PALESTINE UNIVERSITY BUILDING MATERIAL Chapter No. 4 Timber.

Slides:



Advertisements
Similar presentations
Portal Framed Construction
Advertisements

Post and Lintel Ana Cristina Ayala.
R1.3 RESP1.3 RESPONSE OF CIVIL ENGIONEEONSE OF CIVIL ENGINEERING PROJECT 1.3 RESPONSE OF CIVIL ENGINEERING PROJECT 1.3 RESPONSE OF CIVIL ENGINEERING PROJECT.
Selecting Lumber.
Lumber Grading.
Roofing.
Chapter 2 Lumber Carpentry First Canadian Edition
Diseases and Defects Trees are living organisms so they are prone to diseases and defects. Diseases and defects affect the strength and quality of the.
TIMBER 1.
1 Defects in timber Grade 8. 2 objectives What are defects in timber Types of timber defectives knots Shakes Waney edge Dry rot.
CRAFT & DESIGN SOLID TIMBER Woods are classified into two main groups, softwoods and hardwoods. You should try to understand the main differences between.
Conversion of Timber. Trees are cut down during winter as there is less growth, therefore less sap After felling trees are transported to sawmills to.
timber 7. H E A D L I N Carpentry General Advantages of Timber
Timber - the Material Timber grows on Trees Properties of Timber Grading sawn timber Durability of timber Specifying and handling timber Application of.
Timber Defects. Knots A hard cross grain mass of wood that is formed in the trunk of a tree where a branch grows. Knots spoil the appearance and reduce.
Conversion of Timber.
Class Day Thirteen. Chapter 9 Stone & Concrete Masonry.
timber Carpentry General Advantages of Timber Use of Timber.
Lumber Section II. Lumber Structural Strength Depends on species and grade, and the direction in which the load is acting with respect to grain of the.
COLUMNS.
March 13, 2007 DRILL Architecture Styles and Vocabulary QUIZ tomorrow
 Hardwood (Deciduous) - Reproduce by encased nuts and seeds  Softwood (Coniferous) - First trees - Reproduce by seed on their cone  Misleading?
Chapter 2 Lumber.
Timber Seasoning.
MATERIALS & CONSTRUCTION TECHNOLOGY MATERIALS & CONSTRUCTION TECHNOLOGY PALESTINE UNIVERSITY Second semester Dr. Ali I. Tayeh.
WOOD Andrea Arenas Gaile Butvialte Samanta Azpurua.
Wood Members: Báez, Nathaly Troconis, Reynaldo
Source Natural Origin Europe, Scandinavia Properties and features: Easy to work, relatively cheap, readily available. May contain knots, which weaken.
ENGINEERING MATERIAL CHAPTER NO.5 TIMBER
Overview of Design Methods Allowable Stress Design or Working Stress Method Factor of Safety= Allowable Stress Actual Stress.
1 Building Types. 2 Building Use and Size Buildings are available in many types and sizes. Large, specialized buildings should be planned and built by.
Selecting Wood and Lumber Mr. Rodriguez Ag Mechanics.
Chapter 9 Wood.
Lumber Wood. Tree Growth  1.Dead Bark – Protective Layer  2.Living Bark – Composed of hollow longitudinal cells that conduct nutrients down the truck.
Residential Construction Mr. Todzia
Alpha breathing. EVOCATION Ceramic tiles ceramic tile is tile made of clay.
 There is an enormous selection of different timbers available. This range can be split into two groups:  Softwoods  Hardwoods.
Sirodgze2010.  HARDWOOD – ‘deciduous’ broad leaves ex: narra, yakal, kamagong oak, walnut, maple, etc. SOFTWOOD – ‘coniferous’ needle-like leaves ex:
Wood.
WOOD SCIENCE.
Learning Intentions To identify different types of wood and their properties.
Woods and Processes Theory. Knowledge and Understanding.
Wood Technology.
Pitched Roof By PATEL ANKITKUMAR H.
Batch = G-14 1) Patel Raj H ) Avinash ) Vishalnath ) Viren
Wood is a hard, compact, fibrous, material It is made up of the material that carries food and nutrients in the tree. Xylem carries material up from the.
Softwood Year 8 RM Wood There are 3 types of wood Name of wood
BRICKS.
UNIT-II - TIMBER.
Timber Conversion J.Byrne 2012.
Materials & Components
Timber.
The use of the wood in the architecture
Roofs: Types of roofs, Trussed roofs, Steel roof truss
Engineering construction Prof. Syed Ali Hussnain 1.
NFPA 600, INDUSTRIAL FIRE BRIGADE Module : 11 BUILDING CONSTRUCTION.
Wood and wood products.
Wood and wood products 11/9/2018 Building Materials Sofia Sebastian.
Building Construction I Sofia Sebastian 1
Building Construction I Sofia Sebastian 1
Building Construction I Sofia Sebastian 1
Wood.
Timber Defects.
Defects in timber Defects are blemishes in timber that reduce the quality and utility value of timber.
Timber Seasoning.
Tree Conversion.
ROOFS.
KEY WORDS Timber Hardwood Softwood Deciduous Evergreen
WOOD SUPPLY Seasoning wood
INTERACTING ICT ACROSS THE CURRICULUM TASK 2: POWERPOINT PRESENTATION NAME: Navitalai Logaivau ID#
Presentation transcript:

PALESTINE UNIVERSITY BUILDING MATERIAL Chapter No. 4 Timber

Carpentry General Timber has been in very common use for- engineering purposes since ancient times. Even to-day there are certain works, where timber is considered as the most ideal material. To-day although materials like steel, cement, stone bricks etc. have occupied lot of field, where timber was predominantly used, still timber continues to be an important structural material. There is difference between terms timber and wood. Wood includes all types of wood which may be burning wood, structural wood, furniture wood etc. But wood suitable for use as a structural material is called timber.

Carpentry General Timber is obtained from trees. Timber denotes structural wood. A standing living tree is known as standing timber. Rough timber. When tree has been cut and its stem and branches are roughly converted into pieces of suitable lengths. Converted timber When roughly converted timber is further sawn and converted into commercial size the planks, logs, battens, posts, beams, etc

Carpentry Advantages of Timber It is easily available every where. Its salvage value is high. It can be easily transported by converting large pieces into smaller pieces. Working on timber is easy. Timber constructions can be easily repaired. Additions and alterations to timber structures can be easily done. It can be easily jointed. In marine works, timber is considered as an ideal material as it does not corrode. Cement and iron structures corrode in sea water, if they are not protected with special preservative.

Carpentry Advantages of Timber Being light in weight, it is preferred for building works in earth quake prone regions. It is an excellent material for decorative and general use furniture. Lot of other internal decorations can be carried out with it. It can with stand, shocks better than iron and concrete. It is good insulator of electricity and heat. It is good sound absorbing material. Timber can be easily strengthened by attaching steel or other material with it.

Carpentry Use of Timber It can be said that there is no Engineering field, where timber is not used one way or the other. Uses of timber are numerous. Some of its important uses are given as follows: It is very much used for railway track sleepers. It can be used inform of piles, vertical posts, beams, lintels, doors and windows. It can also be used as members of roofing trusses. It is an important material for furniture-making It is used for floors, ceiling, and partition walls.

Carpentry Use of Timber It is used as form-work for cement concrete structures. It is very much used in making sports. goods, musical instruments, well curbs, agricultural implements, etc. Packing cases are mostly made from soft timber. It is very much used for timbering the deep. trenches. Railway coaches and wagons are also made from high class timber.

Carpentry Qualities of Good Timber Following are the qualities of good timber. A good timber should be hard and durable. It should be capable of resisting the actions of fungi, chemicals and physical agencies. The fibers of the timber should be straight and compact. The timber should be free from knots, twists, upsets, burls shakes, flaws etc. Its colour should be dark. It should be obtained preferably from heart wood. Colour should be uniform. It should be properly seasoned. Its freshly cut surface should smell sweet.

Carpentry Qualities of Good Timber Its weight should be heavy. It should be easily workable. It should not clog the teeth of saw and should be capable of being easily planned. Timber should be tough i.e., it should be capable of resisting shocks. It should be able to withstand the weathering affects. It should be strong enough to withstand bending, direct and shear effects efficiently. A clear ringing sound should be emitted by the timber when struck. Heavy dull sound indicates decayed timber. It should offer adequate fire resistance. It should be elastic

Carpentry Defects in Timber The defects that usually occur in the timber may be classified into two categories as follows: Defects that develop during growth of the tree. Defects that develop after felling the tree.

Carpentry Defects in Timber Defects that develop during growth of tree have been briefly discussed as follows: Shakes. This is most serious type of defect in timber. These are sort of cracks which partly or completely separate the fibers of wood. A shake is nothing, but separation of the timber along the grains. Shakes may be of several types.

Carpentry Defects in Timber Star shakes. These are radial cracks or splits that extend from bark towards the sap wood. They usually remain confined up to the plane of sap wood only. The cracks are widest at the circumference and go on narrowing as they proceed towards the Centre of the tree. Star shakes usually develop due to fierce heat and frost When logs having this defect are sawn they usually separate out into a number of pieces and hence become useless.

Carpentry Defects in Timber Heart shakes. These splits or cracks occur in the central part of the trees. There are widest at the centre and go on narrowing as they proceed towards outside. This defect usually occurs in over-matured trees. This defect is usually caused due to shrinkage of the heart wood. Heart shakes divide the tree cross-section into several parts. Straight running heart shake is not as serious as twisted heart shake.

Carpentry Defects in Timber Cup shakes. This defect develops curved slit between successive annual rings. The split does not run for the full circumference of the annual rings. This defect usually develops due to unequal growth. Another possible reason for their development may be contraction of timber under atmospheric changes together with the twisting action of strong winds.

Carpentry Defects in Timber Ring shakes. When cup shake defect runs for full circumference of the annual ring, it is called ring shake. It is more serious than cup shake. Radial shakes. They are similar to star shakes. They are numerous, fine and irregular. They usually occur when felled tree is exposed to sun for seasoning. The cracks run for a short distance from bark to-wards the centre and then follows the course of an annual ring and ultimately goes towards the pith.

Carpentry Defects in Timber Upsets or. This defect is caused due to injury suffered by wood fibers by crushing or compression. Upsets are mainly due to improper felling of tree and exposure of tree in its young age to fast blowing wind. This defect indicates change in direction of wooden fibers. Twisted fibers. They are caused by twisting of young trees constantly in one direction under the action of strong prevalent winds. Timber with twisted fibers is unsuitable for sawing. The timber having this defect is mostly used for posts and poles in an unsawn condition

Carpentry Defects in Timber Upsets or. This defect is caused due to injury suffered by wood fibers by crushing or compression. Upsets are mainly due to improper felling of tree and exposure of tree in its young age to fast blowing wind. This defect indicates change in direction of wooden fibers.

Carpentry Defects in Timber Knots. Knots are generally developed at the bases of branches cut off from the tree. This phenomenon ultimately results in the formation of dark, hard rings, known as knots. As knots break the continuity of the wooden fibers, they form a source of weakness. The amount of weakness caused by the knot depends upon the position, size, and degree of grain distortion around it. Knot is the most commonly encountered defect of wood.

It is impossible to procure timber free of knots. Knots may be dead, live loose, or tight. Tight knots are not objectionable unless they are too large. Their presence on tension members is objectionable . It is very difficult to plane the timber at knots.

Carpentry Defects in Timber Wind cracks. The outer layers of a standing tree suffer from the effect of shrinkage due to atmospheric agencies. This causes cracks on the outer surface only. These cracks are known as wind cracks.

Carpentry Methods of stacking. Before seasoning, the timber should be stacked in yards so as to protect the timber from direct sun. Ends of logs should be protected against splitting by applying anti-Splitting compositions and stacked on foundations in closed stacks in one or more layers.

Carpentry Defects in Timber One and nine method of stacking. This method of stacking timber is most suitable for moderately heavy coniferous sleepers in hot climates and for heavy timbers in moist climates. For reference

Carpentry Defects in Timber Close crib method. This method of stacking timber allows reduced air circulations and thus slows down the pace of seasoning. This method is recommended for stacking heavy structural timbers like sal in hot and dry localities.

Carpentry Defects in Timber Doors Joinery works shall be carefully put together and properly jointed in accordance with best practice; all joints shall be glued and screwed or doweled. Any screws appearing on face work shall have the heads let in and be pelted unless otherwise described. Softwood fixings shall be about steel screws. Hardwood joinery shall be put together and fixed brass cups and screws. Cups for fixing hardwood joinery shall be cast brass cups with milled edges and shall be neatly let in to finish flush with the face of the work.

Paneled doors

Flush doors

Carpentry Defects in Timber Frames Frames to doors, windows and fly screens shall be provided and built in to the sizes Frames shall be securely tied to walls by means of steel or similar metal cramps, galvanized or dipped in bitumen as follows: Door frames: Three cramps to each side.

Window frames: Two or more cramps to each side according to size. Doors, windows, etc shall be carefully and accurately fitted to the frames to give a uniform clearance of not more than 3mm all rounds. Glazed beads where required shall be wrought splayed and rounded and shall be neatly mitered and fixed with small brads or lost-head nails.

Carpentry End