Structures 1 Technology This presentation will explore: components of structures strengthening structures principle of moments types of levers Structures ClassAct SRS enabled.

Structures 1 Technology Frame Structures Examples of structures include cranes, bridges, furniture, buildings and various forms of transport such as automobiles, airplanes, ships and trains. A crane is an example of a frame structure. Each part can be easily seen and examined. An automobile has a shell structure, which is more difficult to analyze as the frame is hidden. We will confine ourselves to frame structures in this presentation. Next >

Structures 1 Technology Purposes of Structures Structures must be able to carry loads for which they were designed. Structures must not collapse in use. Structures must hold all the various parts in their correct relative position. This is particularly important for structures that hold mechanisms in place. Next >

Structures 1 Technology 1 A) A wooden table B) A hot-air balloon C) A crane D) A suspension bridge Which of the following do you think is NOT a frame structure? Question

Structures 1 Technology 2 Structures must hold all parts in their correct relative positions. Is this true or false? Answer True or False. Question

Structures 1 Technology Joints and Members Frames consist of joints and members: Joints can also be reinforced with gusset plates to improve the strength of the joint. Members may be glued, welded, riveted, bolted or screwed together. Each method has its advantages and disadvantages. Different types of joints will be used depending on how the structure is to behave and how the loads are to be applied. Next >

Structures 1 Technology Triangulation If four members are loosely pinned together, the structure is unstable. If a force is applied, it will move easily. Adding one more member makes it stable by creating two triangles. An example of an unstable frame: Making the frame stable: Next >

Structures 1 Technology 3 Consider this shape. What is the minimum number of members that must be added to make it stable? Enter your answer and press Send. Question

Structures 1 Technology Tension and Compression Forces in structures are usually either tension or compression forces. Tension Compression Next >

Structures 1 Technology Struts and Ties If a member is under tension, it is called a tie. If a member is under compression, it is called a strut. Next >

Structures 1 Technology 4 A) Strut B) Tie Is the member shown in the horizontal position a strut or a tie? Question

Structures 1 Technology Pivots, Levers and Moments - The Tower Crane The crane looks unstable. It looks as if it should fall down. There seems to be too much of the boom on the right-hand side. In order to understand this better we need to know about pivots, levers, moments and equilibrium. The boom is therefore balanced. It doesn’t fall because of a counterbalance weight on the left-hand side. BoomCounterbalance Next >

Structures 1 Technology Equilibrium The pivot point (or fulcrum) is the point at which something rotates. The weights on the scales are at equal distances from the pivot. If something is balanced, it is said to be in equilibrium. The man on the wire has two equal weights at equal distances from the pivot point. If one of the people on the seesaw moves backward or forward, the balance will tip one way or the other. The seesaw is no longer in equilibrium. Next >

Structures 1 Technology 5 The center of the wheel on a wheelbarrow is its pivot point. Is this true or false? Answer True or False. Question

Structures 1 Technology Moments When something is in equilibrium, the moments of a force are balanced. The moment of a force is the force multiplied by the distance from the pivot (moment = F x d). Next >

Structures 1 Technology 6 A) Force x extension B) Force x distance C) Force / distance D) Force + distance Which expression correctly calculates the moment of a force? Question

Structures 1 Technology Principle of Moments The principle of moments says that for there to be equilibrium, the clockwise moment must equal the counterclockwise moment. Clockwise moment = F 2 x d 2 Counterclockwise moment = F 1 x d 1 If F 2 x d 2 = F 1 x d 1 there is equilibrium Next >

Structures 1 Technology 7 A) 1 cm B) 5 cm C) 10 cm D) 20 cm If a 10N force is arranged 10 cm from a pivot point of a seesaw, what distance would a 20N force need to be from the pivot point in order to balance the seesaw? Question

Structures 1 Technology Types of Lever There are three types of levers: Examples include: Wheelbarrow microswitch brake pedal Examples include: Shovel forearm muscles fishing rod Examples include: seesaw crowbar scissors Next >

Structures 1 Technology 8 A) Class 1 B) Class 2 C) Class 3 Which class of lever is a pair of tweezers? Question

Structures 1 Technology 9 A) They are all class 1 levers B) They are all class 2 levers C) They are all class 3 levers D) They are all double levers What do scissors, tweezers, nut crackers and tongs all have in common? Question

Structures 1 Technology Plane (2D) Structures Three members, AB, BC and AC support a traffic light: AB and AC are of equal length Which members are in compression? Which members are in tension? At which point is the load applied? Where is the pivot point or fulcrum? Is this in equilibrium? Next >

Structures 1 Technology 10 A) Strut B) Tie In the example you have just seen, is the member holding the traffic light to its support a strut or a tie? Question

Structures 1 Technology Summary structures exist to provide support for loads or mechanisms In this presentation we have seen that: The most common forces acting on structures are: tension (in ties) compression (in struts) structures can be strengthened by triangulation there are three type or class of lever End >