Weather …How to Connect and Use Weather with APIC…
The First step is to pair the WxWorx box with your computer Note: To view instructions on how to connect a Bluetooth WxWorx receiver, see the “” PowerPoint presentation Note: To view instructions on how to connect a Bluetooth WxWorx receiver, see the “Bluetooth Set Up” PowerPoint presentation
Place the Weather Worx receiver antenna in a location where it has a clear view of the sky … then wait for the Weather Worx receiver to acquire satellites, and begin to receive weather data. This information is shown in the XMLink Box…
In APIC under the Settings Menu, click on the Weather Menu
Select items to display on the moving map Click here to view the XmLink
This is the XmLink box. This shows which information is being receiving from Xm Weather
Under the Tools Menu, select the Communication Settings button
Here set the correct Com Port the Bluetooth manager assigned your device Note: The correct Baud Rate for WxWorx is 38400
Radar information Satellite information Metar information After selecting the different weather components, they appear overlaid on the moving map
You can also display Winds Aloft at different elevations.
For any other questions regarding APIC see or contact Approach at