1 © 2011 Profile Recorder for ProtoFlow S Installation Instruction

2 © 2011 Profile recorder – Installation Switch the oven ON Open the drawer (select function „OPEN/CLOSE“ in „SETTING“ menu) Switch the oven OFF, leaving the drawer opened Unplug a power cord from the mains! Disconnect the system from the mains during all maintenance work on the system.

3 © 2011 Profile recorder – Installation Position of the “blank” cover or the “Profile recorder” connection box: The “blank” cover which covers the profile recorder installation or the “Profile recorder” connection box is mounted in a front part of the drawer Exchanging or removing the “blank” cover : Unscrew all three screws from the bottom side of the drawer Use Allen key no.:2.5

4 © 2011 Profile recorder – Installation Remove the screws: Remove all three screws completely Gently lift up the “blank” cover Lifting up: Lift up the cover or the box Remove cable from a clip Pull out a rubber grommet Be careful to not scratch the glass.

5 © 2011 Profile recorder – Installation Inserting the “profile recorder” connection box Take a “profile recorder” connection box and put it into drawer with the electronic side up. Electrical connections: Plug in the connector

6 © 2011 Profile recorder – Installation Fixing the cable Fix the cable with pushing the rubber grommet into the slot Fix the connection box Flip the connection box and place it in its place Fix the connection box with screws from the bottom side of the drawer

7 © 2011 Profile recorder – Installation The installation procedure is finished. To check: Plug the power cord into mains Press the power switch to turn ON the oven After turn ON the oven, it recognize the profile recorder automatically. Choose the number of sensors to be displayed on the LCD: o SETTINGS  LCD VIEW  LCD 5CH LCD 7CH

8 © 2011 Thank you for your attention! LPKF Laser & Elektronika d.o.o. · Polica 33 · 4202 Naklo · ,