Lab #3 Solution and Dilution

Outline -Concentration units Molar Concentration. Normal Concentration. - Dilution

2-Molar Concentration the mass required to prepare a solutions g = number of moles mol× molar mass mol/g Number of moles mol= concentration mol/L × volume L

Molar Concentration Example: Calculate the mass of barium nitrate Ba(NO 3 ) 2 required to produce mL of mol/L solution. List the given information: v = mL C = mol/L

Identify the wanted information: Calculate m = of Ba(NO 3 ) 2 Plan and perform the calculations: There is no formula that allows you to convert volume and molar concentration to mass however, volume and concentration can be converted to moles and moles in turn can be converted to mass using molar mass.

The volume must be converted from mL to L. –Convert volume from mL to L:

Calculate the number of moles of solute: Calculate the molar mass of the solute: Ba(NO 3 ) 2

Calculate the mass of the solute to be dissolved: Communicate the required mass: The mass of barium nitrate required to prepare mL of mol/L solution is 2.61 g.

3-Normal Concentration or Normality (N): A normal is one gram equivalent of a solute per liter of solution. Example: a 1 N solution of hydrochloric acid HCl would also be 1 N for H+ or Cl- ions for acid-base reactions.

Equation of Normality Weight of compound = volume (L) X normal concentration X (atomic weight / equivalent weight). Volume = weight / density. Weight = wt. Volume = vol. Concentration = conc.

Normality Example: Prepare 1 L of 0.1 equilibrium Hcl, density= g/ml, atomic wt =36.5, equivalent wt= 1. Wt of compound= 1 X 0.1 X (36.5 / 1) = 3.65 g. Vol. of Hcl = 3.65 / = ml. Vol. of solvent = = ml.

Dilution If lower concentrations than the one available are desired these can be made by dilution. A suitable amount of solution is pipetted into a clean flask and solvent added to the mark.

Example: Prepare a 100 ml Hcl with 20% conc., density 1.14g/ml; by using other solution of 98% Hcl, density 1.84 g/ml. Vol. X conc. (before dilution) = vol. X conc. (after dilution). Weight = density X volume. Wt of 20% Hcl =1.14 X 0.20= g. Wt of 98% Hcl = 1.84 X 0.98 = g. Vol. of 98% Hcl= vol. X con. (of 20% Hcl)/conc. of 98% Hcl. Vol. of Hcl = 100 X / =12.6 ml. Vol. of solvent = 100 – 12.6 = 87.4 ml.

Example 2:Prepare a 100 ml Nacl with 1% conc., density 1.008g/ml; by using other solution of 10% Nacl, density g/ml.

Wt of 1% Nacl= 1.008*0.01= g. Wt of 10% Nacl= 1.146*0.10=0.1146g. Vol of 10% Nacl= (100* )/ = mL Vol. of solvent = 100 – = =91 ml.