An introduction to the program and the tools and general user interface.

Introduction to the method by which one creates objects of desired specifications in Pro/E

I learned to command various ways to round an edge and the tools used to do so.

I learned to create shells and ribs. I also learned to properly, and effectively employ datum planes.

I went back and edited various specifications of previous projects.

I learned three more tools: how to extrude in a circular path (revolves), how to make hole patterns and how to copy those patterns

I used the sweep and blend commands to extrude alone a desired path and to create patterned 3-D objects.

I used the sweep and blend commands to extrude alone a desired path and to create patterned 3-D objects.

I used the sweep and blend commands to extrude alone a desired path and to create patterned 3-D objects.

I used the sweep and blend commands to extrude alone a desired path and to create patterned 3-D objects.

I learned to create AutoCAD-esque drawings in Pro/E.

I learned to assemble parts that I had previously created. Also, I had to create the bearings in the end posts without a tutorial.

I learned to assemble parts that I had previously created. I had to create the bearings in the end posts without a tutorial. I also learned the exploded view commands.

I furthered my expertise in the use of assemblies, constraints, and exploded views.