Multi-tasking OKUMA Multus B300W

Multi-tasking Mori-Seiki NT

Multi-tasking Mazak Integrex Mark IV

Multi-tasking Machine Definition

Multi-tasking Axis combinations

Multi-tasking Axis combinations

Multi-tasking Stock Setup

Multi-tasking Tool Setup – Define lathe tools in B=0 position.

Multi-tasking Tool Setup – Define lathe tools in B=0 position. Mazak Integrex Okuma Multus Mori Seiki NT

Multi-tasking Tool Angle – One tool can be defined to work in any possible configuration using Tool Angle Tool Angle = BA: Angle (Okuma Multus) Tool Orientation on Machine: Indexes a tool to work on Left spindle or Right spindle and for back turning on either spindle (M602 or M603- Okuma Multus)

Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Okuma Multus - M602 or M603) N220G97 G95 S=3800 M42 M602 BA=90. TL=011011

Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Mori-Seiki NT D1 or D2)

Defining Lathe tool output Tool ID Code: MR2 For consistency, the general guidelines below are suggested

Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Integrex Mark IV - Matrix) (PROGRAM NAME - MULTI-TASKING DEMO_MJR1 DATE=DD-MM-YY TIME=HH:MM - 13:47 ) (POST LICENSE - IN-HOUSE SOLUTIONS INC.) (T11 | CNMG 08 OD R | DIA | SUFFIX -.02 | INSERT - CNMG ) G21 G69 G80 G40 G18 G90 G94 M205 (UPPER TURRET) G109 L1 (T11 | CNMG 08 OD R | DIA | SUFFIX -.02 | INSERT - CNMG ) (TOOLPATH GROUP - PREP STOCK ) G21 G10.9 X1 N1 G91 G28 X0. N1 G28 Y0. Z0. M901 M202 T11.02 T11 M06 G91 G28 X0. Z0. G90 M108 G0 G90 G53 B90. M107 G54...

Multi-tasking N220G97 G95 S=3800 M42 M602 BA=90. TL= N230 M4

Multi-tasking Program: Facing / Drilling / ID Boring

Multi-tasking Misc Ops: Stock Flip

Multi-tasking Misc Ops: Stock Flip

Multi-tasking Face / Drill / ID Bore (rough) / ID Bore undercut finish

Multi-tasking ID Bore undercut N220G97 G95 S=2816 M42 M602 BA=-10. TL= N230 M4

Multi-tasking OD Rough / Finish / Plunge Cut Parameters

Multi-tasking OD Finish Back turning N220G97 G95 S=509 M41 M603 BA=90. TL= N230 M3

Multi-tasking Finish ID / Thread OD

Multi-tasking Mill slot / Transform toolpath T/Cplane TOP in Mill is C=90. BACK is C=0... N210G94 SB=2000 M241 M63 M9 BA=90. G52 TL= N220 M13 N230 G138 N240 G17 N250 M146 N260 G0 C90. N270 M147 N280 G127 B90. N290 G0 Z155. N300 X37.5 Y0. N310 Z65....

Multi-tasking Circle Mill counterbore / Drill / Tap angled holes

Multi-tasking Misc Ops: Stock Flip back to OP1 position Geometry exists already. Transfer geometry not required

Multi-tasking Stock Flip – Original position

Multi-tasking Face – Stock recognition

Multi-tasking Rough / Semi-finish ID

Multi-tasking Rough OD / Finish OD

Multi-tasking Thread

Multi-tasking Finish corners