SimTek Fence

About Us Founded in 2007, SimTek Fence has reinvented fence manufacturing with its patented design of rotationally-molded fencing allowing realistic stone appearance and superior performance. We are one of the fastest growing fence manufacturer in the United States

Patented Construction Every panel and post is manufactured by using rotational mold technology.

Patented Construction Our fence system is made with proprietary Linear Low Density Polyethylene Plastic (LLDPE) and is reinforced with galvanized steel. 17 High Strength gauge 1 ½” squared galvanized steel tube

Superior Wind Load Rating SimTek Fence has been engineered to meet and exceed the wind load requirements for Miami-Dade County for hurricane force wind loads mph sustained wind loads with a maximum burst of 130 mph.

SimTek Fence Excellent Sound Barrier SimTek fence blocks 98% of direct sound Our Sound Transmission Class Rating is (STC) is 26

Fade Resistant SimTek fence contains UV-12 inhibitors that allows the plastic to maintain its original granite color. The fence will not fade or ever change colors.

our new √ green (formula) Greener Solution SimTek Fence uses more than 200,000 lbs. of recycled polyethylene plastic. No trees are cut down for the purpose of manufacturing our fence. We recycle, regrind, and reuse all our polyethylene – we produce no waste or plastic scrap. Were possible, we use recycled packaging materials Our fence is 100% recyclable. + Rotomolding =

Easy Installation Step 1: Dig holes 10” to 12” in diameter and about 30” to 36” deep in the ground. Step 2: Attach the support bracket in the groove of the post at 73 ½”.

Easy Installation Step 3: Set post in concrete and use metal stiffener to space from post-to-post. Step 4: Make sure that post is plumb and evenly spaced. Metal Stiffener

Easy Installation Step 5: Once the concrete cures, panels can be installed by sliding them in the channel of the post.

Cutting Panels Step 6: Panels can be cut to any desired length. a.Remove steel stiffeners from panel. Determine the exact width between post grooves. Mark and cut stiffeners with a metal blade. b.Cut the panel to the stiffener width minus ½” to allow for thermal expansion and contraction.

Easy Installation Step 7: Install caps over the post. Caps are pressure fitted. Recommendation: Panels are universal with no front or back and no top or bottom edge. Randomly installing panels gives the most pleasing aesthetic effect.

Stair Stepping Panels

Concrete Surface Mounts SimTek can be installed on top of a 8” minimum width poured concrete wall or on a flat surface by using our mounting brackets.

EcoStone Colors Eco Dark Brown Eco Brown Eco Beige Eco Grey

Pro-Line Colors Brown Beige Grey Black Desert White

6’ High Residential Projects

3’ High with Ornamental Residential Projects

Great Around Swimming Pools Residential Projects

Home Owner’s Associations (HOA) HOA Projects

6’ High Commercial Projects

8’ High Commercial/Industrial Projects