All About the NuCanoe

The NuCanoe is a boat that gives people a greater ability to pursue activities on the water. What is NuCanoe?

Enhance Your Ability To Fish To Recreate To Hunt To Dive To Row To Paddle What is NuCanoe?

NuCanoe Models NuCanoe 10’ NuCanoe 12’

Standard Configuration 2 Molded Bench Seats 4 Carry Handles Bow Plug Deck Rings (10’-15 / 12’-17)

NuCanoe Color Options RedYellow Desert Sand OD Green Hunter Brown Green Camo Brown Camo

Design Features Sealed Hull design provides high internal floatation and allows the NuCanoe to float even if capsized or full of water. The only access to the interior of the NuCanoe is at the bow and is sealed by a bow plug. Kiss-offs on the deck floor join the deck to the hull to provide strength and rigidity. Square Transom houses a trolling motor. Up to 2HP or equivalent motor. ¼-20 Threaded Inserts are molded into the hull. Seats, hardware, and accessories are secured via screws into these inserts. They are completely enclosed and sealed in hull.

Design Features Upright & Modular Seats provide upright and dry seating, and enable single, tandem, or triple use. Stern Hole strengths transom for use with a motor, provides a pass through for anchor rope, and enables the NuCanoe to be secured. Battery Box Storage fits a type-24 Battery Box and provides strap-down points

Design Features Mild Rocker enables responsive handling and improves maneuverability.

Design Features Dual Channels run the length of the hull to enhance the tracking and handling of the NuCanoe. Hard Chine on both sides of the NuCanoe provides significant secondary stability. Triangular Skeg at the stern end of the hull protrudes into undisturbed water to greatly improve tracking and lateral stability in the water. Wide V-shaped Hull decreases the beam of the NuCanoe at the water line to around 32-36” to decrease drag and increase hull speed and maneuverability.

Seating Options – 12’ Solo Tandem Tandem Center Facing Tandem XL Triple Triple Center Facing

Seating Options – 10’ SoloTandem Tandem Center Facing

Accessories & Rigging Accessories –Install or remove in minutes –Can be positioned in multiple locations –Fit both NuCanoe models Rigging Kits –Install via pop rivets –Hardware is permanent and can not be removed

Specs &Technical Info NuCanoe 10 NuCanoe 12 10'Length12' 42"Beam (Width)42" Waterline32-36" 13-16"Height12-16" 4-6"Draft4-6" 59 lbsHull Weight77 lbs 1-2 pplSeating Capacity1-3 ppl 450 lbsWeight Capacity525 lbs

Specs & Technical Data Manufacturing Process –The NuCanoe is a rotationally molded product. Material –The NuCanoe hull material is a high-density polyethylene compound designed for applications like kayaks or boats that require a balance very high stiffness and extreme toughness. Key features of this material are: Excellent long term outdoor weatherability (UV8); Superior balance of toughness and rigidity; Very High Stiffness; Excellent low temperature impact.

Warranty The NuCanoe is covered by a 3 year warranty against defects from workmanship and materials. In the event of defect, malfunction, or other failure of the product not caused by any misuse, modification, or damage to the product while in possession of the original purchaser, we will remedy the failure or defect, without charge to the consumer, within a reasonable period of time. The remedy will consist of repair or replacement of the product, at NuCanoe, Inc.’s option.