PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. -Square Elbow with turning vanes CHAPTER 009-i

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Square elbow W+350mm W+200mm Cover bottomCover top 1 Aluminium tape LN Draw the template of the cover bottom and cut toward “EXTERNAL”.

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 2 Cut the walls and make the female before of to glue. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 3 Glue Glue all the sides cut at 45º Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 4 Aluminium tape Exterior face Unite the four sides with aluminum tape for the exterior. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 5 Interior face Rotate the piece in position with the interior face up. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 6 Close the first side in position 90º vertical. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 6 Close the second side in position 90º vertical. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 7 Close the third side. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 8 Place the interior walls. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 9 Silicon inside Pressing Aluminium tape To press, to tape, to clip and to make the male. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 10 Insert the kit “Turning Vanes”. Square elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. 10 Insert the kit of “Turning Vanes”. Reinforcement disk Tierod M6Nut M6 Square elbow