Dot – id root server Specification and Criteria For members of root server © NICE (National Internet Cadet Empowering)

Introduction It's nice to be life in peace It's nice to be harmony It's nice to be unity It's nice to be co-operation It's nice to be open It’s nice to be connected It's nice to be NICE

What's AnyCast ● Basic for network distribution ● Distribute the server to different Geographic's location ● Simple, it’s only the way of network configuration ●

Sample of Dot id Any Cast Configuration DNS lookup for produces a single answer: IN A Routing Table from Router 1: DestinationMaskNext-HopDistance / / / Server Instance A Server Instance BRouter Router 3 Router Router 1Client

Sample of Dot id Any Cast Configuration Router 1ClientServer Router 3 Router 2 Router Routing Table from Router 1: DestinationMaskNext-HopDistance / / / What the routers think the topology looks like:

How to Become members of Dot id Root Server ● Provide the server for Dot id – Minimum Pentium MHz – Memory Minimum 256 M Byte – Hard disk Minimum 20 G Byte – Fast Ethernet Port Minimum 2 unit ● Power source with UPS back-up minimum 6 hours or 20 minutes if using Generator Set ● Bandwidth guarantee minimum __ Kbps, 2 different uplink is preferred ● Room temperature maximum 24 degree Celsius ● Humidity 30% to 50% ● Had AS Number ● Router CPU process less than 90%

Configuration Diagram

Address and ASN ● IPV4 Assignment ● Lo IPV4 assignment ● AS number: XXXX