Best Product Line-Up - Patio Door Systems- Therma-Tru College Best Product Line-Up - Patio Door Systems- always make a great entrance

Patio Door Systems - Product Portfolio Therma-Tru’s Patio Door System portfolio targets all segments and price points of the market through a “Good-Better-Best” strategy Hinged Sliding Fiber-Classic® Textured fiberglass patio door system that looks and feels like wood Smooth-Star® Smooth fiberglass patio door system - pre-finished that looks like clad wood PDF Entry level patio system targeted at the production builder and the value conscious consumer Fiber-Classic® Textured fiberglass patio door system that looks and feels like wood Smooth-Star® Smooth fiberglass patio door system - pre-finished that has a traditional “French” door look Slim-Line™ Pultruded fiberglass patio door with large glass area Vinyl Entry level slider to meet production builder needs Best $1400-1800 Better $1150-1600 Good $700-840

Hinged Patio Door Systems

Fiber-Classic® and Smooth-Star®

Overview Performance Selection Full system warranty TD Standard flush-glazed Low-E insulated glass High heat composite frames Brickmould and mullions are rot and moisture resistant LVL Lock Stile Self-aligning hinges Aluminum integral mounting flange provides ease of installation Proprietary adjustable security strike plate ENERGY-STAR rated Selection In-swing and out-swing Heights: 6’6”, 6’8” and 8’0” Four factory-finished exterior colors Contoured GBG (option) and interior wood grilles (accessory) Full system warranty Fiber-Classic® Textured – Interior ready to stain or paint Smooth-Star® Smooth – Interior ready to paint TD Patio Tru-Defense Door System with Enhanced Warranty “Rider”

Hinged Patio Door Systems (FC & SS) - Components High-Heat Composite Frame, brickmold and mull post Wood lock stile and Polyurethane foam core Weatherstrip Stone Self-Adjusting Hinges Available: 7 finishes Flush Glazed Low-E Panels Adjustable Security Strike Plates Available: 6 finishes Composite Sill

Feature - Composite Adjustable Sill Higher-profile sill significantly reduces air and water infiltration Flush surface creates full contact between sweep and sill for better performance Composite construction eliminates destructive effects or water Full substrate Available in satin nickel finish In-swing composite adjustable Out-swing composite sill

Feature - High-Heat Composite Frames Solid Cellular PVC Closely matches the structure and density of pine, giving the frame the look and feel of traditional wood No raised grain No rotting, splitting or warping Withstands extreme temperature ranges Tested to withstand temperature (+200oF to –20oF) and humidity extremes Energy efficient Out performs wood and aluminum Color Matched Finish is matched to the color chosen for the panels Arctic Long-Reach compression weatherstrip in Stone color Tight seal in any weather Easily removed for finishing 4-9/16" (standard) or 6-9/16" (option) Proprietary Integral Mounting Flange

Feature - Prep / Strike Plate Standard lock-prep on all active panels 2-1/8” diameter x 2-3/8” backset Double bored for lockset and deadbolt 5-1/2” center to center Proprietary Security Strike Plate installed on frame at the lockset on units with an active panel closing to the frame (i.e., singles, center-hinged, etc). Resists 450 pounds of force Adjustable to maintain consistent weatherstrip to door contact In Yellow Zinc, Brushed Nickel, Oil-rubbed Bronze, Polished Chrome, Antique Nickel or Antique Brass

Feature - Hinges Self aligning hinges (standard) Choice of seven finishes Yellow Zinc, White, Brushed Nickel, Oil-rubbed Bronze, Polished Chrome, Antique Nickel, or Antique Brass In-swing and NRP Outswing Adjustable hinges (upgrade option) Vertical and horizontal adjustments Seven finishes to match MPLS RTA units factory prepped Installed on assembled units

Feature - Exterior Colors All units feature a factory finished exterior in a choice of one of four colors: White Stone Almond Bronze Commercial coating: Extremely durable Resists fading and chalking Can be field re-painted with minimum prep

Upgrade Option - Multi-point locking system / Kits Multi-Point Lock System NAMI Certified Results A/W/S Certified Results Lock gear is Series 300 stainless steel Self lubricating Won’t pit or corrode Mishandling device prevents damage to lock, door panel and casing Lock gear is installed in the panel Trim/handle kit shipped in a carton For installation after System is hung and finished

Upgrade Option - Multi-point locking system (cont) Handle set / trim styles Millennium Universe* Ara Heirloom Decade Venture No Handle Finishes available Brass Polished Chrome Brushed Nickel Antique Brass White Antique Nickel Oil-Rubbed Bronze *Only available in Brass and Polished Chrome

Accessory - Transom Rectangular Transom Several configurations from 2/6 singles to 9/0 Triples Fully assembled Low-E glass A 6/8 unit with mulled transom fits into same opening as an 8/0 tall unit In-swing only

Accessory - Screen Slim Profile Screen Top-Hung, Wide Profile Screen Aluminum construction 2” wide, contour profile Available pre-finished in 4 colors Top-Hung, Wide Profile Screen Heavy gauge aluminum construction 3” wide, contour profile Top hung for flawless operation Double Hinged Screen Fits on any Therma-Tru double In-swing unit

Available Configurations - Out-swing / In-Swing Singles Active Fixed 2/6, 2/8, 2/10, 3/0 Doubles Center-Hinged, Jamb-Hinged French 5/0, 5/4, 5/8, 6/0 Triples Continuous head & sill 7/6 & 9/0 All in 6/6, 6/8 & 8/0 tall

Design Pressure (DP) Ratings Out-swing Singles up to 3/0 x 6/8 = DP-80/DP-80 Singles up to 3/0 x 8/0 = DP-80/DP-70 Doubles up to 6/0 x 6/8 = DP-80/DP-80* Doubles up to 6/0 x 8/0 = DP-80/DP-70* Triples up to 6/0 x 6/8 = DP-80/DP-80 Triples up to 6/0 x 8/0 = DP-80/DP-70 In-swing Singles up to 3/0 x 6/8 = DP-45/DP-80 Singles up to 3/0 x 8/0 = DP-45/DP-60 Doubles up to 6/0 x 6/8 = DP-45/DP-80* Doubles up to 6/0 x 8/0 = DP-45/DP-60* Triples up to 6/0 x 6/8 = DP-45/DP-80 Triples up to 6/0 x 8/0 = DP-45/DP-60 *See full matrix of DP Ratings on Therma-Tru website

PDF™

Overview Performance Selection Full system warranty TD Molded open panels 4-9/16” Primed pine frame (standard) or 6-9/16” (option) Brickmould attached LVL lock stile Adjustable sill in mill finish Self-aligning hinges Proprietary adjustable security strike plate ENERGY-STAR rated with optional Low-E glass Full factory assembled Selection In-swing and out-swing Heights: 6’6” and 6’8” Flat bar GBG (option) Full system warranty TD Patio Tru-Defense Door System with Enhanced Warranty “Rider” / In-swing only and non-French Door

Hinged Patio Door Systems (PDF) - Components Energy Star rated when optional Low-E glass is selected Wood lock stile and Polyurethane foam core Weatherstrip Bronze Composite Sill Self-Aligning Hinges Available: 4 finishes Adjustable Security Strike Plates Available: 3 finishes

Feature - Composite Adjustable Sill Higher-profile sill significantly reduces air and water infiltration Flush surface creates full contact between sweep and sill for better performance Composite construction eliminates destructive effects or water Available in mill finish In-swing composite adjustable Out-swing

Feature - Hinges / Security Strike Plate Self aligning hinges available in yellow zinc, brushed nickel, white, and oil-rubbed bronze Proprietary Security Strike Plate, in 3 finishes, is installed on frame at the lockset on units with an active panel closing to the frame (i.e., center-hinged, hinged off the Jamb, etc). Resists 450 pounds of force Adjustable to maintain consistent weatherstrip to door contact

Accesory - Transom Rectangular and Elliptical Transoms For 5/0, 5/4, 5/8 & 6/0 wide Center-Mulled units Primed 4-9/16 and 6-9/16 frames Clear insulated glass only Brickmould is attached on Elliptical transoms and interior casing is available

Option - Glass Choose which lites you want installed… Clear IG Clear 10 lite GBG Clear 15 lite GBG Low-E Internal Mini-Blinds Or choose an “Open” unit for the installation of many Therma-Tru lite inserts later

Accessory - Screen Slim Profile Screen Top-Hung, Wide Profile Screen Aluminum construction 2” wide, contour profile Available pre-finished in 4 colors Top-Hung, Wide Profile Screen Heavy gauge aluminum construction 3” wide, contour profile Top hung for flawless operation Double Hinged Screen Fits on any Therma-Tru double In-swing unit

Available Configurations Singles Inswing Active 2/6, 2/8, 2/10, 3/0 Doubles Inswing Center-hinged, French or Jamb-hung Outswing French 5/0, 5/4, 5/8, 6/0 Triples Continuous head & sill Inswing only 7/6 & 9/0 All in 6/6 & 6/8 tall

Sliding Patio Door Systems

Fiber-Classic® and Smooth-Star®

Overview Performance Selection Full system warranty Standard flush-glazed tempered Low-E glass Fiberglass pultruded frame and sill LVL lock-stile Stainless steel hardware Spring-loaded foot bolt ENERGY-STAR rated Selection Heights: 6’6”, 6’8”, 8’0” Four factory-finished exterior colors Contoured GBG (option) and interior wood grilles (accessory) Full system warranty Fiber-Classic® Textured – Interior ready to stain or paint Smooth-Star® Smooth – Interior ready to paint

Sliding Patio Door Systems (FC & SS) - Components All Stainless Steel Hardware Multi-point Locking System LVL Interlock and Polyurethane foam core Available: 4 finishes Flush Glazed Low-E Panels DP-55* Performance Rated Spring-Loaded Footbolt *The DP rating on some configurations may be less than DP-55. Refer to the matrix on www.thermatru.com

Feature - Multi-point Locking System Stainless steel multi-point lock with Millennium handle set White finish (standard) Brass, Brushed Nickel, or Oil-Rubbed Bronze (optional) Compatible with Entry Systems MPLS Stainless steel tandem truck rollers All stainless steel hardware makes the product “coastal” ready as a standard offering No Handleset This allows the distributor or dealer to stock units without a lock and then add it (from their stock) in the customer’s choice of finish when the unit is shipped

Feature - Spring-Load Foot Bolt Spring-Loaded Foot bolt Locks into Sill Rail to add greater security Comes with each active panel unit Features a unique design for the strike plate to accommodate the radius riser of the DP-50 sill cap

Feature - Exterior Colors All units feature a factory finished exterior in a choice of one of four colors: White Stone Almond Bronze Commercial coating: Extremely durable Resists fading and chalking Can be field re-painted with minimum prep

Available Configurations Doubles1 5/0 & 6/0 Triples2 9/0 Continuous head/sill configuration. Quads2 10/0 & 12/0 All Systems available in 6/6, 6/8 & 8/0 tall 1 – Available in Prehung or RTA in all Heights 2 – Available in RTA only

Design Pressure (DP) Rating Doubles up to 6/0 x 8/0= DP-55 Triples up to 9/0 x 8/0 = DP-45 Quads up to 12/0 x 6/8 = DP-45 Quads up to 12/0 x 8/0 = DP-40

Accessory - Screen Slim Profile Screen Top-Hung, Wide Profile Screen Aluminum construction 2” wide, contour profile Available pre-finished in 4 colors Top-Hung, Wide Profile Screen Heavy gauge aluminum construction 3” wide, contour profile Top hung for flawless operation

Slim-Line™

Overview Performance Selection Full system warranty Tempered Low-E insulated glass Fiberglass pultruded frame and sill All fiberglass door panel Increased glass surface area Dual-point locking system Spring-loaded foot bolt ENERGY-STAR rated Factory finished interior and exterior Selection Heights: 6’6” and 8’0” Four factory-finished exterior colors Contoured GBG (option) Full system warranty

Sliding Patio Door Systems (Slim-Line) - Components Fiberglass Frame reinforced with composite blocks Dual-Point Locking System Spring-Loaded Footbolt DP-50* Performance Rated *The DP rating on some configurations may be less than DP-50. Refer to the matrix on www.thermatru.com

Feature - Sill / Rollers Sill is Stone pultruded fiberglass over a rot-resistant composite substrate Stainless steel rolling surfaces for panels and screen Heavy duty tandem-truck rollers Fully adjustable Stainless steel bearings “Coastal” package (accessory) Includes stainless steel roller assemblies, lock mechanism, strike plate and exposed fasteners

Feature - Spring-Loaded Foot Bolt Locks into Sill Rail to add greater security Comes with each active panel unit Features a unique design for the strike plate to accommodate the radius riser of the DP-50 sill cap

Feature - Keyed Dual-Point Locking System Elegant Design Featuring a Schlage Series “C” keyway 4 finishes White (standard) or Polished Brass, Brushed Nickel and Oil-rubbed Bronze (upgrade option) 20 year warranty on the finish No handleset (option) This allows the distributor or dealer to stock units without a lock and then add it (from their stock) in the customer’s choice of finish when the unit is shipped

Feature - Exterior Color The panels, frame and sill are made from strong and durable pultruded fiberglass Factory finished both sides in one of four standard colors White Stone Almond Bronze Two-tone finish choices - different interior/exterior (Option) If GBG is selected, GBG is two-tone as well

Accessory - Transom Rectangular Transoms Several configurations from 2/6 singles to 12/0 quads Up to 9/0 as a single unit 10/0 & 12/0 are two units mulled in center Architecturally correct sight-lines Fully assembled Low-E glass Mull cap, sealing fin and drip cap included A 6/6 unit with mulled transom fits into same opening as an 8/0 tall unit

Option - Glass Choose which lites you want installed… 1 lite IG 10 lite GBG 15 lite GBG Low-E Impact-rated

Available Configurations Singles1 Fixed panel MEU’s 2/6, 3/0 & 4/0 wide Doubles1 5/0, 6/0 & 8/0 Triples2 9/0 & 12/0 Continuous head/sill or boxed depending on handing configuration Quads2 10/0 & 12/0 All Systems available in 6/6 or 8/0 tall 1 – Available in Prehung or RTA in all heights, excludes impact units, and 4/0 Panel Units 2 – Available in RTA only

Design Performance (DP) Ratings Singles up to 3/0 x 8/0 = DP-50* Singles up to 4/0 x 8/0 = DP-30* Doubles up to 6/0 x 8/0= DP-50* Doubles up to 8/0 x 8/0= DP-35* Triples up to 9/0 x 8/0 = DP-50* Triples up to 12/0 x 8/0 = DP-30* Quads up to 12/0 x 6/6 = DP-35* Quads up to 12/0 x 8/0 = DP-30* *See full matrix of DP Ratings on Therma-tru website Available with Tru-Defense™ Impact Rated Glass – DP-50 rated

Vinyl

Overview Performance Selection Full system warranty 7’8” insulated glass Welded PVC frame and sash, fully assembled and ready to install Aluminum stiffener on lock stile Dual-point locking system Fully adjustable tandem rollers ENERGY STAR-rated with optional Low-E glass Fully assembled Selection Height: 6’6” Full system warranty

Sliding Patio Door Systems (Vinyl) - Components DP-50* Performance Rated PVC Frame and Sash with 7/8” Insulated Glass Twin-Point Locking System Vinyl is Energy Star rated when optional Low-E glass is selected *The DP rating on some configurations may be less than DP-50. Refer to the matrix on www.thermatru.com

Feature Galvanized steel stiffeners at the panel meeting rails Increased strength and dimensional stability SGD-R50 structural rating (DP50) Maintains alignment of inter-lock weather seals Heavy Gauge Steel Stiffener Inter-lock Weather Seal

Feature Full length aluminum stiffener in the lock rail Increased security and strength Twin-point locking handle set Keyed lock (accessory) Brass interior handle (accessory) Stainless Steel Coastal Package Kit (accessory) Stainless Steel Rollers and Fasteners

Feature The “Fixed” panel is actually part of the frame “Uni-body” technology Stronger, more dimensionally stable unit Active panel features fully adjustable tandem truck rollers Nylon rollers for virtually silent, smooth operation Steel bearings for long life

Feature 7/8” Clear insulated glass standard, or choose… Clear 15 lite GBG with contoured grid (option) Low-E (option) Low-E 15 lite GBG with contoured grid (option) Duo-Durometer glazing stops Positive sash to glass seal No “squeeze-out” to clean off the glass

Feature Anodized aluminum sill cap and active panel mono-rail rolling track Corrosion resistant Long life A quality extruded aluminum screen included on every active panel unit Easy-glide rollers Fiberglass mesh screen Locking handle

Available Configuration / Design Pressure Rating Double 5/0, 6/0 & 8/0 6/6 tall (actual unit height = 79-1/2") Design Pressure (DP) rating Doubles up to 8/0 x 6/6 = DP-50

Patio Door Configurator

Thank You

APPENDIX

INTEGRAL MOUNTING FLANGE INSWING WALL INTEGRAL MOUNTING FLANGE BRICKMOULD JAMB SCREEN TRACK

INTEGRAL MOUNTING FLANGE INSWING STUCCO INTEGRAL MOUNTING FLANGE BRICKMOULD JAMB

INSTALLATION FLANGE OUTSWING WALL JAMB BRICKMOULD

OUTSWING STUCCO INSTALLATION FLANGE JAMB BRICKMOULD

INSTALLATION FLANGE OUTSWING JAMB

Why Pultrusion? Effective The pultrusion process is one of the most effective methods for the production of composite lineal profiles Efficient It is a continuous automated process that produces little waste Excellent It produces materials of consistent strength and uniform quality High Strength 1-1/2 times the strength of structural rated fir lumber Superior Insulation 37 times a better insulator than aluminum Light Weight 30% lighter than aluminum Durable Will not dent or deform like wood and aluminum

The Pultrusion Process

Reinforcement Dispensing Continuous fiberglass “rovings” are dispensed from center pull packages Porcelain eyelets eliminate static build-up and degradation of glass Fiberglass passes through a carding index that orients the fibers

Resin Impregnation The reinforcements are then drawn through the wet-out tank Pan guides keep the roving separated and maintain tension on the strands to permit the resin to wet-out each fiber

Preforming Section Saturated roving exits the resin bath and pass through a series of bushings or forming guides Excess resin is stripped off Fiberglass takes form for next stage

Curing Die Fiberglass enters heated steel dies that are in the shape of the final composite Die is heated by electric strip heaters or platens on top or bottom of the die surface Chrome plated interior die surfaces for increased die life and improved surface finish

Clamper/Puller Composite is pulled through the entire process by a gripper/puller system

Cut-off Process Diamond abrasive cut-off saw cuts composite to length Synchronized with movement of the pullers Activated by a preset cut-to-length limit switch