MCS-TOUCHSCREENS

MCS-TOUCH-7 FRONT BACK  NEW FOR 2015  High Resolution (1280 x 800)  LCD Display with LED Backlighting

MCS-TOUCH-15.4 FRONT BACK  ON-SCREEN KEYPAD  MCS-CONNECT and MCS-GRAPHICS provides both graphics and service mode

 The MCS-TOUCH-7 and TOUCH-15.4 are new touchscreen interfaces designed to simplify user access with the MCS-Magnum and MCS-MicroMag utilizing MCS-Connect to provide both graphics and service mode access to technicians.  Information and graphics on the MCS-TOUCH-7 and MCS-TOUCH-15.4 are shown on a high resolution (1280x800) LCD display with LED backlighting, which will guarantee long-life operation.

 The MCS-TOUCH-7 and 15.4 are suitable for installation for both indoor and outdoor applications. Utilizing a gasket for an environment seal provides the unit with a NEMA 4 rating.

MCS-TOUCHSCREEN MOTHERBOARD - FRONT MICRO SD Slot 1 USB Port On-the-Go 2 - USB Ports 2.0 Ethernet Port 3 - RS 485 Communication Ports +12 V DC Power Input 1 GB DDR3 Memory RTC Battery 5 wire connection 15.4 Touchscreen Serial Console Port MCS-TOUCHSCREEN MOTHERBOARD - BACK 4 GB EMMC Flash Memory 7in LCD connector mPCIe Expansion slot 15.4IN LCD Connector 800 MHZ i.MX6 ARM Micro 4 wire connection 7in Touchscreen

INCLUDED COMPONENTS 12 VDC - 50W Single Output Power Supply for Touchscreen Resistant to short circuiting, overloading and over voltage Operating temperature up to 70 0 C Ethernet Crossover Cable 5ft CAT 5e Crossover Patch Cord Orange

DESKTOP WITH COMPANY GRAPHIC

SETTING UP THE NETWORK Click the key shown and the network manager will appear as shown in this screen shot Click Options to set Static & Dynamic IP address

Editing Wired Connection – Static Address Click IP4 Settings to change Network Settings

Static IP, Netmask & Gateway Address Enter Static IP, Netmask & Gateway Address Set to Manual for Static IP or Auto DHCP for Dynamic Click to save Click Add to add a Static IP

MCS-CONNECT SCREEN Click to display the MCS-CONNECT main screen Click Setup to move to the MCS-CONNECT setup screen

MCS-PC CONNECT Setup Screen Local COM Port Choose 1 to 4 Click to save COM PORTS: RS485 1 = 1 RS485 2 = 2 RS485 3 = 3 USB-RS485 = 4

OPENING THE ON-SCREEN TOUCH KEYBOARD Click this key to see on-screen Keyboard

DIRECTORY FOR MCS FOLDERS Click this key to see MCS Folders Autostart boot config file runs in background to start MCS-CONNECT

BOOT CONFIG FILE STARTING MCS CONNECT File shows MCS-TOUCHSCREEN Boot Config file starting MCS-CONNECT

GETTING TO THE MICRO CONTROL WEBSITE SOFTWARE PAGE Click this key to go to the MCS website for software updates

 The MCS-TOUCH-7 and 15 makes it easy for the user to manage more complex installation diagrams, without losing the overall view of the installation, as well as ensuring that the pages can be browsed in a fast and straightforward manner.  Photos below and on the next page are actual screen shots using MCS-CONNECT and MCS-GRAPHICS.

MCS GRAPHICS

 The MCS-TOUCH-7 and 15.4 can connect to up to 60 MCS Controllers at once and supports RS485 or Ethernet networking.

MCS-TOUCH – CONNECTION RS-485 TO ONE MCS-MAGNUM

MCS-TOUCH – CONNECTION ETHERNET TO ONE MCS-MAGNUM

MCS-TOUCH – CONNECTION ETHERNET TO MULTIPLE MCS-MAGNUMS

For additional information please visit our website Or call MCS at