Power Generation Group Sustainable Solutions in Energy and Environment Power Generation Group

Businesses THERMAX Boilers & Heaters Cooling & Heating Power Generation Chemicals & Water Air Pollution Control Renewable Boiler & Heater Large capacity power boilers Thermal oil / water heaters Package boilers Energy recovery systems Cooling Exhaust & Multi-energy fired chillers Steam fired chillers Hot water fired chillers Direct fired chillers Turnkey Power Plants Solid fuel based Gas based combined cycle Waste heat recovery based RE based incl. Biomass, Bagasse, solar, etc. O&M of power plants Chemicals Ion exchange resins Cooling water chemicals Fireside chemicals Polyelectrolyte Water and wastewater Wastewater & Effluent water treatment systems Water recycling Waste management Enviro ESP & Bag filters Scrubbers Air purification Retrofit & Revamp Solar Heating Cooling Heating Steam/Hot water power plants Packaged solid/oil/gas fired boilers Fired thermic fluid heaters Exhaust waste heat recovery boilers

At Power Generation Group Effluents: 35+ years in effluent treatment plants, ASTP, CTBD, etc Water: Over 35 years in supplying water treatment plants …set up Power Plants. . . Input Output Air pollution: 32+ years in supplying ESPs, bag filters, etc Fuel combustion: 40+ years experience in firing over 100+ fuels Output Input Operation & Maintenance services including manpower, consumables spares, etc ….to generate Power Thermax in-house manufacturing

Setting up power plants on Turnkey (EPC) basis Design Detailed Engineering Supply Project Management O&M Management Erection & Commissioning Performance Guarantee On Site Training RISK MITIGATION WORLD CLASS EQUIPMENTS & SERVICES SINGLE POINT CONTACT Manufacture

Our offerings (contd..) 1.Turnkey/ EPC (Engineer–Procure–Construct) solutions Fossil fuel fired power plants Solid fuel (coal/ peat/ lignite/ petroleum coke/washery rejects, etc) using pulverized (PC)/ fluidized bed (AFBC/ CFBC) boilers Liquid/ Gaseous (Natural gas/ Naphtha) Power plants based on waste heat recovered from Sponge Iron (DRI) kilns Cement manufacturing process Coke oven battery Blast furnace Smelters Biomass based power plants using grate (Traveling Grate/ Dumping Grate/Pin Hole Grate)/ bubbling bed boilers Open cycle to closed cycle conversion through heat recovery steam generators (HRSG) Solar PV/ CPV and solar thermal power plants

Our offerings (..contd) 2. Power projects on BOOT (Build–Own–Operate–Transfer) basis for Biomass Waste heat recovery Distillery spent wash 3. FEED (Front End Engineering & Design) for power plants 4. Operation & Maintenance (O&M) of power plants and guarantee on: Efficiency Heat rate Availability Gross Power Aux Consumption

Our strengths ENGINEERING PROJECT MANAGEMENT MANUFACTURING PROCUREMENT *Manufacturing in conformation to international standards & codes like ISO 9001 : 2000, ISO:14001, ASME, DIN *Shop floor approved by reputed third party engineering organizations *Equipped with latest software for GT Pro, ST Pro, STAAD, Smart Plant *Projects designed to meet international standards *Experience of working with all major power project consultants *Advanced project management tools & satellite based communication system for on-site progress monitoring. *Strong focus on health, safety & environment (OSHAS) *Highest record of bonuses for on time completion PROCUREMENT TECHNOLOGY KNOW HOW *Strong working relationship with tier- 1 vendors of critical packages *Wide database of domestic and overseas vendors having undergone our stringent approval processes *Partnerships and strategic alliances like B&W, SPX, Taiheiyo Engineering *Dedicated R&D lab

Our experience More than 35% equipments are manufactured in-house Over 70 projects on EPC basis 25 projects under long term O&M contracts 8000+ MW equivalent cumulative generation from boilers commissioned by us Over 300 WTP’s treating water for power plants More than 500 ESP’s for power generation serving over 5000 MW of power generation capacity

Our IT enablers State of the art software such as 3D Modeling, GT Pro, ST Pro etc to simulate data. Software such as CEASAR II & STAAD PRO are used for piping stress & structural analysis. Advanced project management tools such as Primavera, MS Projects. International engineering standards of ASME, IBR,PED, AGA, Gost adopted. Software such as Smart Plant are utilized to simulate real time conditions.

Our sub-groups -Contracted 2 projects Large Power Plants Group -EPC of BOP upto 1200 MW Large Power Plants Group 350 MW (Unit size) Medium Power Plants Group Contracted over 56 projects POWER DIVISION 3 MW (Unit size) Small Power Plants Group Contracted 14 projects O&M Group Contracted over 25 projects Team of experts focused on addressing wide range of capacity requirements

Thermax advantage Over 70 Projects on EPC Recipient of many bullet bonuses Over 70 Projects on EPC Wrap Around Guarantees Ability To attract and mobilize resources Fixed Cost & Schedule 35% Equipments manufactured In house Alliance with reputed vendors

Profile of some of our projects Meenakshi Energy Private Limited (2 x 150 MW) CFBC boiler based power plant

Profile of some of our projects Madras Cement Limited (2 x 36 MW) AFBC boiler based power plant

Profile of some of our projects Arvind Mills Limited (55 MW) Gas/ Naphtha based cogeneration/ trigeneration plants

Breakthrough projects Tata Sponge Iron Limited – One of the first plants in India to earn benefits from carbon credits Kalpataru Power Transmission Limited – First biomass project in the world and the first project from India to be registered for CDM benefits JK Cement Works, Nimbahera – Amongst the first projects in India to utilize the low temperature cement waste flue gas for power generation and eligible for CDM benefits National Cement Company, Yemen – First solid fuel based plant in Yemen for the cement industry

Other prestigious projects ONGC Mangalore Petrochemicals Limited – 72 MW Grasim Industries – 96 MW Indian Metals & Ferro Alloys – 120 MW Steel Authority of India Limited – 42.5 MW Madras Cement Limited – 157 MW Number of projects handled by Power Generation Group* Projects commissioned (45 projects) 985 MW Projects under execution (27 Projects) 1127.7 MW * As on 1st of April 2011

International experience Client Configuration Sector Offering Status Bataan 2020, Philippines 1 x 12.5 Cogen Paper EPC Commissioned in 2009 Under Thermax O &M Lamsan Inc., Philippines 1 x 3.5 Cogen Corn Starch Supply + Supervision Under Execution (Thermax has completed 100% supply) National Cement Co., Yemen 1 x 28 ( 2 Boilers + 1 Turbine) Cement Under Execution Yemen Co for Sugar Refining, Yemen 1 x 13.5 Cogen Sugar

Power Generation Group offers O&M services to 26 projects (1873MW) * O&M experience Nuclear Power Corporation of India Limited (NPCIL) Bharat Oman Refineries Limited Hindustan Zinc Limited Gupta Energy Limited Philippine Trade Center, Inc. Power Generation Group offers O&M services to 26 projects (1873MW) * *As on 1st of Sept 2011

Think Power Plants Think Thermax Contact Mr. Vivek Taneja (Head – Business Development) Email: vtaneja@thermaxindia.com salespower@thermaxindia.com Contact No.: +91-20-66414000