Variable section sweep  The Variable section sweep option is used to create a sweep feature in which the section varies according to the trajectory.

Slides:

Advertisements

Similar presentations

Parametric Modeling Parametric Modeling

Advertisements

6. Revolved Protrusions The revolve option creates a feature by revolving the sketched section around a centerline from the sketching plane into the part.

3D Modeling Features and Modeling Strategy Professor Name Course Name.

Ken YoussefiPDM I,SJSU 1 Sweep Command – Sweep along a Guide Guide Section Insert → Sweep → Sweep along Guide Or select Sweep along from the toolbar Sweep.

DRAWING USING SURFACES 115. To start your SURFACES drawing, go to new drawing, choose PART. Once the Part screen appears, click on START, choose MECHANICAL.

Sean Dalton Solid Edge Draft Solid Edge draft is an environment which allows the creation engineering drawings directly.

HELICAL SWEEP BY MARCOS HERNANDEZ ALEJANDRA MARTINEZ NICOLAS SAN PEDRO.

Welcome Mill Lesson 12 – Part-1

Ken YoussefiIntroduction to Engineering – E10 1 Sweep Creates a solid with uniform cross section Profile Path Loft (sweep and blend combined Creates a.

11-1 Space Figures and Cross Sections

PA215: Many variables Integrals over irregular regions Change of order of integration Solid angle Sketching surfaces - Chapter 10, section 3,4,14,15 Multiple.

ME 3861 CAD Review A solid modeling example January 24, 2001.

Digitising. Planning : Analyzing Form Analyze geometric features of a form Decompose a form into different parts Rule surface? Sweep surface? Look for.

Some Material on Swept Solids and Surfaces of Revolution From Chapter 10 of Mortenson Sections 10.5 – 10.6 Geometric Modeling

A PREVIEW OF CALCULUS SECTION 2.1. WHAT IS CALCULUS? The mathematics of change.  Velocities  Accelerations  Tangent lines  Slopes  Areas  Volumes.

Engineering 1182 College of Engineering Engineering Education Innovation Center Revolve Rev: , AJPRevolve1.

AE4131 ABAQUS Lecture Part IV

Wireframe and Surface Design

Outline of class  1 st part: How to make sketches  Entities  Relations  Dimensioning  2 nd part: How to make features  Starting/ending points 

University of Puerto Rico at Mayagüez Department of Mechanical Engineering Introduction to NX 6.0 Tutorial 3 Modified by (2011): Dr. Vijay K. Goyal and.

Mechanical Engineering Dept., SJSU

University of Puerto Rico at Mayagüez Department of Mechanical Engineering Introduction to NX 6.0 Tutorial 1 Modified by (2011): Dr. Vijay K. Goyal and.

Copyright DASSAULT SYSTEMES Wireframe and Surface Design CATIA Training Exercises Version 5 Release 9 June 2002 EDU-CAT-E-WFS-FX-V5R9.

Parametric Modeling. 3D Modeling Steps - Sketch Step 1 Sketch Geometry (use the “line” tool today) You are making a four-sided shape that is not necessarily.

University of Puerto Rico at Mayagüez Department of Mechanical Engineering Introduction to NX 6.0 Tutorial 4 Modified by (2011): Dr. Vijay K. Goyal and.

Lesson 9 2D Sketches Angular dimensions Sketch Dimensions Offset.

FEM Example 3.4. Example 3.4 L(x,z) = Lift pressure D(x) = Drag pressure P = Point Load.

ASSIGNMENT D11 ADVANCED 3D TOOLS. ADVANCED TOOLS Sweep – Moving a cross-section through a path two form a three-dimensional object Needs a Cross-section.

FAFSA Completion Application Webinar Technical Demonstration January 13, 2015.

Chapter 3 Creating and Editing Sketched Features.

TABLES AND VALUES Section 1.5. Open Sentence Equation.

Solid Modeling Features …from the EXPERTS. Reseller Training Objectives Swept and Loft Swept and Loft Helix Helix Multiple Occurrences Multiple Occurrences.

Presented By: Weidong WU, Ph.D. Date: Part I Creating a Revolved Part 1. Start Pro/E wildfire. 2. File  set working directory…  Your directory.

University of Puerto Rico at Mayagüez Department of Mechanical Engineering Introduction to NX 6.0 Tutorial 2 Modified by (2011): Dr. Vijay K. Goyal and.

Ken Youssefi Introduction to Engineering – E10 1 SolidWorks Select File.

Mesh Control Workshop 3. Workshop Supplement Workshop 3 - Meshing Controls August 26, 2005 Inventory # WS3-2 Workshop 3 - Goals Use the various.

Extrusion Revolve ENGR 1182 SolidWorks 02.

Chapter 3 Creating and Editing Sketched Features

Selecting the best sketch profile. To create 3D solids, Solidworks first draws a 2D profile of that solid.

For Higher Graphic Communication

Innovation Intelligence ® Section 10 Additional Meshing Tools.

Learning Objectives • Create sweep features. • Create lofted features.

Workshop 3 Various Workshops for SOLSH190 Solid-Shell Element

Mesh Control Winter Semester PART 1 Meshing.

1.To begin click: File, New, then select Design 2.Next change the view to 2D.

The Revolve Tool The Revolve Tool is used to create 3D shapes that are “swept” around an axis. Below are some examples of shapes created with the Revolve.

Computer – Aided Design Terminology You must have a generic understanding of commands and techniques which are used in a number of packages (YOU CANNOT.

Create an Engineering Drawing Move the frame file (*.FRM) and all the part files (*.PRT) into one folder File -> Set working directory -> select the holder.

SolidWorks Justin Drummond. 1.Draw a shape on a plane and save the sketch (should turn grey). 2. Pick a new plane that is perpendicular to the previous.

Solid Modeling SolidWorks Layout 2D Sketching ENGR 1182 SolidWorks 01.

ARCH 3691 Advanced Design & Building Information Modeling

Steps Sketch the one position in the correct orientation.

Hole (Hole Tools) Create Simple Hole (rectangle)

Constructing base features

Graphics 2: Isometric Sketching From Different View Points

Manufacturing Process - Extrusion

Advanced Features in Pro/E

Constructing base features

Lofting A loft blends multiple profiles with varying shapes on separate planes to create complex shapes.

In this chapter, you will learn the following:

Point (Datum Point Tool)

Part: Helical Sweep Create the solid model of a part by Helical sweep.

1. Top Plane, New Sketch Sketch Circles 2. 50 & 1

Powerpoint Flow Simulation

CLICK TO START.

The Structure of the Earth

CLICK TO START.

BRACKET 1. CHANGE TO METRIC UNITS 2. TOP PLANE SKETCH AS SHOWN

PIN 1. CHANGE TO METRIC UNITS 2. RIGHT PLANE SKETCH AS SHOWN

Call Now : Click : -

Presentation transcript:

Variable section sweep  The Variable section sweep option is used to create a sweep feature in which the section varies according to the trajectory.

To make this object we have to use variable section sweep & we follow all below elements:--

Variable section sweep  In first we make various trajectories on different plane.  Then we use variable section sweep option & we select all trajectory one by one but in first we select centre trajectory.  Now we click on sketch.  In sketch file to take reference of trajectory points we make a cross-section & done.

Variable section sweep  Now we can see preview of this object.  And we also use various condition like :--  solid  Thin trim option  surface (Default)  Finally we accept this feature