ACL800 Series The Alliance of Design and Security Mini Surface and Flush mount range ACL800 Series The Alliance of Design and Security

The readers: Surface mount (2 colours) 3D rotation view Mounting steps

The readers: Flush mount (3 colours) Create your own combination of front plates and electronics: 3 (Dark Gray/Silver/White) different front plates for 5 different electronics

The readers: Flush mount TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple. 3D mounting ACL870W ACL800-RDREM Controller Possibility to connect a master reader to a slave reader to get a double technology

A new access control range TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple (flush mount range) COLOURS: Available in different colours to match surroundings and different types of building HOUSINGS OR FRONT PLATES: same housing and front plate for the three technologies (Mifare, Proximity & Stand-Alone Relay) LARGE RECTANGULAR LED: A key defining feature of the range is the multi-colour rectangular status LED. The proximity reader’s change colour depending on whether the user’s key fob is accepted (green) or denied (red). The exit switch within the range is touch sensitive and also has the multi-colour notification - whether the door is closed (red) or open (green) The new products with large rectangular status LEDs are designed to overcome the difficulty people may have in locating exit buttons when leaving a building

Reader Compatibility & Technology Versions available 13,56 Mhz Mifare readers Mifare Classic CSN 4byte & 7 byte Mifare DESFire EV1 CSN 7 byte Mifare Lite CSN 7 byte 125 Khz Proximity readers CASI Rusco Proximity (EM) as used on TruPortal Versions with interface Wiegand interface Stand-alone Relay interface Configuration of different formats 26 Bit / 34 Bit / 58 Bit: selectable either via Config Card or Switches depending on model LED control: selectable via Config Card or Switches depending on selected model

Standalone Keypads: ACL870 & ACL870DIN ACL870-SILV colour ref.: Silver Features ACL870W ACL870DIN Mounting: Surface Electrical flush back box Housing: Moulded Aluminium ABS Colour: Silver and Gray Keys: Backlit Metallic Resin potted electronic: Yes (with 1m cable) No Outputs: 1 Relay (2A) & 1 Transistor (250mA) 2 Relays (3A/24V DC, 230V AC) Master code (programming): 1 User codes: 99 Relay time: Latching or timed from 1 to 99 seconds Push to exit button input: Memory: EEPROM (Keep programming safe even in case of power-cut) Green LED: Output 1 status Red LED: Output 2 status Orange LED: Programming status and Key Press Keypad blocking: For 30 seconds with beep noise after 8 consecutive incorrect codes Buzzer: Anti-tamper: When open or dismantled Consumption: 30mA in Stand-by. Max. 100mA Max. 120mA Power: Automatic power seclect 12-24V DC; 15-24V AC IP rating: 65 40 Dimensions (mm): 92x51x25 80x80x9 ACL870-GRAY colour ref.: Gray ACL870DIN + ACL800DIN-SILV colour ref.: Silver ACL870DIN + ACL800DIN-GRAY colour ref.: Gray

Network Keypads: ACL870W & ACL870DINW ACL870W-SILV colour ref.: Silver Features ACL870W ACL870DINW Mounting: Surface Electrical flush back box Housing: Moulded Aluminium ABS Colour: Silver and Gray Keys: Backlit Metallic Resin potted electronic: Yes (with 1m cable) No Communication Protocols: Compatible with Wiegand 26, 30, 34, 40, 42, 58 bit, Clock & Data or 8bit per key Green LED: Externally controlled Red LED: Orange LED: Programming status Buzzer: 1 Anti-tamper protection: When open or dismantled Consumption: 70mA Power: 9-14V DC Illumination: Blue backlight (programmable on/off control) IP Rating: 65 40 Operating Temperature. -20ºC to +50ºC Dimensions (mm): 92x51x25 80x80x9 ACL870W-GRAY colour ref.: Gray ACL870DINW + ACL800DIN-SILV colour ref.: Silver ACL870DINW + ACL800DIN-GRAY colour ref.: Gray

Network 125 Khz EM Proximity Readers: ACL800-RDREM & ACL800DIN-RDREM ACL800-RDREM-GRAY colour ref.: Gray Features ACL800-RDREM ACL800DIN-RDREM Mounting: Surface Electrical flush back box Housing: Moulded Aluminium ABS Colour: Silver and Gray Resin potted electronic: Yes (with 1m cable) No Communication Protocols: Wiegand 26, 34, 42 bits (jumper selection) Proximity reading type: Casi Rusco Reading distance: 2 to 5cm Max. 8cm Green LED: Potential Free Red LED: Orange LED: Idle mode Buzzer: 1 Anti-tamper protection: When open or dismantled Consumption: 20mA in stand-by, Max 35mA Max. 45mA Power: 9-14V DC IP Rating: 65 40 Operating Temperature. -20ºC to +50ºC Dimensions (mm): 92x51x25 80x80x9 ACL800-RDREM-SILV colour ref.: Silver ACL800DIN-RDREM + ACL800DIN-SILV colour ref.: Silver ACL800DIN-RDREM + ACL800DIN-GRAY colour ref.: Gray

Network 13,56 Mhz Mifare Proximity Readers: ACL800-RDRMF & ACL800DIN-RDRMF Features ACL800-RDRMF ACL800DIN-RDRMF Mounting: Surface Electrical flush back box Housing: Moulded Aluminium ABS Colour: Silver and Gray Resin potted electronic: Yes (with 1m cable) No Communication Protocols: Wiegand 26, 34, 58 bits (programmable by card) Proximity reading type: Mifare Clasic, Mifare Ultralight, Mifare Desfire (13,56MHz) Reading distance: 1 to 3cm Max. 6cm Green LED: Potential Free Red LED: Orange LED: Idle Mode Buzzer: 1 Anti-tamper protection: When open or dismantled Consumption: Max 110mA Max. 150mA Power: 9-14V DC IP Rating: 65 40 Operating Temperature. -20ºC to +50ºC Dimensions (mm): 92x51x25 80x80x9 ACL800-RDRMF-GRAY colour ref.: Gray ACL800-RDRMF-SILV colour ref.: Silver ACL800DIN-RDRMF + ACL800DIN-SILV colour ref.: Silver ACL800DIN-RDRMF + ACL800DIN-GRAY colour ref.: Gray

Sensitive Push Button: ACL800-PB & ACL800DIN-PB ACL800-PB-SILV colour ref.: Silver Features ACL800-PB ACL800DIN-PB Mounting: Surface Electrical flush back box Housing: Moulded Aluminium ABS Colour: Silver and Gray Technology: Touch sensitive Backlighting: Green (Door opened) – Red (Door Closed) Exit: Relay 1A (NO/C/NC) Relay output: On/off or Timed (3, 5 or 10 seconds) Visual and Sound Signals: Complete button lighting + buzzer Wiring: 1m cable Terminal block Consumption: Min. 45mA, Max 80mA Max. 65mA Power: 12-24VDC; 15-24VAC IP Rating: 65 40 Operating Temperature. -20ºC to +50ºC Dimensions (mm): 92x51x25 80x80x9 ACL800-PB-GRAY colour ref.: Gray ACL800DIN-PB + ACL800DIN-GRAY colour ref.: Gray ACL800DIN-PB + ACL800DIN-SILV colour ref.: Silver

Partnumbers – Flush Mount Type Interface Mounting Description ACL800DIN-RDREM Rdr 125 Khz Wiegand Flush Mount EM Flush mount Reader - Wiegand ACL800DIN-RDRMF Rdr 13,56 Mhz Mifare Flush mount Reader - Wiegand ACL800DIN-PB Push Button Capacitive Flush Mount Push Button ACL870DIN Keypad Relay Standalone Flush Mount Keypad ACL870DINW Wiegand Flush Mount Keypad ACL800DIN-GRAY Colour Frame Dark Gray Single Frame ACL800DIN-SILV Silver (Light Gray) Single Frame ACL800DIN-WHT White Single Frame

Partnumbers – Surface Mount Type Interface Mounting Description ACL800-PB-GRAY Push Button Surface Mount Gray Surface Mount PB ACL800-PB-SILV Silver Surface Mount PB ACL870-SILV Keypad Relay Silver Surface Mount Standalone Keypad ACL870-GRAY Dark Gray Surface Mount Standalone Keypad ACL870W-SILV Wiegand Silver Wiegand Surface Mount Keypad ACL870W-GRAY Dark Gray Wiegand Surface Mount Keypad ACL800-RDREM-SILV Rdr 125 Khz Silver EM Surface mount Reader ACL800-RDREM-GRAY Dark Gray EM Surface mount Reader ACL800-RDRMF-SILV Rdr 13,56 Mhz Silver Mifare Surface mount Reader ACL800-RDRMF-GRAY Dark Gray Mifare Surface mount Reader

Configuration cards & Usage Configuration cards can be used to toggle between the reader modes Two separate cards are made available Configuration card1: Wiegand Output, by default it is 26 bits Switch ON the Reader and the reader will blink in orange, indicating that is waiting for the programming cards (Wiegand or Backlight Card) 2. In the next 60 seconds, present the Wiegand card. 1 beep + 1 blink indicates that the reader is programmed in Wiegand 26 bit. 3. Present the Wiegand Card again and 2 beeps + 2 blinks indicates that the reader is programmed in Wiegand 34bit. 4. Present the Wiegand Card again and 3 beeps + 3 blinks indicates that the reader is programmed in Wiegand 58bit. Configuration card2: LED control

Programming of Relay Output Version