EDT 300 - Cabin Design Project - Roofs1 Weekend Cabin Retreat Project Roofs Sacramento City College EDT 300 Kenneth Fitzpatrick, P.E.

Slides:



Advertisements
Similar presentations
ROOFS.
Advertisements

Unit 55 Roof Finish Roof Overhangs and Cornices • Open Cornices • Closed Cornices • Cornice Soffit Systems • Covering Roofs • Asphalt Shingles • Wood Shingles.
ROOF SLOPES.
Roofs are one of a building’s primary elements and play a major part in giving a building its character. There are several different types of roof in.
Chapter 16 Roof Designs. Chapter 16 Roof Designs.
Roof Framing A Quick Primer
Carpentry Skilled Trades Ceiling and Roof Framing The most commonly used types of residential roof and ceiling construction are: Joist and Rafter.
The Structure and Materials of Roofing. Roof structures Although, theorists tried, most roofs until the 20 th century involved a sloping pitch. 40˚ or.
Competency: Draw Wall Sections
© 2006 ITT Educational Services Inc. CD230 Architectural Design & Drafting: Unit 5 Slide 1 Unit 5 Roofs.
Framing Agriculture Structures
Basic Roof Types and Roof Theory
Stair Design Weekend Cabin Retreat Project
Architectural CAD I – IM230
ROOF DESIGNS 1. TYPES OF ROOFS The roof greatly affects the overall appearance of a home. There are many standard styles from which to choose. Choose.
EXTERIORS FOR WOOD LIGHT FRAME CONSTRUCTION
Competency: Draw roof plans
Roof Design.
ROOFING MATERIALS. Prepping Materials A roof must be prepped before applying your roofing materials. Step one: Nail on Drip cap. This cap us used to prevent.
Roof Framing Unit 33.
ROOF DESIGNS. TYPES OF ROOFS The roof greatly affects the overall appearance of a home. There are many standard styles from which to choose. Choose a.
Chapter 20 Roof Plan Components.
Chapter 20 Roof Plan Components.
Gable, Gambrel, and Shed Roofs
© 2006 ITT Educational Services Inc. CD230 Architectural Design & Drafting: Unit 1 Slide 1 Unit 1 CADD Part III.
THIS IS WITH CARLIN BRIGHT Name That Style Name That Style 2 Rain Rain RainMiscellaneousPast Units
Competency: Draw roof plans
Roof Systems References:
Residential Roofing Systems
Wall and Ceiling Construction Vocabulary
Roof Types, Components & Terminology
Chapter 22 Roof Plan Components.
Roof Connection Details
Chapter 23 Plumbing Systems. Objectives After reading the chapter and reviewing the materials presented the students will be able to: Identify several.
1 Building Types. 2 Building Use and Size Buildings are available in many types and sizes. Large, specialized buildings should be planned and built by.
Common Components of a Traditional Wood Framed Building
Roof and Ceiling Framing
EDT Elevations1 Weekend Cabin Retreat Project Elevations Sacramento City College EDT 300/ENGR 306.
Chapter 22 Roof Plan Components Roof Plan Types Roof Shapes
ET 201 – Architectural Drafting Dr. Dan Trent September 28, 2015
Unit A3-9 Framing Agriculture Structures Problem Area 3 Construction Systems.
Choose a category. You will be given the answer. You must give the correct question. Click to begin.
Roof Types, Components & Terminology
EDT Cabin Design Project - Elevations1 Weekend Cabin Retreat Project Elevations Sacramento City College EDT 300 Kenneth Fitzpatrick, P.E.
After the roof design is selected, the next decision is the type of roof construction-- trusses or stick built. Trusses. Less labor to install trusses.
Residential Roof Types
Roof types. Roofs are part of the external envelope that spans the building at high level. They also have structural, weathering and insulation functions.
© Goodheart-Willcox Co., Inc. Permission granted to reproduce for educational use only 1 PowerPoint Presentation Publisher The Goodheart-Willcox Co., Inc.
APPLICATIONS OF TECHNOLOGY
Drafting 2 (Arch) Quiz Review #4 Quiz Review. 1. What is the difference between a pier and column? Bearing capacity Soil impact Concrete block Reinforcing.
Pitched Roof By PATEL ANKITKUMAR H.
Framing Vocabulary Stud: upright beams in the framework of a building
OBJ: SWBAT create a CAD Rendering of a Utility shed.
APPLICATIONS OF TECHNOLOGY
Competency: Draw roof plans
Framing Agriculture Structures
12 Chapter Roof Framing. 12 Chapter Roof Framing.
Competency: Draw Wall Sections
Competency: Draw roof plans
Warm-up 9/19/16 What template are we using?
Framing Agriculture Structures
Competency: Draw roof plans
Wood Structures Topic 6 Roof Framing Trusses
Competency: Draw roof plans
Roof Plan plan view drawing that shows the exterior roof lines of a structure.
Common Components of a Traditional Wood Framed Building
Competency: Draw roof plans
Competency: Draw roof plans
Competency: Draw Wall Sections
Competency: Draw roof plans
Presentation transcript:

EDT Cabin Design Project - Roofs1 Weekend Cabin Retreat Project Roofs Sacramento City College EDT 300 Kenneth Fitzpatrick, P.E.

2EDT Cabin Design Project - Roofs Types of Roofs u The appearance of a house is affected greatly by the roof lines and material. u The roof should compliment the structure.

3EDT Cabin Design Project - Roofs

4

5 Gable Roof u The gable roof is very popular. u Easy to build. u Sheds water well. u Provides for ventilation. u Can be used on a variety of house designs.

6EDT Cabin Design Project - Roofs

7 Hip Roof u The hip roof is slightly more difficult to build than a gable roof. u The hip roof is a very popular choice. u Does not provide for ventilation as well as gable roof. u Increased chance of leaks because of hips and valleys.

8EDT Cabin Design Project - Roofs

9 Flat Roof u The flat roof is the most economical roof to construct. u Doesn’t add much to the appearance of the house. u Requires “built-up” or membrane roof covering instead of conventional shingles. u A built-up roof consists of layers of roofing felt and tar. u Usually pitched about 1/8” to 1/2” to provide for drainage.

10EDT Cabin Design Project - Roofs Flat Roof u The flat roof is popular in warmer areas of the country where wide overhangs are desirable for shade and where little or no snow falls.

11EDT Cabin Design Project - Roofs

12EDT Cabin Design Project - Roofs Shed Roof u The shed roof is similar to flat roof but has more pitch. u Frequently used for additions to existing buildings. u A built-up roof is often required. u Pitch must be 3:12 to use shingles.

13EDT Cabin Design Project - Roofs

14EDT Cabin Design Project - Roofs Butterfly Roof u The butterfly roof has not been used widely in the past. u Provides plenty of light and ventilation. u Drainage is the problem. u Flashings must extend far up the roof to prevent leaks.

15EDT Cabin Design Project - Roofs

16EDT Cabin Design Project - Roofs Gambrel Roof u The gambrel roof is sometimes called a “barn roof”. u It has been used extensively for barns. u Provides the additional headroom required for the “Dutch colonial” building style.

17EDT Cabin Design Project - Roofs

18EDT Cabin Design Project - Roofs Winged Gable u The winged gable is a variation on the gable roof. u Ridge peaks are extended to form a point.

19EDT Cabin Design Project - Roofs

20EDT Cabin Design Project - Roofs Dutch Hip u The dutch hip is a combined gable and hip configuration.

21EDT Cabin Design Project - Roofs

22EDT Cabin Design Project - Roofs Mansard Roof u The mansard roof has not been popular for several years. u Is returning to popularity. u Is a French design. u Is more difficult to construct than hip or gable.

23EDT Cabin Design Project - Roofs

24EDT Cabin Design Project - Roofs A-Frame Roof u The A-frame is a combined wall and roof. u Originally used for cottages. u Now is used for homes, churches, and other structures.

25EDT Cabin Design Project - Roofs

26EDT Cabin Design Project - Roofs Curved Plate Roof u Similar to Folded Plate roof. u Limited residential application. u Some use in prefabricated modules.

27EDT Cabin Design Project - Roofs

28EDT Cabin Design Project - Roofs Folded Plate Roof u The Folded Plate Roof is a contemporary design. u It is finding some limited application in residential construction. u Quite popular for motels and small commercial buildings. u Many modular, prefabricated units have this type of roof.

29EDT Cabin Design Project - Roofs

30 Traditional Frame Roof Construction

31EDT Cabin Design Project - Roofs Rafters u Roof covering material is supported by roof framing. u The framing must be strong and rigid. u Roof framing consists of several distinct structural elements. u The first and most basic of these elements is the rafter.

32EDT Cabin Design Project - Roofs Rafters u Common rafters are perpendicular to the top wall plate. u They extend from the plate or beyond to the ridge of the roof. u Note that several types of rafters other than common rafters are identified.

33EDT Cabin Design Project - Roofs

34EDT Cabin Design Project - Roofs Rafters u Rafters are cut to the proper dimensions by locating the ridge cut, seat cut, plumb cuts, and tail cut. u The precise layout of these cuts is determined by u The slope or pitch of the roof. u The inside width or clear span of the building.

35EDT Cabin Design Project - Roofs

36EDT Cabin Design Project - Roofs Rafters u Terms that must be understood before calculating rafter dimensions and roof pitch are: u Rise. u Run. u Span.

37EDT Cabin Design Project - Roofs Terminology u Rise - the vertical distance measured from the top of the wall plate to the underside of the rafters.

38EDT Cabin Design Project - Roofs

39EDT Cabin Design Project - Roofs Terminology u Run - one-half of the distance of the clear span.

40EDT Cabin Design Project - Roofs

41EDT Cabin Design Project - Roofs Terminology u Clear Span - is the horizontal distance from the inside of one stud wall to the inside of the opposite stud wall.

42EDT Cabin Design Project - Roofs

43EDT Cabin Design Project - Roofs Roof Slope u Roof slope may be indicated on the drawings by: u A slope ratio diagram u A fractional pitch indicator u An angular dimension. u The angular dimension method is seldom used u It is difficult to measure as accurately as either of the other methods.

44EDT Cabin Design Project - Roofs Roof Slope u When designing a roof, use a standard roof pitch. u 3 in 12. u 4 in 12. u 5 in 12. u 6 in 12.

45EDT Cabin Design Project - Roofs Rafters u Select rafters based on u The distance to be spanned. u The spacing of the rafters. u The weight to be supported. u Rafters for low-slope roofs may also serve as ceiling joists.

46EDT Cabin Design Project - Roofs Roof Weights Per Square Foot u A “light roof” is one that weighs less than 4 lbs per square foot. u Examples: u Cedar shake roof. u Composition roof. u Metal roof.

47EDT Cabin Design Project - Roofs Roof Weights Per Square Foot u A “heavy roof” is one that weighs more than than 4 lbs per square foot. u Examples u Slate. u Clay tile. u Concrete tile.

48EDT Cabin Design Project - Roofs

49EDT Cabin Design Project - Roofs

50EDT Cabin Design Project - Roofs

51EDT Cabin Design Project - Roofs Cornice u The cornice is the overhang of the roof at the eaves line. u It forms a connection between the roof and the side walls. u In a gable roof, the cornice is formed around two sides of the building u In a hip or flat roof, the cornice is formed around all four sides of the building.

52EDT Cabin Design Project - Roofs

53EDT Cabin Design Project - Roofs Cornice u Three types in residential construction: u Open cornice u Box cornice u Close cornice

54EDT Cabin Design Project - Roofs Open Cornice u The Open Cornice may be used with: u Exposed beam construction. u Contemporary designs u Rustic designs u Rafter ends are exposed and are usually tapered or curved to prevent a bulky appearance.

55EDT Cabin Design Project - Roofs

56EDT Cabin Design Project - Roofs Three Types of Box Cornice u Narrow Box. u Wide Box with Lookouts. u Wide Box without Lookouts.

57EDT Cabin Design Project - Roofs Narrow Box Cornice u Usually between 6” and 12” wide. u The soffit board is nailed directly to the bottom side of the rafters. u Usually used for Cape Cod or colonial homes.

58EDT Cabin Design Project - Roofs

59EDT Cabin Design Project - Roofs Wide Box Cornice with Lookouts u Is usually between 6” and 12” wide. u Requires additional support members called “lookouts” for fastening the soffit u The soffit board is nailed directly to the bottom side of the rafters.

60EDT Cabin Design Project - Roofs

61EDT Cabin Design Project - Roofs Wide Box Cornice without Lookouts u Has a sloped soffit u The soffit material is nailed tot he underside of the rafters. u Frequently used where overhangs are very wide.

62EDT Cabin Design Project - Roofs

63EDT Cabin Design Project - Roofs Close Cornice u Is one in which the rafter does not project beyond the wall. u The roof is terminated by a frieze board and molding.

64EDT Cabin Design Project - Roofs

65EDT Cabin Design Project - Roofs Rake or Gable End u Is the extension of a gable roof beyond the end wall of the house. u The overhang should be about the same size as the cornice. u If a close cornice is used, a close rake should be used.

66EDT Cabin Design Project - Roofs Rake or Gable End u Wide overhangs provide side wall protection and less frequent painting. u In California, wide overhangs provide shading from hot summer sun.

67EDT Cabin Design Project - Roofs

68EDT Cabin Design Project - Roofs Roof Trusses u Roof trusses are an assembly of members that form a rigid framework of triangular shapes. u They permit wide unsupported spans with a minimum amount of material.

69EDT Cabin Design Project - Roofs

70EDT Cabin Design Project - Roofs

71EDT Cabin Design Project - Roofs

72EDT Cabin Design Project - Roofs

73EDT Cabin Design Project - Roofs

74EDT Cabin Design Project - Roofs

75EDT Cabin Design Project - Roofs

76EDT Cabin Design Project - Roofs

77EDT Cabin Design Project - Roofs

78EDT Cabin Design Project - Roofs Roof Trusses u Lightweight wood roof trusses are designed to span distances of 20 to 32 feet. u Many times trusses are less expensive than conventional framing. u Time and expense is saved.

79EDT Cabin Design Project - Roofs Roof Trusses u Prefab trusses for standard widths are readily available. u Custom trusses for non-standard dimensions are factory produced. u Most trusses are made from 2 x 4 lumber. u 2 x 6 may be used for wider spans and heavier loads.

80EDT Cabin Design Project - Roofs Roof Trusses u W-type truss u King-post truss u Scissors truss u are commonly used in residential construction.

81EDT Cabin Design Project - Roofs Roof Trusses u Most are designed to be installed at 24” on center. u Ceiling materials are nailed directly to the bottom of the truss. u Information required to make u Span u Roof pitch u Spacing of the trusses u Anticipated roof load.

82EDT Cabin Design Project - Roofs Ventilation u Adequate attic ventilation is critical. u Moisture will form on the underside of the roof sheathing and damage will result. u A well-ventilated attic will help to cool the house in the summer.

83EDT Cabin Design Project - Roofs Ventilation u Ventilation is usually achieved by louvered openings on the gable end. u Ridge ventilators are also available. u The total are of the ventilation openings should be 1/300 of the ceiling area. u 1200 sq ft. Ventilation openings at least 4 sq ft.

84EDT Cabin Design Project - Roofs

85EDT Cabin Design Project - Roofs

86EDT Cabin Design Project - Roofs

87EDT Cabin Design Project - Roofs

88EDT Cabin Design Project - Roofs

89EDT Cabin Design Project - Roofs

90EDT Cabin Design Project - Roofs

91EDT Cabin Design Project - Roofs

92EDT Cabin Design Project - Roofs Flashing u Flashing should be used where u the roof comes in contact with a wood or masonry wall. u At a chimney. u At a roof valley. u Common flashing materials: u Aluminum u Copper u Galvanized sheet steel.

93EDT Cabin Design Project - Roofs Flashing u The flashing is placed under the roofing material a sufficient distance to prevent the penetration of water. u Roof valleys u flash with metal or two thicknesses or roll type roofing. u Asphalt roofing mastic is used under the shingles adjacent to the valley to aid in waterproofing this area.

94EDT Cabin Design Project - Roofs

95EDT Cabin Design Project - Roofs Flashing u A small metal edging is normally used at the gable and eave line to act as a drip edge u Its purpose is to prevent water from entering behind the shingles and to protect the fascia boards.

96EDT Cabin Design Project - Roofs

97EDT Cabin Design Project - Roofs Gutters and Downspouts u Gutters collect the water and prevent it from running directly off the eaves and splattering the house. u Downspouts are the pipe to channel the roof water to the ground. u Copper, vinyl, aluminum and galvanized sheet steel are common materials.

98EDT Cabin Design Project - Roofs

99EDT Cabin Design Project - Roofs

100EDT Cabin Design Project - Roofs

101EDT Cabin Design Project - Roofs

102EDT Cabin Design Project - Roofs

103EDT Cabin Design Project - Roofs Roof Sheathing and Roofing u Sheathing is placed over rafters u Supports the roofing material u May be u planks u individual boards u plywood u Plywood is most common.

104EDT Cabin Design Project - Roofs Roof Sheathing and Roofing u Sheathing thickness varies with the spacing of the rafters and supporting beams. u Sheets are laid with grain perpendicular to the rafter u Joints are staggered

105EDT Cabin Design Project - Roofs Roofing u Common materials: u asphalt singles u wood shingles u tile u slate u roll roofing u copper, aluminum and galvanized sheet steel u layers of felt and tar u rubber membrane roofing

106EDT Cabin Design Project - Roofs Roofing u Factors affecting choice of material: u cost u local codes u roof pitch u design u individual preference

107EDT Cabin Design Project - Roofs