90 Degree Haircut (Uniform Layers)

Preparation Gather Supplies and Disinfect Station Sanitize Hands & Drape Manikin

Procedure Create a four section parting Established the guideline length around back perimeter Established the guideline length around front perimeter Connect both guidelines over the ears

Procedure Continued Establish the interior guide at top of head (near the apex) Continued cutting guideline to front hairline above the forehead Continued cutting guideline from crown to nape of the neck

Use VERTICAL partings to connect and blend top guide to bottom guideline Start at the front, working around the head to the front on the opposite side of the head, cut from top guideline to the bottom guideline (Stand behind your cutting area) Maintained a 90 degree elevation throughout procedure Use a traveling guideline to maintain uniformly layered lengths

Performed cross check of procedure for accuracy by rotating around the head in the opposite direction and this time if cutting is needed, cut from bottom guideline towards the top guideline

Apply styling products & Blow-dry

Completion Use finishing products if desired Sweep up the floor Clean and disinfect station

Finished Style