Checker 200 Series Training Presentation

CONFIDENTIAL The Checker 200 Series Versatile, multicolor lighting provides high contrast Small: 67x36x70 mm Variable working distance No tool required to focus

CONFIDENTIAL The Checker 200 Series 24 VDC USB 2.0 (1.1 Compatible) Industrial I/O –Opto-Isolated, protected from short circuit, - and reverse polarity –Can be wired either NPN or PNP Encoder based part tracking –Encoder input (Differential and Open Collector Quadrature Encoder) Supports up to 8 outputs (with optional IO Box) IP67, Quick Disconnect M12 Connectors

CONFIDENTIAL The Checker User Interface Setup Steps Status Pane Help, IO monitor, Statistics Control Pane Simple Instructions Filmstrip Recording Controls Filmstrip Playback Controls

CONFIDENTIAL Checker 200 Series Models Checker 201 –Detection and Inspection –Encoder Input Checker 202 –Includes everything in Checker 201, plus Ladder Logic Adds simple to use ladder logic for custom configuration of inspection sensors Ladder logic provides flexibility to solve many more applications: –Sorting –Applications that need an “OR” Part is good if a label is on top OR on bottom –Tie inspection sensors directly to outputs

CONFIDENTIAL New Features in the Checker 200 Series Hardware: Smaller Red-Green-Cyan lighting No screwdriver needed to focus Quick Disconnect cables USB 2.0 (1.1 compatible) Up to 8 outputs (with optional I/O Box) Additional user defined input (with optional I/O Box) Both Checker 201 and 202 support Encoder inputs

CONFIDENTIAL New Features in the Checker 200 Series Software: Run Mode Image Display –User selects the types of images to display –Ability to automatically “Freeze” image display Able to change recording type in Run Mode New filmstrip capability – Snapshot recording Longer filmstrip recordings in Setup Mode Faster upload of recorded images (with USB 2.0)

CONFIDENTIAL New Features in the Checker 200 Series Compared to the Checker 101 and 101E Software: Ladder Logic for custom results (Checker 202 only) Improved contrast sensor Monitor I/O status Ability to get an output with an External Trigger if the Part Finding Sensor Fails

CONFIDENTIAL Run Time Monitoring You can see what Checker sees while it is inspecting Choose which images to display Choose which images will make Checker’s display freeze

CONFIDENTIAL Run Time Monitoring Monitor tab shows status of each I/O point Statistics tab shows runtime pass/fail counts

CONFIDENTIAL Run Time Monitoring Monitor the status of each user-defined output

CONFIDENTIAL New Reference for Output Timing Checker 101 used the center of the image as the reference Checker 200 Series uses the center of the Region of Interest Checker 101 Reference Checker 200 Series Reference

CONFIDENTIAL Bad Part Example: “Code Fail” Coil is true Custom Ladder Logic Results Good Part Example:

CONFIDENTIAL Checker 201 –CKR with Flying Lead Cable –CKR with IO Box Cable Checker 202 –CKR with Flying Lead Cable –CKR with IO Box Cable Included in Product Kit: 5.8mm lens Checker User Interface CD Quick Start Guide Standard USB Cable Mounting Screws USB Connector Cover Focus Lock Allen Wrench Extra Lens O-Ring Checker 200 Series

CONFIDENTIAL Adjustable industrial bracket CKR- 200-BKT –Adjustable over a wide range, with lock down –¼ -20, M6 and Through-hole mounting Checker Accessories

CONFIDENTIAL Lens Kit –CKR-200-LENSKIT –3.6 mm, 8 mm, 16 mm lenses and extra O-Rings Checker Accessories

CONFIDENTIAL I/O Module –CKR-200-IOBOX –Adds 7 inputs 5 Inputs for Job Change Capability (up to 16 jobs) 1 External Pattern Retrain Input 1 user defined input –Adds 6 additional outputs Checker Accessories

CONFIDENTIAL Additional Quick Disconnect Cables –IP67 USB Cable CKR-200-CBL-USB –IO Extension Cable CKR-200-CBL-EXT Checker Accessories