Vacuum Box Systems
Vacuum Box Leak Detection Systems
Vacuum Box To compliment our tank inspection equipment, Silverwing manufacture an extensive range of vacuum box systems
Vacuum Box Vacuum Boxes are available for both floor-plate lap welds and shell to annular welds
The open edge of the vacuum box incorporates a soft but hard wearing neoprene seal so a vacuum can be generated within the box
Vacuum Box All vacuum boxes are fitted with a calibrated vacuum relief valve to prevent damage or injury due to excessive vacuum.
Two main types of Vacuum Box systems are available: Standard High Pressure models produce a vacuum of 20 inch Hg for detection of smaller leaks
Two main types of Vacuum Box systems are available: low pressure models produce a vacuum of 10 inch Hg and are best suited for new tank builds where large leaks are the main concern.
Vacuum boxes can be configured to run from an electric vacuum pump or from a compressed air supply
The V600E electric vacuum pump eliminates the need for a compressor Vacuum Box The V600E electric vacuum pump eliminates the need for a compressor
The simple Vacuum Box test is highly effective and provides a rapid and economic way of evaluating the Integrity of all types of weld
www.silverwinguk.com Silverwing NOT OPERATOR DEPENDENT TECHNOLOGY DRIVEN