Case 2B - Unit A in the south of France lost 40°C of activity in few days Evolution de la temp é rature normalis é e %S de la chage = 5000 ppm, GO d é.

Slides:

Advertisements

Similar presentations

Interfacial Mass Transfer in Gas-Liquid Reactors

Advertisements

Case 3 – Increasing hydrogen partial pressure

Case 1 – Reactor Design 1.Choose main conditions – Pressure, cycle length, type feed, product, flowrate 2.Catalyst volume 3.Optimum mass flux is set at.

Drawings for an Oyster Strainer and Drain Pan This design of strainer is required in AOAC International (953.11) for use in determining the drained.

1/03/09 De 89 à 98. 1/03/09 De 89 à 98 1/03/09 De 89 à 98.

1.AA 1. 2 times as big as France 2. 4 times as big as France 3. 8 times as big as France 4. more than 10 times as big as France Q37- Canada is : Solution.

Catalytic cracking Catalytic cracking

Stainless steel 316 CNMG MMC 2025 C5-PCLNL HP 3,0 1,5 1,0 0,5 0,25 0,10,15 0,20,25 0,30,350,40,5 1 v c 180 m/min Coolant pressure 7 bar Feed.

C5-PCLNL HP 3,0 1,5 1,0 0,5 0,25 0,10,15 0,20,25 0,30,350,40,5 1 Stainless steel 316 CNMG MM 2025 v c 180 m/min Coolant pressure 7 bar Feed.

© NMISA 2010 INTERNATIONAL ACTIVITIES AT THE NMISA HUMIDITY LABORATORY DURING 2009/2010 Deona Jonker.

Theodore Todorov Pixel mechanics november 8th Inner detector upgrade / IBL Activities on cooling LAPP LAPP team Jacky Ballansat, Patrick.

Feasibility Analysis h T1 T2 T3 T4 T5 One Dimensional Transient Analysis One Dimensional Finite Difference Steady State Analysis T1 and T5 will be known.

Awake CNGS Window and Shutter Szymon Sroka, Antonio Perillo-Marcone — EN/STI/TCD Thermo-Mechanical Calculations.

RETROFIT EMISSION CONTROL TECHNOLOGIES FOR HEAVY DUTY DIESEL ENGINES - THE STATE OF THE ART Sougato Chatterjee Johnson Matthey Catalysts BAQ 2004.

Control of Particulate Matter from a Sabatier Catalyst Bed HSL 126 Loel Goldblatt, Hamilton Sundstrand Space Systems International, Inc. Karen Murdoch,

Gasifier/Feedstock Effect on Syngas Composition Department of Mechanical Engineering, Yuan Ze University 1.

Mechanical Design Of Process Equipment.

23 Jan 2007 LASA Cryogenics Global Group 1 ILC Cryomodule piping L. Tavian for the cryogenics global group.

Propylene Oxide Production by ARCO Process Done By Fiasal Juhail.

Liquid Metal Power Cycle By: Se Joong (David) Kang.

Purification of Exhaust Gases Removal of pollutants from exhaust Removal of pollutants from exhaust gas after they leave the engine cylinder can be done.

Ultra Low sulfur diesel l Sulfur components n which are present n which are difficult n effect of current diesel HT l How to get to ULSD (~ 15 ppmwt) n.

Chemical Reactors.

The Importance of Distribution. Manifold Position And Vapor Trail.

Introduction :-  Energy conservation means saving of nonrenewable energy resources.  Development of science which is destroy natural resources, it is.

T062:Q10. A metal rod has a length of 7.30 m at 15  C and a length of 7.40 m at 95  C. What is the temperature of the rod when its length is 7.21.

Chapter 8 Part 0 – Hierarchical Design Procedures.

Microstructure and properties of the new Pt-Rh based alloys for high temperature applications Zbigniew M. Rdzawski and Jerzy P. Stobrawa The Non-Ferrous.

Chapter 5 – Earth’s Weather

INGAS 6 month meeting, Prague, May 2009 INGAS INtegrated GAS Powertrain 1 Politecnico di Milano Dipartimento di Energia Research activity from Nov.

1. 316L Aqua-Plex Microscopic Images of Aqua-Plex and 316L Stainless 2.

Metal Soldering Connectors Kovar connectors 6mm diameter with a small pin to enter in the hole Developed for NA62 project 3µm.

Evaluation of the causes of increasing the pressure drop of fixed bed reactor RCD unit ALI SHAERI NIOEC CO.

BASICS OF UK DETAILING. BS Codes : 1) Design code: BS8110 2) Detailing codes: BS8666 BS4449.

Energy Solving Quantitative Energy Problems

Page 1 Sapphire by pass line  Design Concept of Cooling Water System ： Funnel 10 line Tank 2 10 tones Chiller -20cm tilt - 5cm distance between growers.

Types of Bioreactors / Fermenters

IN2P3. Why Titanium for cooling circuits? Titanium material collect the most important criteria for cooling circuit design: Low CTE: important parameter.

A magnet is an object or a device that gives off an external magnetic field. Basically, it applies aforce over a distance on other magnets, electrical.

Last Week of Project Terry A. Ring. Project Schedule.

Stainless steel 316 CNMG MF 2025 C5-PCLNL HP 3,0 1,5 1,0 0,5 0,25 0,10,15 0,20,25 0,30,350,40,5 1 v c 180 m/min Coolant pressure 7 bar Feed.

1Korea University of Technology and Education 2 Generation Common Rail VGT Variable Swirl 32Bit Computer Elec. Controlled EGR Flap C P F Electronically.

。 33 投资环境 3 开阔视野提升竞争力。 3 嘉峪关市概况。 3 。 3 嘉峪关是一座新兴的工业旅游城市，因关得名，因企设市，是长城文化与丝路文化交汇点，是全国唯一一座以长城关隘命名的城市。嘉峪关关城位于祁连山、黑山之间。 1965 年建市，下辖雄关区、镜铁区、长城区，全市总面积 2935.

WMNC – Dallas – june 9th 2016 Microsensors for instrumented medical tools for their real time monitoring Agnès Bonvilain TIMA Laboratory.

The reading is 7.38 mm. The reading is 7.72 mm.

SS1672 (through hard) 45 HRC VBGW S01020F 7025 vc 155 m/min

Methane to Aromatics Aric Von Buettner.

Evaporator Design for concentrating cane juice

PRO-FLO X™ 25 MM (1”) ADVANCED™ METAL NATURAL GAS POWERED PUMP

MVD Mechanics update EXTERNAL FRAME: NEW DESIGN

Catalytic zeolite membrane reactors for the selective CO oxidation

Date of download: 10/27/2017 Copyright © ASME. All rights reserved.

Coolant pressure 7 bar flooding

MULTISALT-CARBON PORTABLE CHEMICAL HEAT PUMP

INTEGRATED CATALYTIC MEMBRANE REACTOR PROCESS FOR CO2 REFORMING OF METHANE by Ifeyinwa Orakwe Supervisor: Prof Edward.

Stainless Steel Water Well Casing.

Perforated Casing Pipe. Stainless Steel Perforated Casing.

SS1312 CNMG PMC 4225 vc 275 m/min Coolant pressure 7 bar 3,0 1,5

Crude oil Treatment process

Pixel Detector System (Barrel & Forward)

Perforated Casing Pipe. Stainless Steel Perforated Casing.

SS1672 CNMG PM 4225 vc 245 m/min Coolant pressure 7 bar 3,0 1,5

SS1672 CNMG PF 4225 vc 245 m/min Coolant pressure 7 bar 3,0 1,5

EDLC(Embedded system Development Life Cycle ).

Tracer Applications.

Physical Properties.

THE GROWTH ENVIRONMENT.

Presentation transcript:

Case 2B - Unit A in the south of France lost 40°C of activity in few days Evolution de la temp é rature normalis é e %S de la chage = 5000 ppm, GO d é sulfur é = 320 ppm, VVH = 1 h, PPH 2 = 25 bar, H 2 /Hc = 90 Nm 3 /m Temp é rature normalis é e en °C Jours de cycle Case 2 – Unit Poor Performances

Possible causes: - Catalyst deactivation during shut-down? - Catalyst pollution by heavier feeds (metals)? - Gas/Liquid maldistribution? - … Always the same: WHAT CHANGED BEFORE THEN AND NOW? Case 2 – Unit Poor Performances

250 mm Reactor diameter mm Beam of 321 stainless steel Thermal growth of 2 mm/m/100°C (general rule for steels is 1 mm/m/100°C)

Case 2 – Unit Poor Performances temperature HP separator liquid level flowrate HP separator pressure Possible causes: - beam dilatation? - other?