Please register for product warranty at: WARNING: “Please read this manual thoroughly before using VME BioDrive™ A Data Security Mobility Solution OPERATING MANUAL

INTRODUCTION A - Fingerprint sensor B - Fingerprint protective metal C - Cover D - Enrollment Switch E - USB Interface F - Fingerprint Sensor Cover G - RED LED for fingerprint entry & data read/write H - LED for OK/NG fingerprint entry I - Fingerprint Enrollment LED J - For neck strap Security – Data is encrypted and can only be accessed via fingerprint verification. Your fingerprint template cannot be accessed via PC Plug ‘n’ Play – Supports Win98/ME/2000/XP, MAC OS 8.6 and above, and Linux 2.4.x Convenience – Weighs only 27 grams and measures 7.5cm Pg 1

Pg 2 HOW TO ENROLL FOR THE FIRST TIME? Set enrollment switch to NORMAL and insert into USB port. Normal Setting Enrollment LED ON RED LED blinks NG/OK RED LED OK – Successful Enrollment NG – Error (Try Again) 1)Place finger on sensor 2)Repeat enrollment for remaining 4 entries

NORMAL USAGE Normal Setting Pg 3 Place finger onto sensor for verification GREEN LED indicates fingerprint acceptance, RED LED indicates fingerprint rejection

HOW TO RE-ENROLL Remember to slide Enrollment Switch back to “Normal” upon completion. CAUTION Remove VME BioDrive ONLY after all 3 LEDs goes off. Pg 4 1.Set Enrollment Switch to 2)Place finger onto sensor to clear previous fingerprint enrollments. 3)Repeat Steps 1 & 2 in page 2 Enrollment Setting

Daily use: 1. Step 1: Place finger on sensor 2. Step 2: After authentication, slide finger away from sensor to clear finger print 3. Step 3: Close cover Step1: Down Step 2:Slide awayStep 3:Close cover VME BioDrive Care VME BioDrive TM is a product of superior design and quality which should be handled with care. The suggestions below will help you enjoy this product for many years. 1.Clean the fingerprint sensor regularly with clean dry cloth. 2.Always replace the fingerprint cover to protect the fingerprint sensor from unintentional scratches. 3.Run Scandisk regularly to ensure the data integrity of VME BioDrive. 4.Always enroll a total of 5 fingerprints. 5.Keep it out of the reach of small children. Pg 5