Hoop Tech Clamp Assembly and Attachment
Contents of package
The Base of the Hoop Clamp and wing attachments
Attach as shown…
This hoop is for heavy fabrics…
This hoop is for lighter weight fabrics
Attach hoop base as shown
Make sure that the clamp is in the open position
Then Tighten the large black knob
Attach top of hoop as shown Step 1…
Step 2
Then clip other side.
Now to place on the machine…
Turn on Machine
Press “Set” to complete Frame Move
With the control panel, move the x- carriage to the back
Insert Hoop tech clamp as shown
Slide the wings under the arm clamps as shown
Complete attachment
Adjust the side bolts for the correct height left and right.
End