It costs no more to build a house with a good plan, than one with a poor plan…….in fact, it may cost less.

Slides:



Advertisements
Similar presentations
Floor Plans and Furniture Arranging
Advertisements

Architectural Drawing
Interior Design FCS Intro.
Architecture CAD living sleeping service SPACE PLANNING
Floor-Plan Dimensions and Notes
Interior Zones and Floor Plans you will need a book
Room Sizes and Relationships
FLOOR PLAN BASICS.
13 Floor Plans Chapter Permission granted to reproduce for educational use only.© Goodheart-Willcox Co., Inc. Objectives List the information required.
INTD 50A floor plan considerations.
Design and Function of Interior Space
Weekend Cabin Retreat Project Designing the Floor Plan
Competency: Draw Floor Plans Objective: Demonstrate the rules and standards for electrical fixture placement.
Elevations.
Blue Prints.
Designing Functional Interiors &
Understanding House Plans
Custom Home Design Project
WAINAINA PATRICK NJENGA. * The floor plan: is a view looking down a horizontal plane that is cut through a building from above about 1.5m, illustrating.
Types of Drawing Kitchen DesignElectrical Plan.
Homes have gone from an average 1,695 sq. ft in 1974 to 2,349 sq. ft. in 2006, even though family size has decreased. 19 % say the kitchen is the most.
Understanding Floor Plans
Drafting and Dimensioning the Architectural Floor Plan
After studying this unit, you will be able to: Interpret architectural drawings Describe how computers can assist in understanding house plans Organize.
Chapter 13 Floor Plans. Chapter 13 Floor Plans.
It costs no more to build a house with a good plan, than one with a poor plan…….in fact, it may cost less.
Floor Plan Considerations
Floor Plans. Changing Housing Needs  Social trends shape needs  Economic conditions, lifestyle, physical needs and technology affect changes  Large.
Architectural Terms and Features
Agenda 10/6/11 Objective: Identify Electrical symbols Learn how to draw basic floor plans and elevations Agenda Quiz on Symbols Lecture on basic floor.
Space Planning Written by Helen Hawver Georgia CTAE Resource Network 2010 Reference: or_design/plan/plans.htm.
Space Planning Chapter 7 and 16.
Objective 7.06 INTERPRET simple drawings. Draw the symbols onto graph paper. Cut out each symbol and glue onto a notecard.
LIVING AREAS. Living area Part of the house that friends and guest see. It is usually a place of show, recreation and entertainment. It roughly consumes.
Introduction to Plan of a building Instructor Engr Kamran Khan Department of civil engineering City University Peshawar.
DRAF 70 floor plans—scaling & dimensioning.
Floor Plan Sketch on 17” x 22” Graph Paper  Rough Scale Drawing  Room dimensions  Room Names  Basic House Characteristics AutoCAD floor plan including:
 Function:  How a space will be used.  Dictates the selection and arrangement of furniture.  How can you combine functions with furniture arrangement?
Furniture Arrangement & Traffic Patterns
Drafting 2 (Arch) Quiz Review #3 Quiz Review. 1.Dashed lines that follow the counters in a kitchen floor plan most likely represent: A dishwasher Upper.
Intro to CAD Final Exam Review. Identify two rooms that make-up the quiet zone of a house.
+ Family Rooms, Entryways, Patios, Porches, Courts By, Brylee, Tara, Shelly, Lily.
Residential planning. Zones Social: public area and most used portion of the home. Comprised of the entry, family room, living room, media room, game.
House Project.
Drawing to Scale Tab 3 Notes Introduction to Floor Plans & Blueprints Every home is built from a unique set of plans, traditionally called blueprints.
Standard  Students will prepare residential floor plans.
The art and science of designing and construction of buildings.
Drawing Floor plans.
Architectural Terms and Features
Interior Space Planning Floor Plans
Drawing Floor Plan.
Activity Zones.
Competency: Draw Floor Plans
Floor Plans.
Bell Work- Review What are the three types of floor plans?
Interior Zones and Floor Plans
Interior Design Designing Functional Interiors & Floor Plans
Understanding Floor Plans
Interior Zones and Floor Plans
Developing a Design Plan
Room Sizes and Relationships Gateway – Unit 7 – Green Architecture
Architectural Drawing
Housing Interior Zones and Floor Plans
Competency: Draw Floor Plans
Floor Plan A horizontal section view of a structure taken about 4’ from floor level, It shows all exterior and interior walls, doors, windows, patios,
Week 5 Drafting and Dimensioning the Architectural Floor Plan.
Factors in residential design/Traffic patterns
Floor Plans and Symbols
Competency: Draw Floor Plans
Presentation transcript:

It costs no more to build a house with a good plan, than one with a poor plan…….in fact, it may cost less.

Two-dimensional diagram of one or more rooms as if seen from above.

A Floor Plan is Used to: A. Judge space dimensions in a room B. Determine architectural detail placement in a room C. Study suitability to lifestyles of the family ▪ Shows basic living zones D. Putting together a decorating plan for the home

A Floor Plan Shows A. Exterior and interior walls B. Size and location of walls, windows, and doors C. Built-in cabinets and appliances D. Permanent fixtures E. Stairs and fireplaces – if included in the plan. F. Porches, patios, and decks G. Room names, closets, and approximate sizes

 Shows a vertical view of the room, wall, or house as if being seen by someone standing on the ground or floor and looking at it.

1/4” = 1’ is the most common scale used in architectural and interior design drawings 1 square= ¼ inch= 1 foot Templates are drawings, symbols, cutouts etc., used to easily duplicate “too scale” items. 11’ x 10’ Room

Windows= Doors= Closets=

Windows= Doors= Closets=

Separate rooms enclosed by walls with an entry door.  Benefits: noise reduction, privacy  Drawbacks: costly, breaks up space to make it appear smaller

Fewer interior separating walls (bathroom is the exception)  Benefits: saves cost of building material, home tends to appear more spacious  Drawbacks: no privacy, high noise levels  -flow-design-video/index.html -flow-design-video/index.html

Make a list of your NEEDS and your WANTS.  Needs MUST be filled  You may not have enough money to fulfill all your wants. 4 Housing Needs:  Enough bedrooms  Enough bathrooms  Storage and closets  Room for furniture and appliances

 Well defined 3 basic Areas/zones  Efficient Traffic and circulation patterns  Use and function of rooms relationships  Plenty of Storage Space Consideration  Sizes and shapes of rooms  Useable wall space that is not broken up with windows and doors  Plumbing Lines located near one another

 Indoor and outdoor space  Street noise and traffic  Privacy inside and outside the house  Housing Orientation = Placement of the house in respect to:  Compass Directions ▪ (North, South, East, West)  View  Sun exposure  Wind  Other Surroundings

 A Rectangle  Jogs or irregularities in shape increase the cost of the house and should be carefully judged for convenience and aesthetics.

 A conservative estimate for the amount of money to be spent on a home is 2 ½ times the yearly income of the family.  Cost of the home is determined by:  Cubic foot (size)  Location of lot, size, and placement, compass direction  Type of construction  Exterior and Interior finishes and fixtures  Floor Plan

 6. Interpret Blue Print Symbols Use the blue print key to decipher the blue prints on this floor plan.  7. Floor Plan Practice Room Using ¼” graph paper and a pencil, measure and draw the following dimensions. Remember… walls are six inches thick (1/8” scale).  North Wall- 15 feet with one 6 foot window, 2 outlets  South Wall- 15 feet with two 3 foot window, 1 outlet  East Wall- 20 feet with one 3 foot door that swings into the room, one outlet, 1 light switch  West Wall- 20 feet, a wall light, a closet with bifold doors. Place a ceiling light in the center room. Now trace everything with a black marker and a ruler, using very straight lines. Write the dimensions of each wall and label the north wall.  8. HOMEWORK – Walk through a house and evaluate.

 1.Which statement about floor plans is true? A.The purpose of a floor plan is to show the three-dimensional appearance of rooms, doors, windows, storage areas, and hallways.  B.The purpose of a floor plan is to show the two-dimensional appearance of rooms, doors, windows, storage areas, and hallways  C.It shows the distance between the kitchen wall and base cabinets.  D.The work triangle between the refrigerator, the table, and the range is shown.  2. Identify these floor plan symbols:   WH

 1.Which statement about floor plans is true? A.The purpose of a floor plan is to show the three-dimensional appearance of rooms, doors, windows, storage areas, and hallways.  B.The purpose of a floor plan is to show the two-dimensional appearance of rooms, doors, windows, storage areas, and hallways.*  C.It shows the distance between the kitchen wall and base cabinets.  D.The work triangle between the refrigerator, the table, and the range is shown.  2. Identify these floor plan symbols:  1.Lavatory Sink 2. Shower 3. Kitchen sink 4. Fixed Window 5. French Doors  outlet 7. Water Heater