7b. If the destination telephone is on hook, the switching machine sends a ringing signal to the destination telephone on the local loop and at the same time sends a ring- back signal to the calling station to give the caller some assurance that something is happening. 8. When the destination answers the telephone, it completes the loop, causing dc current to flow. 9. The switch recognizes the dc current as the station answering the telephone. At this time, the switch removes the ringing and ring- back signals and completes the path through the switch, allowing the calling and the called parties to begin in their conversation.

To be continued next meeting… Assignment: CALL PROGRESS TONES AND SIGNALS