Frame Relay Lab 5.2.5 and Challenge Lab 5.2.5 Configuring Frame Relay Subinterfaces – this lab has been re-written Challenge Lab
5.2.5 Configuring Frame Relay Subinterfaces
Configure the interface s0/0
Create sub-interfaces Amsterdam(config-if)#int s0/0.18 point-to-point Amsterdam(config-subif)#description PVC to Paris Amsterdam(config-subif)#ip address 192.168.4.1 255.255.255.0 Amsterdam(config-subif)#frame-relay interface-dlci 18
Configure routing Amsterdam(config)#router eigrp 100 Amsterdam(config-router)#network 192.168.1.0 Amsterdam(config-router)#network 192.168.4.0 Amsterdam(config-router)#network 192.168.5.0
Test connectivity Ping Use the show command Show frame-relay pvc Show frame-relay map Show frame-relay lmi
Challenge Lab
Static route pointing to 192.168.3.2 Paris S0/0 is 192.168.3.2 Configure NAT with address overloading on the single address your S0/0 for all internal addresses Configure S0/1 with PPP encapsulation on link between your Paris router and Berlin router Configure S0/1 with CHAP on link between your Paris router and Berlin router Database to authenticate your peer EIGRP (with AS 300), advertising the link between Paris and Berlin router Redistribute your (static) default route into EIGRP