PoE refers to the ability to carry electrical power over a standard Ethernet cable-the same one used today for transferring data. PoE allows IP telephones, WLAN APs(Access Points) and Web Cams to receive power as well as data over existing LAN cabling, without any requirement to modify the existing Ethernet infrastructure. After ratification of the IEEE802.3af standard on June 2003 for 12.95W delivery to PD, growth in PoE devices and installation has been increased, also IEEE802.3at-2009 known as PoE+ or PoE Plus for higher power delivering 25W to PD was also ratified What is PoE(Power over Ethernet)? LAN LAN is a computer network that interconnects computers in a limited areacomputer network such as home, school, computer laboratory or office building. ARCNET,ARCNET Token RingToken Ring and other technology standards have been used in the past, but Ethernet over twisted pair cabling, and Wi-Fi are the two most commonEthernettwisted pairWi-Fi technologies currently used to build LANs.

Conventional LAN Structure Most of the remote terminals get power from AC-DC Adapters and they are not reliable in connections and expensive in installing AC outlet near them especially when installing terminals outdoors, like on the roofs or high on poles. Up to 100m

PoE enabled LAN Structure With PoE enabled, this portion(individual power supply for terminal) can be eliminated and simplified as the structure shown next page by installing PSE between Ethernet Switch – Cable and PD between Cable – Terminal and power can be transferred to terminal through Ethernet Cable together with data.

PoE enabled LAN Structure PD PSE PD Up to 100m

Key Benefits of PoE enabled LAN? Installation Cost Savings Eliminates the need for electrical outlet installation Dramatically reduces cost of deployment-saving up to $1,000 per PD No need for bulky AC power adapter Simplifies Installation Uses a single Cat5/5e/6 cable for both data and power Centralized Power Backup Continuous operation during power interruptions Centralized Power Management Devices can be remotely powered down during periods of low usage or for security purposes SAFE Power Will not damage Non-PoE devices or legacy peripherals

PoE ingredients There are two kinds of products, PSE(Power Sourcing Equipment) and PD(Powered Device) to provide PoE enabled LAN. Power Sourcing Equipment (PSE) is a device such as a switch that provides power on the Ethernet cable. The maximum allowed continuous output power per cable in IEEE 802.3af is W. A later specification, IEEE 802.3at, or PoE+ offers W. When the device is built in a switch, it's called an endspan. Otherwise, if it's an intermediary device between a non PoE capable switch and a PoE device, it's called a midspan.switch An external PoE injector is a midspan device. A Powered Device (PD) is a device powered by a PSE and thus consumes energy. Examples include wireless access points, IP phones, and IP cameras. Many Powered Devices have an auxiliary power connector for an optional, external, power supply. Depending on the PD design, some, none, or all power can be supplied from the auxiliary port, with the auxiliary port sometimes acting as backup power in case of PoE supplied power failure. PDs are usually built in WAP, VoIP, Web Camera and for the legacy devices without built in PD, PoE function can be enabled by Splitter type PDs.wireless access pointsIP phones PSE(Power Sourcing Equipment) PD(Powered Device)

PSE(Power Sourcing Equipment) Products Endspan PSE An Endspan PSE typically injects power on the data pairs (3 and 6, 1 and 2) and is available for 10/100Base-T and 10/100/1000Base-T Ethernet sources. A Ethernet Switch with built in PSE function can be an Endspan PSE. Midspan PSE A Midspan PSE is installed between a non-PoE switch and the powered device. It is limited to injecting power on the unused pin-pairs (4 and 5, 7 and 8) in a 10/100Base-T network. A midspan PSE used in conjunction with a non-powered switch gives the flexibility of inserting power where it is needed in an existing network and of modifying PoE delivery on a port-by-port basis. Midspans also simplify maintenance by retaining the separation between data and power management. Data, managed exclusively by the unpowered switch, flows through the midspan unmodified while the midspan injects PoE and manages power delivery.

Midspan PSEs by Moa-Multiport type Multiport midspan PSE, MPSE-XX, click herehere for detail 4-port PSE Module (MPSE-MOD-04) Up to 425mA(per port), IEEE802.3af 4-port PSE Integrated Module Click herehere 8-port PSE Module (MPSE-MOD-08) Up to 425mA(per port), IEEE802.3af 8-port PSE Integrated Module Click here here 8-port HP PSE Module (MHPSE-MOD-08-1) Up to 750mA, IEEE802.3af 8-port High Power PSE Integrated Module Click herehere 8-port HP PSE Module (MHPSE-MOD-08-1) Up to 750mA, IEEE802.3af 8-port High Power PSE Integrated Module Click herehere

Midspan PSEs by Moa, multiport type--continued 4-port HP PSE Module (MHPSE-MOD-04) Up to 750mA, IEEE802.3af 4-port High Power PSE Integrated Module Click herehere 8-port HP PSE Module (MHPSE-MOD-08) Up to 750mA, IEEE802.3af 8-port High Power PSE Integrated Module Click here here

Midspan PSEs by Moa-Single Port Adapter type 1-port Midspan PSE(10/100 Base-T, MPSE-4803) Single Port PSE for IEEE802.3af PoE Application. 15.3W, Click herehere 1-port Midspan PSE(up to 1000 Base-T, MPSE- 4803G) Single Port PSE for 10/100/1000 Base-T IEEE802.3af PoE application. 15.3W Click herehere High Power 1-port Mid- span PSE (10/100 Base-T, ANY4805C). Single Port PSE for IEEE802.3af/at PoE application. 24W Click herehere 1-port Mid-span PSE 1000 Base-T, ANY4807C High Power Single Port PS for 10/100/1000 Base- T IEEE802.3af/at PoE application. 24W Click herehere 1-port High Power PSE (MPSE-01-HP) Single Port PSE for High Power PoE application. Click herehere

1-port PSE Module (MPSE-MOD-01_R1) Up to 420mA, 802.3af 1-port PSE Integrated Module Click herehere 1-port HP PSE Module (MHPSE-MOD-01_R1) Up to 750mA, 802.3af/ at 1-port PSE Integrated Module Click herehere Midspan PSEs by Moa-Single Port Module type It is PSE module to be built in separated AC-DC Converter to make complete PSE

PD(Powered Devices) of PoE Modules to be built in Client’s Sets PD Module, ~13W, MPDI-MOD-xxx IEEE802.3af PD Module (Isolation Type) Click herehere PD Module, ~13W, MPDN-MOD-xxx IEEE802.3af PD Module (Non-Isolation Type) Click here here HE PD Module,~13W, MPDI-MOD-xxVHE Efficiency 85% min. IEEE802.3af PD Module (Isolation Type) Click herehere HE PD Module(~13W, MPDI-MOD-12HE) 88% min., High Efficiency IEEE802.3af PD Module (Isolation Type) Click herehere PD Module (13W, 12V, MPDN-MOD-12N) IEEE802.3af Fully Compatible PD Module (Non- Isolation Type) for IP-Camera. "Ethernet Interface Transformer with PoE is included“ Click herehere

PD(Powered Devices) of PoE Modules to be built in Client’s Sets HP PD Module, MHPDI-MOD-05 30W, 5V, High Power IEEE802.3af PD Module (Isolation Type) Click herehere HP PD Module, MHPDI-MOD-12 24W, High Power IEEE802.3af PD Module (Isolation Type) Click herehere HP PD Module MHPDI-MOD-57) 30W, 5.7V, High Power IEEE802.3af PD Module (Isolation Type) Click herehere

PD(Powered Devices) of PoE, Splitter type A splitter type PD enables easy integration of the PoE technology into legacy equipment(without built in PD). Using the same infrastructure, without making any modifications to the end points, already designed legacy devices, such as Wireless LAN AP and IP telephone sets become PoE enabled when connected to the active splitter.

PD(Powered Devices) of PoE, Splitter type 1-port Splitter Type PD (MPD-xxV-N) Splits data and power from the PoE line and transfers data and power separately to the legacy end devices. The DC voltages are as per required for end devices. About 20 thousands units have been installed in Korean public network for smart phone infrastructure Click herehere 1-port Splitter Type PD (MPD-xxV) Splits data and power from the PoE line and transfers data and power separately to the legacy end devices. The DC voltages are as per required for end devices. About 20 thousands units have been installed in Korean public network for smart phone infrastructure Click herehere

Deployment Records  Several 100k of MPSU 4803 Single Port Adapter type PSE have been deployed to supply power to WiMax AP with our PD module(13W) is built in.  About 50k of ANY4805C Single Port Adapter type PSE have been deployed to supply power to WiFi Aps utilizing splitter type PD(PD) Korean Network Infrastructure for Smart Phone.  About 20k of Dual Band WiFi Aps with our high power PDs per IEEE802.3at or PoE+ are built in have been deployed in Korea for 4G infrastructure.  Many other occasions such as Web Cams, Repeater, etc.