Physics for Scientists and Engineers, 6e Chapter 35 – The Nature of Light and the Laws of Geometric Optics

impossible to determine In the movies, you sometimes see an actor looking in a mirror and you can see his face in the mirror. During the filming of this scene, what does the actor see in the mirror? his face your face the director’s face the movie camera impossible to determine 1 2 3 4 5

The light rays from the actor’s face must reflect from the mirror and into the camera. If these light rays are reversed, light from the camera reflects from the mirror into the eyes of the actor.

If beam 1 is the incoming beam in Figure 35 If beam 1 is the incoming beam in Figure 35.10b, which of the other four red lines are reflected beams and which are refracted beams? Only beam 2 is reflected. Only beam 4 is reflected. Beams 2 and 4 are reflected. Beams 2, 3, and 4 are reflected. All four of the other lines are reflected. 1 2 3 4 5

Beams 2 and 4 are reflected; beams 3 and 5 are refracted.

bends toward the normal is undeflected bends away from the normal Light passes from a material with index of refraction 1.3 into one with index of refraction 1.2. Compared to the incident ray, the refracted ray bends toward the normal is undeflected bends away from the normal 1 2 3 4 5

Because the light is entering a material in which the index of refraction is lower, the speed of light is higher and the light bends away from the normal.

the optical length of a day the geometric length of a day As light from the Sun enters the atmosphere, it refracts due to the small difference between the speeds of light in air and in vacuum. The optical length of the day is defined as the time interval between the instant when the top of the Sun is just visibly observed above the horizon to the instant at which the top of the Sun just disappears below the horizon. The geometric length of the day is defined as the time interval between the instant when a geometric straight line drawn from the observer to the top of the Sun just clears the horizon to the instant at which this line just dips below the horizon. Which is longer? the optical length of a day the geometric length of a day 1 2 3 4 5

Due to the refraction of light by air, light rays from the Sun deviate slightly downward toward the surface of the Earth as the light enters the atmosphere. Thus, in the morning, light rays from the upper edge of the Sun arrive at your eyes before the geometric line from your eyes to the top of the Sun clears the horizon. In the evening, light rays from the top of the Sun continue to arrive at your eyes even after the geometric line from your eyes to the top of the Sun dips below the horizon.

impossible to determine Lenses in a camera use refraction to form an image on a film. Ideally, you want all the colors in the light from the object being photographed to be refracted by the same amount. Of the materials shown in this figure, which would you choose for a camera lens? crown glass acrylic fused quartz impossible to determine 1 2 3 4 5

An ideal camera lens would have an index of refraction that does not vary with wavelength so that all colors would be bent through the same angle by the lens. Of the three choices, fused quartz has the least variation in n across the visible spectrum.

In the figure, five light rays enter a glass prism from the left In the figure, five light rays enter a glass prism from the left. How many of these rays undergo total internal reflection at the slanted surface of the prism? 1 2 3 4 5 1 2 3 4 5

The two bright rays exiting the bottom of the prism on the right in Figure 35.27 result from total internal reflection at the right face of the prism. Notice that there is no refracted light exiting the slanted side for these rays. The light from the other three rays is divided into reflected and refracted parts.

Suppose that the prism in this figure can be rotated in the plane of the paper. In order for all five rays to experience total internal reflection from the slanted surface, the prism should be rotated: clockwise counterclockwise 1 2 3 4 5

Counterclockwise rotation of the prism will cause the rays to strike the slanted side of the prism at a larger angle. When all five rays strike at an angle larger than the critical angle, they will all undergo total internal reflection.

impossible to determine A beam of white light is incident on a crown glass–air interface as shown in the figure below. The incoming beam is rotated clockwise, so that the incident angle θ increases. Because of dispersion in the glass, some colors of light experience total internal reflection (ray 4 in figure (a) below) before other colors, so that the beam refracting out of the glass is no longer white. The last color to refract out of the upper surface is violet green red impossible to determine 1 2 3 4 5

When the outgoing beam approaches the direction parallel to the straight side, the incident angle is approaching the critical angle for total internal reflection. The index of refraction for light at the violet end of the visible spectrum is larger than that at the red end. Thus, as the outgoing beam approaches the straight side, the violet light experiences total internal reflection first, followed by the other colors. The red light is the last to experience total internal reflection.