TRACK 2™ Version 5 The ultimate process management software

Process Monitoring is only the first step in improving process efficiency.

Extensive Analytical Tools TRACK 2  Process Management Software* is all other steps... Data Input * Built with 12 years of user feedback. Operational Control Limit Checks

Easily configure TRACK 2 to model your specific process: No built in constraints

Easily configure TRACK 2 to model your specific process: No built in constraints Point/click and fill in blanks to describe inputs once.

Easily configure TRACK 2 to model your specific process: No built in constraints Point/click and fill in blanks to describe inputs once. Carry forward measurements from previous readings (meter readings, inventory, etc.)

Easily configure TRACK 2 to model your specific process: No built in constraints Point/click and fill in blanks to describe inputs once. Carry forward measurements from previous readings (meter readings, inventory, etc.) Add calculations by clicking on entries and operators

Easily configure TRACK 2 to model your specific process: No built in constraints Point/click and fill in blanks to describe inputs once. Carry forward measurements from previous readings (meter readings, inventory, etc.) Add calculations by clicking on entries and operators Impose operational control limits on any input or calculation, and provide instructions on what to do if the limit is exceeded.

Easily configure TRACK 2 to model your specific process: No built in constraints Point/click and fill in blanks to describe inputs once. Carry forward measurements from previous readings (meter readings, inventory, etc.) Add calculations by clicking on entries and operators Impose operational control limits on any input or calculation, and provide instructions on what to do if the limit is exceeded. Save common configurations to a clone library where they can be reused at will.

Detect trends that can lead to problems later, Powerful data analysis allows you to:

Detect trends that can lead to problems later, Powerful data analysis allows you to: Improve operational efficiency,

Detect trends that can lead to problems later, Improve operational efficiency, Powerful data analysis allows you to: Reduce downtime from equipment failure,

Detect trends that can lead to problems later, Improve operational efficiency, Reduce downtime from equipment failure, Powerful data analysis allows you to: Quickly troubleshoot problems when they do occur,

Detect trends that can lead to problems later, Improve operational efficiency, Reduce downtime from equipment failure, Quickly troubleshoot problems when they do occur, Powerful data analysis allows you to: Generate a wide range of management reports.

TRACK 2 is packed with tools that let you convert unrelated data into valuable information using... Data Table Graphs Reports SPC Charts

Data Table Data (measurements) can be added, edited or deleted directly on the table. Calculated columns (red headers) are automatically updated. Table of Data

Out of limit conditions are immediately noted: Red – above limits Blue – below limits Spoken alert Immediate access to corrective actions Table of Data Data Table

Data (measurements) can be added, edited or deleted directly on the table. Calculated results (red) are automatically updated. Table of Data The tool bar allows you to add/edit the measurement(s), delete a record, and force recalculation of all defined calculations.

Data Table Data (measurements) can be added, edited or deleted directly on the table. Calculated results (red) are automatically updated. The tool bar allows you to add/edit the measurement(s) in form view, delete a record, and draw a quick graph for the highlighted measurement. A drop down list allows you to create a Status Report, Field Service Report, or customized unit summary (service) report for the highlighted date. Table of Data

Graphs Compare up to four measurements on one screen. Tables of numbers are easy to understand when graphed

Graphs Compare up to four measurements

Compare up to four measurements on one screen. Graphs Tables of numbers are easy to understand when graphed Impose statistically derived trend lines.

Graphs Trend Lines

Compare up to four measurements on one screen. Impose statistically derived trend lines. Graphs Tables of numbers are easy to understand when graphed Display line, bar, area or point graphs.

Graphs - Regular Graph Types

Graphs – 3D Graph Types

Compare up to four measurements on one screen. Impose statistically derived trend lines. Display line, bar, area or point graphs. Graphs Tables of numbers are easy to understand when graphed Configure many of the graph’s characteristics, like colors and fonts.

Graphs Graph Configuration

Compare up to four measurements on one screen. Impose statistically derived trend lines. Display line, bar, area or point graphs. Configure many of the graphs characteristics, like colors and fonts. Graphs Tables of numbers are easy to understand when graphed Send the graph to a printer, graphic file on the hard drive, clipboard or pdf file.

Graphs Output Options Save to clipboard (copy/paste image into another document) Print Save to graphic file (bmp and gif formats) Save to an Adobe pdf file

Reports Status report gives detailed information about one input session, including the reading or calculation, the control limit, whether the entry is in range, corrective action and comments. Reports give ready access to the data in many ways

Reports Status Reports

Reports Exceptions Reports Exceptions report gives detailed information about the out-of-limit conditions that occurred during one input session, including the reading or calculation, the control limit, corrective action and comments.

Reports Exceptions Reports

Status report gives detailed information about one input session, including the reading or calculation, the control limit, whether the entry is in range, corrective action and comments. Reports Reports give ready access to the data in many ways Unit Summary, or Service Report, displays similar information from different units.

Reports Unit Summary Reports a.k.a. Service Report Convenient way to display similar information for different units. Generated from Table of Data. Add comments. Store for later review and editing. Customize with your company logo.

Status report gives detailed information about one input session, including the reading or calculation, the control limit, whether the entry is in range, corrective action and comments. Service Report, or Unit Summary Report, displays similar information from different units. Reports Reports give ready access to the data in many ways Visual Reporter is the ultimate, completely configurable report writer.

Select the measurements to include, and the order of display. Reports Visual Reporter

Reports Limit the display by date or data query. Select the measurements to include, and the order of display.

Reports Visual Reporter Limit the display by date or data query. Select the measurements to include, and the order of display. View the data with the restrictions in place. Get a statistical analysis of any column quickly.

Select the measurements to include, and the order of display. Limit the display by date or data query. View the data with the restrictions in place. Get a statistical analysis of any column quickly. Reports Visual Reporter Print the entire table of data, a statistical summary of the data, or both.

Select the measurements to include, and the order of display. Limit the display by date or data query. View the data with the restrictions in place. Get a statistical analysis of any column quickly. Print the entire table of data, a statistical summary of the data, or both. Reports Visual Reporter Export the table of data directly to a spreadsheet file.

Process improvement tools are built in, and are automatically available for every input and calculation. SPC Charts Statistical Process Control

Process improvement tools are built in, and are automatically available for every input and calculation. All you need to do is bracket the dates of interest, and TRACK 2 does the rest. SPC Charts Statistical Process Control

Process improvement tools are built in, and are automatically available for every input and calculation. All you need to do is bracket the dates of interest, and TRACK 2 does the rest. SPC Charts Statistical Process Control Pinpoint specific items that need to be improved.

Process improvement tools are built in, and are automatically available for every input and calculation. All you need to do is bracket the dates of interest, and TRACK 2 does the rest. Pinpoint specific items that need to be improved. SPC Charts Statistical Process Control Three different SPC charts provide an excellent view of the process over any period of time.

The primary SPC tools are X-Bar and Range charts. These identify specific problems that can help improve the process. SPC Charts X-Bar and Range Charts

Process Capability Charts help determine whether or not the process is “capable”. SPC Charts Process Capability Chart

Using TRACK 2 the CuSum Chart plots the cumulative sum of the deviations from the mean. This chart is extremely sensitive to process changes. SPC Charts CuSum Chart

Everything that can be printed in Track 2 can be sent to a pdf file, using the built-in pdf driver. Pdf Output Graphs Reports Internal word processor

Like a paper report, all of the individual pdf files can be collected into one complete report. Pdf Output And that report can be ed without ever leaving Track 2.

Everything you need to send has been built into Track 2, so getting the pdf to interested parties is easy. System

Most of the features of commercial packages are included. System

Track 2 Process Management Software No matter what your industry No matter what your job No matter what your process

versatile – model any process Track 2 Process Management Software can help you meet all of your goals and objectives with a program that is: very cost-effective powerful – calculations, trends, statistics, SPC, data queries…and more! flexible – manual & data-logged input

Track 2 Logger Track 2 is even more efficient when used with its hand-held data logger. Transfer system configurations at the touch of a button. Enter meter readings or test results where they are taken. Transfer results back to Track 2 by synchronizing with the PC.

Track 2 Logger - Completely Menu Driven

Track 2 Logger – Holds Configuration For Multiple Systems

Track 2 Logger – Enter Data In Any Order

Track 2 Logger – Synchronize With The PC To Return Results To Track 2

Track 2 Process Management Software No matter how the raw data gets into the program, there will never be a better time, or a better way, to get control of your process

For more information, or to place an order, contact us at: LXF Incorporated P.O. Box 7951 Wilmington, DE Phone: (302) Fax: (302)