Solutions! Aqueous, dissolved, soluble, dissociated, homogeneous, etc…

Recall that matter is classified and categorized: MATTER Pure Substances Elements Compounds Mixtures Heterogeneous mixtures Homogeneous mixtures Solutions

Recall that matter is classified with even more detail. Pure Substances Elements Atoms Diatomic molecules Compounds Ionic formula units (f. U.) Covalent molecules

Solutions A solution is a homogenous mixture of two or more substances in a single physical state. A solution is made up of a solute and a solvent. Solute – the substance that is dissolved (usually appears to change state – for example, sugar in water doesn’t appear to stay solid). Solvent – the substance that does the dissolving; present in greater amounts.

Types of Solutions - 1.Solids – two solids evenly mixed (ex: alloys, like gold jewelry – molten (liquid) gold and copper mixed). 2.Gaseous – two or more gases mixed (ex: air) 3.Liquid – solvent and solution are liquids; solute can be solid, liquid or gas (ex: vinegar – acetic acid in water, soft drinks – CO 2 and sugar with H 2 O).

OUR FOCUS: Aqueous - A special type of liquid solution, with water as the solvent.

The formation of Solutions The dissolving process for ionic compounds: Ionic substances (salts) are composed of ions with positive and negative charges. Cations are attracted to the negative ends of nearby water molecules; Anions are attracted to the positive ends of nearby water molecules (this is called an ion-molecule interaction). If the attraction is strong enough, the ion will be pulled away from the surface of the crystal. The ion in solution will be surrounded by a shell of water molecules.

The formation of Solutions The dissolving process for ionic compounds: Wo

An equation can be written to describe this process: CaCl 2  Ca +2 (aq) + 2Cl - (aq) When CaCl 2 dissolves in water the compound will dissociate into Ca 2+ ions and Cl - ions.

The formation of Solutions The dissolving process for covalent compounds: Covalent compounds are molecules. As with ionic compounds dissolving, there are attractions between the solute and solvent particles. Attractions may be classified as dipole-dipole forces, hydrogen bonds, or van der Waals forces. If the attraction is strong enough, an outer molecule will be pulled away from the surface of the solid. However, the molecules themselves stay intact – they are not separated like ions!

Solvation – the interaction between solute and solvent particles. Hydration – the interaction between solute and water molecules (when the solvent is water).

Highlight this (it’s important ) Energy is required to break bonds/attractions. Energy is released when bonds/attractions form. If breaking attractions requires more energy than is released in forming attractions, heat will be absorbed in the overall process  dissolving process is endothermic. If breaking attractions requires less energy than is released in forming attractions, heat will be given off in the overall process  dissolving process is exothermic.

Concentration of a Solution Concentration = the amount of solute in a given amount of solvent or solution. Concentrated – relatively lots of solute Dilute – relatively small amount of solute

We usually use the mole to help us express concentration of a solution. There are three ways to express concentration: 1.Molarity – moles of solute per liter of total solution 2.Molality – moles of solute per kilogram of just solvent 3.Percent Solutions – ratio of volume of solute to volume or solution OR ratio of mass of solute to mass of solution

MOLARITY Molarity (M) – the number of moles of a substance per liter of solution Moles of a substance = molarity (M) Liters of solution

Example 1 A chemistry teacher needs to make 500. mL of a dilute calcium chloride solution. She puts moles of CaCl2 in 500. mL of solution. What is the concentration of the solution? Calculate molarity by dividing number of moles by number of liters. (500 mL = L) M = moles = mol = 0.10 M liters L

Example 2 A household cleaner contains 10.0 g NaOH in L of solution. What is the molarity of the cleaning solution? 1.Convert grams to moles 10.0 g NaOH x 1 mol = mol NaOH g 2. Calculate molarity by dividing moles by liters Molarity = mol = mol = 2.5 M L L

Making a solution for the original solute is a simple process: 1.Determine the mass of solute needed and measure on a balance. 2.Pour the solute into the proper size volumetric flask. 3.Add enough distilled water to make the necessary amount of solution. 4.Cover the volumetric flask and mix completely by inverting.

Example A student needs to use 0.50 M Pb(NO 3 ) 2 for a lab. How many grams of Pb(NO 3 ) 2 must be used to make 250. mL of the solution? Briefly describe how the solution would be made. 1.Determine the number of moles needed to make the required amount of solution. M = mol L 0.50 M Pb(NO 3 ) 2 = x mol L X = mol Pb(NO 3 ) 2

Example, continued 2.Convert moles to grams mol Pb(NO 3 ) 2 x g = g Pb(NO 3 ) 2 1 mol 3. Briefly describe how to make the solution... Next slide…

Example, continued 3. Briefly describe how to make the solution. Measure g of lead(II) nitrate on a balance. Put solid into a 250 mL volumetric flask. Add distilled water until the flask is about half- full. Mix completely by covering and inverting. Add enough distilled water to make 250 mL of solution. Mix…

Example, continued SUMMARY… 3. Briefly describe how to make the solution. Measure g of lead (II) nitrate on a balance. Put solid into a 250 mL volumetric flask. Add distilled water until the flask is about half- full. Mix completely by covering and inverting. Add enough distilled water to make 250 mL of solution. Mix well by inversion.