Chapter 7 Local Area Networks: The Basics Data Communications and Computer Networks: A Business User’s Approach Chapter 7 Local Area Networks: The Basics

Lesson Objectives Data Communications and Computer Networks Chapter 7 Lesson Objectives State the definition of a local area network List the functions and application areas of a local area network Cite the advantages and disadvantages of local area network topologies Identify the physical and logical local area network topologies Specify the different medium access control techniques Describe the common local area network systems, such as Ethernet, token ring and FDDI

Introduction Data Communications and Computer Networks Chapter 7 Introduction A local area network is a communication network that interconnects a variety of data communicating devices within a small geographic area and broadcasts data at high data transfer rates with very low error rates. Since the local area network first appeared in the 1970s, its use has become widespread in commercial and academic environments.

Functions of a Local Area Network Data Communications and Computer Networks Chapter 7 Functions of a Local Area Network File server - A large storage disk drive that acts as a central storage repository. Printer server - Provides the authorization to access a particular printer, accept and queue print jobs, and provides a user access to the print queue to perform administrative duties. Interconnection - A LAN can provide an interconnection to other LANs and to wide area networks.

Functions of a Local Area Network Data Communications and Computer Networks Chapter 7 Functions of a Local Area Network Video transfers - High speed LANs are capable of supporting video image and live video transfers. Manufacturing support - LANs can support manufacturing and industrial environments. Distributed processing - LANs can support network operating systems which perform the operations of distributed processing.

Advantages of Local Area Networks Data Communications and Computer Networks Chapter 7 Advantages of Local Area Networks Ability to share hardware and software resources. Individual workstation might survive network failure. Component and system evolution are possible. Support for heterogeneous forms of hardware and software. Access to other LANs and WANs (Figure 7-1). Private ownership. Secure transfers at high speeds with low error rates.

Data Communications and Computer Networks Chapter 7

Disadvantages of Local Area Networks Data Communications and Computer Networks Chapter 7 Disadvantages of Local Area Networks Equipment and support can be costly. Level of maintenance continues to grow. Private ownership. Some types of hardware may not interoperate. Just because a LAN can support two different kinds of packages does not mean their data can interchange easily. A LAN is only as strong as it weakest link, and there are many links.

Basic Network Topologies Data Communications and Computer Networks Chapter 7 Basic Network Topologies Local area networks are interconnected using one of four basic configurations: 1. Bus/tree 2. Star-wired bus 3. Star-wired ring 4. Wireless

Bus/Tree Topology Data Communications and Computer Networks Chapter 7 Bus/Tree Topology The original topology Workstation has a network interface card (NIC) that attaches to the bus (a coaxial cable) via a tap. Data can be transferred using either baseband digital signals or broadband analog signals.

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Bus/Tree Topology Data Communications and Computer Networks Chapter 7 Bus/Tree Topology Baseband signals are bidirectional and more outward in both directions from the workstation transmitting. Broadband signals are usually uni-directional and transmit in only one direction. Because of this, special wiring considerations are necessary. Buses can be split and joined, creating trees.

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Star-wired Bus Topology Data Communications and Computer Networks Chapter 7 Star-wired Bus Topology Logically operates as a bus, but physically looks like a star. Star design is based on hub. All workstations attach to hub. Unshielded twisted pair usually used to connect workstation to hub. Hub takes incoming signal and immediately broadcasts it out all connected links. Hubs can be interconnected to extend size of network.

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Star-wired Bus Topology Data Communications and Computer Networks Chapter 7 Star-wired Bus Topology Modular connectors and twisted pair make installation and maintenance of star-wired bus better than standard bus. Hubs can be interconnected with twisted pair, coaxial cable, or fiber optic cable. Biggest disadvantage: when one station talks, everyone hears it. This is called a shared network. All devices are sharing the network medium.

Star-wired Ring Topology Data Communications and Computer Networks Chapter 7 Star-wired Ring Topology Logically operates as a ring but logically appears as a star. Star topology is based on MAU (multi-station access unit) which functions similarly to a hub. Where a hub immediately broadcasts all incoming signals onto all connected links, the MAU passes the signal around in a ring fashion. Like hubs, MAUs can be interconnected to increase network size.

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Wireless Topology Data Communications and Computer Networks Chapter 7 Wireless Topology Not really a specific topology since a workstation in a wireless LAN can be anywhere as long as it is within transmitting distance to an access point. Newer IEEE 802.11 standard defines various forms of wireless LAN connections. Speeds up to 20 Mbps possible. Workstations reside within a basic service set, while multiple basic service sets create an extended service set.

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Medium Access Control Protocols Data Communications and Computer Networks Chapter 7 Medium Access Control Protocols How does a workstation get its data onto the LAN medium? A medium access control protocol is the software that allows workstations to “take turns” at transmitting data. Three basic categories: 1. Contention-based protocols 2. Round robin protocols 3. Reservation protocols

Contention-Based Protocols Data Communications and Computer Networks Chapter 7 Contention-Based Protocols First come first served. Most common example is carrier sense multiple access with collision detection (CSMA/CD). If no one is transmitting, a workstation can transmit. If someone else is transmitting, the workstation “backs off” and waits.

Contention-Based Protocols Data Communications and Computer Networks Chapter 7 Contention-Based Protocols If two workstations transmit at the same time, a collision occurs. When the two workstations hear the collision, they stop transmitting immediately. Each workstation backs off a random amount of time and tries again. Hopefully, both workstations do not try again at the exact same time. CSMA/CD is an example of a non-deterministic protocol.

Data Communications and Computer Networks Chapter 7

Round Robin Protocols Data Communications and Computer Networks Chapter 7 Round Robin Protocols Each workstation takes a turn transmitting and the turn is passed around the network from workstation to workstation. Most common example is token ring LAN in which a software token is passed from workstation to workstation. Token ring is an example of a deterministic protocol. Token ring is more complex than CSMA/CD. What happens if token is lost? Duplicated? Hogged? Token ring LANs are losing the battle with CSMA/CD LANs.

Data Communications and Computer Networks Chapter 7

Reservation Protocols Data Communications and Computer Networks Chapter 7 Reservation Protocols Workstation places a reservation with central server. Workstation cannot transmit until reservation comes up. Under light loads, this acts similar to CSMA/CD. Under heavy loads, this acts similar to token ring. Powerful access method but again losing out to CSMA/CD. Most common example of reservation protocol is demand priority protocol.

Medium Access Control Sublayer Data Communications and Computer Networks Chapter 7 Medium Access Control Sublayer To better support local area networks, the data link layer of the OSI model was broken into two sublayers: 1. Logical link control sublayer 2. Medium access control sublayer Medium access control sublayer defines the frame layout and is more closely tied to a specific medium at the physical layer. Thus, when people refer to LANs they often refer to its MAC sublayer name, such as 10BaseT.

Data Communications and Computer Networks Chapter 7

IEEE 802 Frame Formats Data Communications and Computer Networks Chapter 7 IEEE 802 Frame Formats The IEEE 802 suite of protocols defines the frame formats for CSMA/CD (IEEE 802.3) and token ring (IEEE 802.5). Each frame format describes how the data package is formed. Note how the two frames are different. If a CSMA/CD network connects to a token ring network, the frames have to be converted from one to another.

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

Local Area Network Systems Data Communications and Computer Networks Chapter 7 Local Area Network Systems Ethernet or CSMA/CD Most common form of LAN today. Star-wired bus is most common topology, but bus topology also available. Ethernet comes in many forms depending upon medium used and transmission speed and technology.

Data Communications and Computer Networks Chapter 7

Local Area Network Systems Data Communications and Computer Networks Chapter 7 Local Area Network Systems IBM Token Ring Deterministic LAN offered at speeds of 4, 16 and 100 Mbps. Very good throughput under heavy loads. More expensive components than CSMA/CD. Losing ground quickly to CSMA/CD.

Local Area Network Systems Data Communications and Computer Networks Chapter 7 Local Area Network Systems FDDI (Fiber Distributed Data Interface) Based on the token ring design using 100 Mbps fiber connections. Allows for two concentric rings - inner ring can support data travel in opposite direction or work as backup. Token is attached to the outgoing packet, rather than waiting for the outgoing packet to circle the entire ring.

Data Communications and Computer Networks Chapter 7

Local Area Network Systems Data Communications and Computer Networks Chapter 7 Local Area Network Systems 100VG-AnyLAN Deterministic LAN based on demand priority access method. Similar to hub topology (star design). Two levels of priority - normal and high. Supports a wide-variety of media types. Losing ground to CSMA/CD.

Data Communications and Computer Networks Chapter 7

LANs In Action : A Small Office Solution Data Communications and Computer Networks Chapter 7 LANs In Action : A Small Office Solution What type of system will interconnect twenty workstations to a central server, which offers: Electronic mail A database that contains all customer information Internet access High quality printer access

Data Communications and Computer Networks Chapter 7

Data Communications and Computer Networks Chapter 7

LANs In Action: A Home Office Local Area Network Solution Data Communications and Computer Networks Chapter 7 LANs In Action: A Home Office Local Area Network Solution What if you have two computers at home and want both to share a printer and a connection to the Internet. Some type of “network-in-a-box” solution might solve this problem. Essentially a LAN with a 2- or 3-port hub, connecting cables, and software. In some models, the hub also acts as a router to the Internet.

Data Communications and Computer Networks Chapter 7