System General Corp. AP350

AP350 Product Highlights Achieving the highest throughput … With the least operator intervention ! An 4 sites (4 to 16 sockets) pick-and-place Automated programming Workstation, up to 16 sockets accommodated ! Throughput up to 1000UPH with zero programming time Optional CCD inspection for marking, orientation, pin lead…… An Media Conversion Workstation to automate device media change between any two among Tray, tube and tape & Reel. An Fully Integrated one-piece-flow Workstation for all the above operations.

The Programmer inside – Model 9600 – Key Features Universal device programmer for EPROM, NOR- and NAND- type Flash memory, MCU and logic devices. Multi-linkable up to 20 sites gang programming through USB or RS232 Synchronous and asynchronous operation modes available 112 pin truly universal and state-of-the-art pin drivers, expandable to 448 pins. Universal adapter of most device packages up to 112 pins. High speed programming - 64 Mbits Flash in 26 seconds ! High speed data download through USB interface – download 128 Mbits in less than 60 seconds from PC. 512 Mbits RAM buffer standard, expandable to 4 Gigabits. Low voltage device support down to 1.2V Fully configurable programming parameters for engineers

Model 9600 Accessories Single SKB for MCU , PLD , MPU G2/G4 SKB for Flash Memory , Serial EE

AP350 Optional Advantages of AP350 – Automatic Tray Stacker 20 Trays at a time !

Tape In/Out

Tube In/Out

Label feeder

Comparison with Competitions – The Programming module System General AP350 Competitor Px388 Comparisons of Programming module Orientation High-speed, universal High speed for Flash only No. of independent Pin Drivers 112 Pins 84 Pins Future expandability Up to 448 PINs Not expandable Devices supported All memory, micro-controllers, logic and anti-fuses devices Flash memory only Support of NOR FLASH NOR/MirrorBit/Strata/Stacked/MCP, Nand. NOR/MirrorBit/Strata/Stacked/ MCP, Nand. Support of NAND FLASH Samsung, Toshiba, Micron, Hynix…. Samsung, Toshiba, Micron, Hynix Programming speed (128Mbit) Fast Model Items

Comparison with Competitions – The Handler configuration System General AP350 Competitor Px388 Comparisons of the Handler Number of sites 1 to 4 sites 4 sites Expandability Up to 16 socket 16 socket top Automated Tray stacker Holding 20 trays, optional Optional TF20 Optical position alignment In-place CCD Off-site CCD only 64Mbit Flash throughput 750 Units/Hour 700 Unit/Hour Automatic Teaching ~10 minutes, Automatic 30+ minutes, manual Non-FLASH device support Already included Need to buy and change New device support service Free Charge Yield rate fine-tuning Strategic Support Team Slow response time Model Item

Online Free Device Driver Update

Thank you !!