RIGID BODY MOTION: TRANSLATION & ROTATION (Sections )

Slides:



Advertisements
Similar presentations
Chapters 17, 18 Review. Der Innere Schweinehund (The inner Pigdog)
Advertisements

Particle vs. Rigid-Body Mechanics
Kinematics of Rigid Bodies
Chapter 15 KINEMATICS OF RIGID BODIES
CURVILINEAR MOTION: CYLINDRICAL COMPONENTS (Section 12.8)
Kinematics of Particles
“Dynamics by Hibbeler,” Dr. S. Nasseri, MET Department, SPSU Today’s Objectives: Students will be able to: 1.Apply the three equations of motion for a.
PLANAR RIGID BODY MOTION: TRANSLATION & ROTATION
RIGID BODY MOTION: TRANSLATION & ROTATION (Sections )
RIGID BODY MOTION: TRANSLATION & ROTATION
EQUATIONS OF MOTION: ROTATION ABOUT A FIXED AXIS (Section 17.4)
PLANAR KINETIC EQUATIONS OF MOTION: TRANSLATION (Sections )
Chapter 16 Planar Kinematics of a Rigid Body
Chapter 8: Rotational Kinematics Lecture Notes
Normal-Tangential coordinates
Ch. 16: Rigid Body Kinematics
Chapter 10 Rotation Key contents
Plane Motion of Rigid Bodies: Forces and Accelerations
MAE 242 Dynamics – Section I Dr. Kostas Sierros.
PLANAR RIGID BODY MOTION: TRANSLATION & ROTATION
PLANAR RIGID BODY MOTION: TRANSLATION & ROTATION
Kinematics of Rigid Bodies
RELATIVE MOTION ANALYSIS: ACCELERATION
Objective Rectangular Components Normal and Tangential Components
MAE 242 Dynamics – Section I Dr. Kostas Sierros.
Lecture 18 Rotational Motion
Chapter 10 Rotation of a Rigid Object about a Fixed Axis.
ENGR 214 Chapter 15 Kinematics of Rigid Bodies
AP Physics C: Mechanics Chapter 11
Kinematics of Particles
Chapter 10 Rotation.
NORMAL AND TANGENTIAL COMPONENTS
Chapter 2 – kinematics of particles
MOTION RELATIVE TO ROTATING AXES
RELATIVE MOTION ANALYSIS: VELOCITY
2008 Physics 2111 Fundamentals of Physics Chapter 10 1 Fundamentals of Physics Chapter 10 Rotation 1.Translation & Rotation 2.Rotational Variables Angular.
PLANAR KINEMATICS OF A RIGID BODY
Chapter 10 Rotational Motion.
MOMENT OF INERTIA Today’s Objectives: Students will be able to: 1.Determine the mass moment of inertia of a rigid body or a system of rigid bodies. In-Class.
EQUATIONS OF MOTION: ROTATION ABOUT A FIXED AXIS Today’s Objectives: Students will be able to: 1.Analyze the planar kinetics of a rigid body undergoing.
9 rad/s2 7 rad/s2 13 rad/s2 14 rad/s2 16 rad/s2
EQUATIONS OF MOTION: ROTATION ABOUT A FIXED AXIS Today’s Objectives: Students will be able to: 1.Analyze the planar kinetics of a rigid body undergoing.
PLANAR RIGID BODY MOTION: TRANSLATION & ROTATION
Today’s Objectives: Students will be able to: a)Apply the three equations of motion for a rigid body in planar motion. b)Analyze problems involving translational.
RELATIVE MOTION ANALYSIS: VELOCITY
Today’s Objectives: Students will be able to: a) Resolve the acceleration of a point on a body into components of translation and rotation. b) Determine.
EQUATIONS OF MOTION: ROTATION ABOUT A FIXED AXIS
CHAPTER 8 Rotational Kinematics. Go to this page on your laptop or computer: ◦ ms/Labs/ClassicCircularForceLab/index.html.
Today’s Objectives: Students will be able to: 1.Describe the velocity of a rigid body in terms of translation and rotation components. 2.Perform a relative-motion.
KINEMATICS OF PARTICLES RELATIVE MOTION WITH RESPECT TO TRANSLATING AXES.
Chapter 17 Rigid Body Dynamics. Unconstrained Motion: 3 Equations for x, y, rotation.
Chapter 10 Lecture 18: Rotation of a Rigid Object about a Fixed Axis: II.
DYNAMICS VECTOR MECHANICS FOR ENGINEERS: DYNAMICS Tenth Edition Ferdinand P. Beer E. Russell Johnston, Jr. Phillip J. Cornwell Lecture Notes: Brian P.
VECTOR MECHANICS FOR ENGINEERS: DYNAMICS Seventh Edition Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University CHAPTER.
Dynamics, Fourteenth Edition R.C. Hibbeler Copyright ©2016 by Pearson Education, Inc. All rights reserved. Today’s Objectives: Students will be able to:
RELATIVE MOTION ANALYSIS: VELOCITY (Section 16.5)
RIGID BODY MOTION: TRANSLATION & ROTATION (Sections )
RELATIVE MOTION ANALYSIS: VELOCITY
KINEMATICS OF RIGID BODY
ดร. พิภัทร พฤกษาโรจนกุล
King Fahd University of Petroleum & Minerals
RIGID BODY MOTION: TRANSLATION & ROTATION (Sections )
RELATIVE MOTION ANALYSIS: VELOCITY
RELATIVE MOTION ANALYSIS: ACCELERATION
RELATIVE MOTION ANALYSIS: ACCELERATION
MEE 214 (Dynamics) Tuesday
RIGID BODY MOTION (Section 16.1)
RIGID BODY MOTION: TRANSLATION & ROTATION (Sections )
RELATIVE MOTION ANALYSIS: VELOCITY
PLANAR RIGID BODY MOTION: TRANSLATION & ROTATION
Presentation transcript:

RIGID BODY MOTION: TRANSLATION & ROTATION (Sections 16.1-16.3) Objectives : To analyze the kinematics of a rigid body undergoing planar translation or rotation about a fixed axis.

APPLICATIONS Passengers ride are subjected to curvilinear translation. Given the angular motion of the rotating arms, determine v and a experienced by the passengers? Does each passenger feel the same acceleration? How can we relate the angular motions of contacting bodies that rotate about different fixed axes?

PLANAR KINEMATICS OF A RIGID BODY There are cases where an object cannot be treated as a particle. In these cases the size or shape of the body must be considered. Also, rotation of the body about its center of mass requires a different approach. For example, in the design of gears and links in machinery or mechanisms, rotation of the body is an important aspect in the analysis of motion.

PLANAR RIGID BODY MOTION There are three types of planar rigid body motion. Translation: when every line segment on the body remains parallel to its original direction during motion. When all points move along straight lines: motion is rectilinear, when the paths are curved: motion is curvilinear translation.

PLANAR RIGID BODY MOTION (continued) Rotation about a fixed axis: all particles of the body, except those on the axis of rotation, move along circular paths in planes perpendicular to the axis of rotation. General plane motion: the body undergoes both translation and rotation. Translation occurs within a plane and rotation occurs about an axis perpendicular to this plane.

PLANAR RIGID BODY MOTION (continued) Example of body undergoing the three types of motion: The wheel and crank (A and B) undergo rotation about a fixed axis. Both axes of rotation are at the location of the pins and perpendicular to the plane of the figure. The piston (C) undergoes rectilinear translation. The connecting rod (D) undergoes curvilinear translation, since it will remain horizontal as it moves along a circular path. The connecting rod (E) undergoes general plane motion, as it will both translate and rotate.

RIGID-BODY MOTION: TRANSLATION The positions of two points A and B on a translating body can be related by rB = rA + rB/A The velocity at B is vB = vA+ drB/A/dt . Now drB/A/dt = 0 since rB/A is constant. So, vB = vA, also: aB = aA. Note, all points in a rigid body subjected to translation move with the same velocity and acceleration.

ROTATION ABOUT A FIXED AXIS RIGID-BODY MOTION: ROTATION ABOUT A FIXED AXIS When a body rotates, point P travels along a circular path. The angular position of P is defined by q. d is the angular displacement, with units of either radians or revolutions (1 revol. = 2 radians) Angular velocity, , is the time derivative of angular displacement:  = d/dt (rad/s) + Similarly, angular acceleration is  = d2/dt2 = d/dt or  = (d/d) rad/s2

ROTATION ABOUT A FIXED AXIS (continued) RIGID-BODY MOTION: ROTATION ABOUT A FIXED AXIS (continued) If a is constant (aC) by analogy: w = wO + aCt q = qO + wOt + 0.5aCt2 w2 = (wO)2 + 2aC (q – qO) qO and wO are initial angular position and angular velocity.

RIGID-BODY ROTATION: VELOCITY OF POINT P The velocity of P: v = wr, its direction is tangent to the circular path of P. In vector formulation, the magnitude and direction of v can be determined from the cross product of w and rp . rp is a vector from any point on the axis of rotation to P. v = w x rp = w x r The direction of v is determined by the right-hand rule.

ACCELERATION OF POINT P RIGID-BODY ROTATION: ACCELERATION OF POINT P The acceleration of P is expressed in terms of its normal (an) and tangential (at) components. In scalar form, these are at = a r and an = w2 r. The tangential component, at, represents the time rate of change in the velocity's magnitude. It is directed tangent to the path of motion. The normal component, an, represents the time rate of change in the velocity’s direction. It is directed toward the center of the circular path.

ACCELERATION OF POINT P (continued) RIGID-BODY ROTATION: ACCELERATION OF POINT P (continued) Using the vector formulation, the acceleration of P is a = dv/dt = dw/dt x rP + w x drP/dt = a x rP + w x (w x rP) It can be shown that this equation reduces to a = a x r – w2r = at + an The magnitude of the acceleration vector is a = (at)2 + (an)2

EXAMPLE Given: The motor M begins rotating at w = 4(1 – e-t) rad/s, where t is in seconds. The radii of the motor, fan pulleys, and fan blades are 2.5cm, 10cm, and 40cm, respectively. Find: The magnitudes of the velocity and acceleration at point P on the fan blade when t = 0.5 s.

v = wm rm = wf rf => (1.5739)(2.5) = wf(10) => wf = 0.3935 rad/s EXAMPLE (Solution:) am = dwm/dt = 4e-t rad/s2 1) The angular velocity is given as a function of time, wm = 4(1 – e-t), thus: When t = 0.5 s, wm = 4(1 – e-0.5) = 1.5739 rad/s, am = 4e-0.5 = 2.4261 rad/s2 2) Since the belt does not slip (and is assumed inextensible), it must have the same speed and tangential component of acceleration. Thus the pulleys must have the same speed and tangential acceleration at their contact points with the belt. Therefore, the angular velocities of the motor (wm) and fan (wf) are related as v = wm rm = wf rf => (1.5739)(2.5) = wf(10) => wf = 0.3935 rad/s

at = am rm = af rf => (2.4261)(2.5) = af(10) => af = 0.606rad/s2 EXAMPLE (continued) 3) Similarly, the tangential accelerations are related as at = am rm = af rf => (2.4261)(2.5) = af(10) => af = 0.606rad/s2 4) The speed of point P on the the fan, at a radius of 40cm, is now determined as vP = wfrP = (0.3935)(40) = 15.8 cm/s The normal and tangential components of acceleration of P are an = (wf)2 rP = (0.3935)2 (40) = 6.2 cm/s2 at = af rP = (0.6065) (40) = 24.3 cm/s2

GROUP PROBLEM SOLVING Given: Starting from rest when s = 0, pulley A (rA = 50 mm) is given a constant angular acceleration, aA = 6 rad/s2. Pulley C (rC = 150 mm) has an inner hub D (rD = 75 mm) which is fixed to C and turns with it. Find: The speed of block B when it has risen s = 6 m.

GROUP PROBLEM SOLVING (Solution) 1) Assuming the belt is inextensible and does not slip, aC = 2 rad/s2 2) Assuming the cord attached to block B is inextensible and does not slip, the speed and acceleration of B is aB = 0.15 m/s2

GROUP PROBLEM SOLVING (continued) 3) Since aA is constant, vB = 1.34 m/s

End of 16.1-3 Let Learning Continue