Hebei Metal Enterprise Co., Ltd. Formerly known as Anping Yilian Wire Mesh Machinery Factory. Yilian was established in 1995 by Mr. Duan. Our Machine won high praise all over China and our factory begin to think about entering into the international market. In 2003,with the police of “Going out ”,wire mesh exporting also reaches its climax!, in 2004, after a series of founds, equipment's, workers etc. investments, Hebei Metal Enterprise Co., Ltd was established and started the exporting of wire mesh machinery worldwide. Till 2012,Metal has dev eloped into a company with 3 engineers, 70production line workers, 25 production assembly work ers, 5 after-sale maintenance personals. With International quality management system certificate ISO9001: 2008 and CE certificate provid ent and our professional quality control worker’s effort, our products have been exported to more than 30 countries and regions, such as the United States, canada, Russia, Uzbekistan, Azerbaijan, Turkey, Iran India, Brazil, Pakistan, Saudi Arabia, Jordan etc. Our factory is about 300 km away from Beijing and Tianjin, and you are welcomed to visit our factory anytime.

Through Wire Drawing Die Drawing Take Down Wire Pointer Rust Removal

Type Wire Dia. (mm) ﹥ ф12 ﹥ ф10 ﹥ ф8 ﹥ ф6.5 Coiling Block Outside Dia. (mm) ф600ф500ф400ф350 Speed (Turn/Minute) 25 Motor (Kw) Voltage (V) 380 Weight (Kg) Power : With Jiang Sheng motor, low energy consumption, good stability and adopt to long hours work need. 2.Speed control system: GB horizontal Reducer, operation is convenient and more Safety. 3.Structure: Integrated design and no need to install,There will not break wire and stable quality. 4. Control: With the world's most state-of-the- art electronic control system, can be Evitable overload, under load, lack of phase, short circuit, overheat protection. 5.Traction roll: with special high-strength wire drawing machine and cold-rolled ribbed steel bar production line the traction reel.

Coiling Block No.543 Coiling Block Outside Dia. (mm) 300/550 Max. Inlet Wire Dia.(mm)6.5 Min. Outlet Wire Dia.( (mm) Molds (Piece)543 Speed (m/min) Motor (KW)37.544kw34.5 Lubrication MethodDrawing Powder  This machine is suitable drawing wire like low/high carbon wire, copper wire, aluminum wire etc.  The finish wire is mainly used for weaving, construction, galvanized, and can also supply water tank wire drawing machine to drawing thin wire.  Transmission system: the machine by multiple reel separately with horizontal engine with V-belt drive.  Drawing process at once, so the production of high-efficiency, low-cost, simple operation and management. In order to meet the needs of users.  Our factory can be equipped with a single, or even two, even three, even five whole composed.

TypeWT - XWT - Z Max. Inlet Wire Dia.(mm) Min. Outlet Wire Dia. (mm) Coiling Block Outside Dia. (mm) Speed (Turn/Minute) Motor (Kw)13.23 Molds (Piece) Lubrication MethodWater  This machine is suitable drawing wire like low/high carbon wire, copper wire, aluminum wire etc.  Drawing die immersed in the saponification solution direct cooling; V-belt drive with a combination of dedicated gearbox or gear, control sub-ordinary control, frequency control, soft start control.  Put into low-cost, small footprint, reduces operator (single).

TypeLW1-8/600LW1-10/560LW1-9/450 Coiling Block Outside Dia. (mm) 600(650) Max. Inlet Wire Dia.(mm) Min. Outlet Wire Dia.( (mm) Speed (m/Minute) Motor (Kw) Weight (Kg) Outsize (mm)2000×1200× ×1100× ×820×2250  The machine consists of multiple stand-alone drawing cans with PLC program control, inverter frequency control.  The machine can be drawing low/high carbon wire, aluminum wire, copper wire and other metal wire.  This machine mainly composed of reel device bridge device, drawing die box pulley device, cooling device, protective cover and rack structural components.  With ZG45 tungsten carbide brushed reel surface do mirror polished, not only hard wear and does not damage the wire surface.

Butt welding machinePoint rolling machineElectric Control box

Hebei Metal Enterprise Co.,Ltd Tel: Fax: Website: