Chapter 8: Local Area Networks: Internetworking

2 Objectives List the reasons for interconnecting multiple local area network segments and interconnecting local area networks and wide area networks Identify the functions and purposes of the various interconnection devices that have been used over time Define a hub and describe the situations in which a hub is used Describe how a transparent bridge learns

3 Objectives (continued) Describe what a switch is and how it differs from other devices Describe the types of situations in which using a switch is advantageous Describe what a router is and how it differs from other devices Describe the types of situations in which a router is used

4 Introduction Sometimes necessary to connect local area network to another LAN or to wide area network Local area network to local area network connections often performed with bridge-like device Local area network to wide area network connections usually performed with router Switch - can be used to interconnect segments of a local area network

5 Why Segment or Internetwork Local Area Networks? To separate / connect one corporate division with another To connect two LANs with different protocols To connect a LAN to the Internet To break a LAN into segments to relieve traffic congestion To provide a security wall between two different types of users

6 Hubs Hub - interconnects two or more workstations into a local area network When workstation transmits to a hub Hub immediately resends data frame out to all connecting links Hub can be managed or unmanaged Managed hub possesses enough processing power that it can be managed from a remote location

7 Bridges A bridge (or bridge-like device) Can be used to connect two similar LANs, such as two CSMA/CD LANs Can also be used to connect two closely similar LANs, such as a CSMA/CD LAN and a token ring LAN Examines destination address in a frame Either forwards this frame onto next LAN or does not Examines source address in frame Places this address in a routing table to be used for future routing decisions

8 Bridges (continued)

9 Transparent Bridge Does not need programming Observes all traffic  builds routing tables This observation is called backward learning Each bridge has two connections (ports) Routing table associated with each port

10 Transparent Bridge (continued) Bridge Observes each frame that arrives at port Extracts the source address from the frame Places that address in the port’s routing table Transparent bridge is found with CSMA/CD LANs

11 Transparent Bridge (continued)

12 Transparent Bridge (continued)

13 Transparent Bridge (continued) Transparent bridge can also convert one frame format to another Note that some people / manufacturers call this kind of bridge a gateway or router Bridge Removes headers and trailers from one frame format Inserts (encapsulates) headers and trailers for second frame format

14 Remote Bridge Capable of passing data frame from one local area network to another when Two LANs are separated by long distance There is a wide area network connecting the two LANs Remote bridge takes the frame before it leaves the first LAN Encapsulates the WAN headers and trailers When packet arrives at destination remote bridge  that bridge removes the WAN headers and trailers leaving original frame

15 Remote Bridge (continued)

16 Switches Combination of hub and bridge Can interconnect two or more workstations Like bridge, it observes traffic flow and learns When a frame arrives at a switch, the switch Examines destination address Forwards frame out the one necessary connection Workstations that connect to Hub  on shared segment Switch  on switched segment

17 Switches (continued)

18 Switches (continued) Backplane of a switch is fast enough to support multiple data transfers at one time A switch that employs cut-through architecture is passing on the frame before the entire frame has arrived at the switch

19 Switches (continued) Multiple workstations connected to a switch use dedicated segments Very efficient way to isolate heavy users from the network A switch can allow simultaneous access to multiple servers, or multiple simultaneous connections to a single server

20 Switches (continued)

21 Isolating Traffic Patterns and Providing Multiple Access

22 Isolating Traffic Patterns and Providing Multiple Access (continued)

23 Isolating Traffic Patterns and Providing Multiple Access (continued)

24 Isolating Traffic Patterns and Providing Multiple Access (continued)

25 Full-Duplex Switches Allows for simultaneous transmission and reception of data to and from a workstation This full duplex connection helps eliminate collisions To support a full duplex connection to a switch, at least two pairs of wires are necessary One for the receive operation One for the transmit operation Most people install four pairs today, so wiring is not problem

26 Full-Duplex Switches (continued)

27 Network Servers Network servers provide necessary storage for LAN software Usually focal point for network operating system Increasingly, network servers are functioning as bridges, switches, and routers By adding appropriate card, a server can assume multiple functions

28 Routers Router - device that connects a LAN to a WAN or a WAN to a WAN Router: 1.Accepts outgoing packet 2.Removes any LAN headers and trailers 3.Encapsulates necessary WAN headers and trailers Because router has to make wide area network routing decisions  router has to dig down into the network layer of the packet to retrieve network destination address

29 Routers (continued) Routers are often called “layer 3 devices” Operate at the third layer, or OSI network layer, of the packet Often incorporate firewall functions

30 Routers (continued)

31 LAN Internetworking in Action: A Small Office Revisited Recall In Action example from Chapter Seven A small office with 20 workstations in one room and 15 workstations in another room were connected to a server via 100BaseTX One hub was kept in a closet near the 20 workstations while a second hub was near the server

32 LAN Internetworking in Action: A Small Office Revisited (continued)

33 LAN Internetworking in Action: A Small Office Revisited (continued) Now Hannah wants to connect the LAN to the Internet She adds a router next to the server and connects it to the hub She connects the router to a high-speed telephone line such as a T-1 service She will also have to program the router to perform IP addressing and firewall functions

34 LAN Internetworking in Action: A Small Office Revisited (continued)

35 LAN Internetworking in Action: A Small Office Revisited (continued) Now network usage is so high that Hannah must consider segmenting the network She decides to install a database server near the original server and replace both hubs with switches

36 LAN Internetworking in Action: A Small Office Revisited (continued)

37 Summary Interconnecting multiple LAN segments as well as LANs and WANs Interconnection devices Hubs Transparent bridges Switches Routers