R&D Towards a Solid-State Central Tracker in NA World-Wide Review of LC Tracking January 8, 2004 Bruce Schumm SCIPP & UC Santa Cruz.

Slides:



Advertisements
Similar presentations
Mostly by Gwyn Williams and the JLab Team, Presented by D. Douglas Working Group 4 Diagnostics & Synchronization Requirements Where we are and what needs.
Advertisements

Update of ILC Tracker Alignment Based on Frequency Scanned Interferometry University of Michigan ILC Group (Hai-Jun Yang, Alexander Harvey Nitz, Eui Min.
Frequency Scanned Interferometry for ILC Tracker Alignment University of Michigan ILC Group (Hai-Jun Yang, Eui Min Jung, Sven Nyberg, Keith Riles) Vancouver.
R&D Towards a Solid-State Central Tracker in NA World-Wide Review of LC Tracking January 8, 2004 Bruce Schumm SCIPP & UC Santa Cruz.
Stephen Gibson, ATLAS Offline Alignment, 2 nd July Incorporating FSI with the Offline Alignment Overview ATLAS Group, University of Oxford Stephen.
S. M. Gibson, IWAA7 November ATLAS Group, University of Oxford, UK S. M. Gibson, P. A. Coe, A. Mitra, D. F. Howell, R. B. Nickerson Geodetic Grids.
May 14, 2015Pavel Řezníček, IPNP Charles University, Prague1 Tests of ATLAS strip detector modules: beam, source, G4 simulations.
Long Shaping-time Silicon Readout Bruce Schumm University of California, Santa Cruz Amsterdam ECFA-DESY Workshop April
SCIPP R&D on Time-Over-Threshold Electronics and Long-Ladder Readout Beijing Linear Collider Workshop Beijing, China February Bruce Schumm.
Long Shaping-time Silicon Readout Bruce Schumm UC Santa Cruz Arlington Linear Collider Workshop January
Victoria04 R. Frey1 Silicon/Tungsten ECal Status and Progress Ray Frey University of Oregon Victoria ALCPG Workshop July 29, 2004 Overview Current R&D.
SCIPP R&D on Long Shaping- Time Electronics SLAC SiD Workshop October 26-29, 2006 Bruce Schumm.
Testbeams for Tracking Prototypes Two categories: TPC/Gaseous tracking – please chime in Solid-state (silicon  strip) tracking – will present some issues.
SCIPP R&D on Time-Over-Threshold Electronics and Long-Ladder Readout Beijing Linear Collider Workshop Beijing, China February Bruce Schumm.
LiCAS Project: FSI Overview Richard Bingham, Edward Botcherby, Paul Coe, John Green, Grzegorz Grzelak, Ankush Mitra, John Nixon, Armin Reichold University.
Progress towards a Long Shaping-Time Readout for Silicon Strips Bruce Schumm SCIPP & UC Santa Cruz SiLC Meeting November 18, 2005.
The SCIPP LSTFE Time-Over- Threshold Electronics Readout Project SILC Meeting, Santander, Spain December, 2008 Bruce Schumm Santa Cruz Institute.
Thoughts on B-Field Uniformity for the SD Tracker SID Tracking Meeting October 22, 2004 Bruce Schumm UC Santa Cruz March 2001 Baseline Thanks to Harry.
Progress towards a Long Shaping-Time Readout for Silicon Strips Bruce Schumm SCIPP & UC Santa Cruz SLAC LC Workshop January 6-10, 2004.
Progress towards a Long Shaping-Time Readout for Silicon Strips Bruce Schumm SCIPP & UC Santa Cruz SLAC LCWS05 July 28-31, 2004.
Position sensing in a GEM from charge dispersion on a resistive anode Bob Carnegie, Madhu Dixit, Steve Kennedy, Jean-Pierre Martin, Hans Mes, Ernie Neuheimer,
28 June 2002Santa Cruz LC Retreat M. Breidenbach1 SD – Silicon Detector EM Calorimetry.
SCIPP R&D on Long Shaping- Time Electronics 4 th SiLC Meeting Barcelona, Spain (by remote connection) December Bruce Schumm.
Progress towards a Long Shaping-Time Readout for Silicon Strips Bruce Schumm SCIPP & UC Santa Cruz SLAC LCWS05 July 28-31, 2004.
SCIPP R&D on Long Shaping- Time Electronics SLAC SiD Workshop October 26-28, 2006 Bruce Schumm.
SCIPP R&D on Long Shaping- Time Electronics ALCPG Workshop Vancouver, BC, Canada July 19-22, 2006 Bruce Schumm.
SCIPP R&D on Time-Over- Threshold Electronics and Long- Ladder Readout LCWS 07 DESY May 30 – June Bruce Schumm Santa Cruz Institute for Particle.
Progress towards a Long Shaping-Time Readout for Silicon Strips Bruce Schumm SCIPP & UC Santa Cruz Victoria Linear Collider Workshop July 28-31, 2004.
LumiCal Alignment System Status report Leszek Zawiejski, Tomasz Wojtoń, Arkadiusz Moszczyński Institute of Nuclear Physics PAN, Cracow 25th FCAL Collaboration.
Design and test of a high-speed beam monitor for hardon therapy H. Pernegger on behalf of Erich Griesmayer Fachhochschule Wr. Neustadt/Fotec Austria (H.
Performance of the DZero Layer 0 Detector Marvin Johnson For the DZero Silicon Group.
Coincidence analysis in ANTARES: Potassium-40 and muons  Brief overview of ANTARES experiment  Potassium-40 calibration technique  Adjacent floor coincidences.
Silicon Microstrip R&D at SCIPP and the University of California at Santa Cruz Future Linear Colliders Spanish Network Universidad de Sevilla February.
Pierpaolo Valerio.  CLICpix is a hybrid pixel detector to be used as the CLIC vertex detector  Main features: ◦ small pixel pitch (25 μm), ◦ Simultaneous.
Fine Pixel CCD Option for the ILC Vertex Detector
IPBSM status and plan ATF project meeting M.Oroku.
David Urner, Oxford University, RHUL – June StaFF Stabilization of Final Focus Motion Stabilization with Nano-Meter Precision David Urner Paul Coe.
Linear Collider TPC R&D in Canada Bob Carnegie, Madhu Dixit, Dean Karlen, Steve Kennedy, Jean-Pierre Martin, Hans Mes, Ernie Neuheimer, Alasdair Rankin,
Progress towards a Long Shaping-Time Readout for Silicon Strips Bruce Schumm SCIPP & UC Santa Cruz Cornell LC Workshop July 13-16, 2003.
The Gossamer Tracker: A Novel Concept for a LC Central Tracker Bruce Schumm SCIPP & UC Santa Cruz UC Davis Experimental Particle Physics Seminar June 3,
Frequency Scanned Interferometer for ILC Tracker Alignment Hai-Jun Yang, Sven Nyberg, Keith Riles University of Michigan, Ann Arbor SLAC LCD Tele-Conference.
ALCPG Tracking Session 1/11/03 K. Riles - U. Michigan1 Status Report on Michigan Group Tracker Alignment R&D Keith Riles, Jin Yamamoto, Haijun Yang University.
Highlights From ILC R&D at SCIPP LCWS 2010 Friendship Hotel, Beijing, PRC March Bruce Schumm Santa Cruz Institute for Particle Physics.
Frequency Scanned Interferometer Demonstration System Tim Blass, Jason Deibel, Sven Nyberg, Keith Riles, Haijun Yang University of Michigan, Ann Arbor.
Frequency Scanned Interferometer Demonstration System Jason Deibel, Sven Nyberg, Keith Riles, Haijun Yang University of Michigan, Ann Arbor American Linear.
Frequency Scanned Interferometer for LC Tracker Alignment Hai-Jun Yang, Sven Nyberg, Keith Riles University of Michigan, Ann Arbor Department Of Energy(DOE)
Overview of SiD Tracking Rob Kutschke,Fermilab LSWS07 June 1, 2007 (Layer 5) (Layer 1) VXD.
Tracking Group Summary Bruce `Lefty’ Schumm UC Santa Cruz Arlington Linear Collider Workshop January 9-11, 2003.
10-Minute Overview of North American Tracking R&D Amsterdam LC Tracking Review March 30, 2003 Bruce Schumm/UC Santa Cruz.
SCIPP R&D on the International Linear Collider Detector DOE Site Visit June 28, 2005 Presenter: Bruce Schumm.
The stabilisation of the final focus (StaFF) system Sun 12 th March 2006 MDI – LCWS06 at I I Sc Bangalore David Urner, Paul Coe, Armin Reichold.
LHCb Vertex Detector and Beetle Chip
Frequency Scanned Interferometry for ILC Tracker and Final Focus Magnet Alignment Haijun Yang, Tianxiang Chen, Keith Riles University of Michigan, Ann.
2002 LHC days in Split Sandra Horvat 08 – 12 October, Ruđer Bošković Institute, Zagreb Max-Planck-Institute for Physics, Munich Potential is here...
Frequency Scanned Interferometer for ILC Tracker Alignment Hai-Jun Yang, Sven Nyberg, Keith Riles University of Michigan, Ann Arbor International Linear.
MONALISA Update David Urner ATF2 Meeting Dec
Status of Forward Calorimetry R&D: Report from the FCAL Collaboration Bruce A. Schumm Santa Cruz Institute for Particle Physics University of California,
Laser Alignment System for LumiCal and BeamCal Arkadiusz Moszczyński, Wojciech Wierba, Leszek Zawiejski Institute of Nuclear Physics PAN, Cracow 22nd FCAL.
Silicon Microstrip Tracking R&D in the US SiLC Collaboration Meeting University of Paris VII January 25, 2010 Bruce Schumm Santa Cruz Institute for Particle.
10-meter Interferometer Results M. Woods (special thanks to Steve Myers and Tim Slaton) Jan. 31, 2000 Commissioning Setup System Noise Monte Carlo simulation.
Timing capabilities of Ultra-Fast Silicon Detector 1 A parameterization of time resolution A program to calculate Time resolution UFSD Timing capabilities.
Pixel Sensors for the Mu3e Detector Dirk Wiedner on behalf of Mu3e February Dirk Wiedner PSI 2/15.
L. Ratti, M. Manghisoni Università degli Studi di Pavia INFN Pavia
Integration and alignment of ATLAS SCT
Frequency Scanned Interferometry for ILC Tracker Alignment
Frequency Scanned Interferometer for ILC Tracker Alignment
R&D Towards a Solid-State Central Tracker in NA
Enhanced Lateral Drift (ELAD) sensors
International Tracking Testbeam Needs
Presentation transcript:

R&D Towards a Solid-State Central Tracker in NA World-Wide Review of LC Tracking January 8, 2004 Bruce Schumm SCIPP & UC Santa Cruz

The SD Tracker

Frequency Scanned Interferometer Demonstration System Jason Deibel, Sven Nyberg, Keith Riles, Haijun Yang University of Michigan, Ann Arbor

Physics Goals and Background To Carry out R&D toward a direct, quasi real time and remote way of measuring positions of critical tracker detector elements during operation. The 1-Dimension accuracy of absolute distance is on the order of 1 micron. Basic idea: To measure hundreds of absolute point-to-point distances of tracker elements in 3 dimensions by using an array of optical beams split from a central laser. Absolute distances are determined by scanning the laser frequency and counting interference fringes. Assumption: Thermal drifts in tracker detector on time scales too short to collect adequate data samples to make precise alignment. Background – some optical alignment systems RASNIK system: used in L3, CHORUS and CDF Frequency Scanned Interferometer(FSI): used in ATLAS [A.F. Fox-Murphy et al., NIM A383, 229(1996)] Focusing here on FSI system for NLC tracker detector Haijun Yang; U. of Michigan

Principle of Distance Measurement The measured distance can be expressed by + constant end corrections c - speed of light,  N – No. of fringes,  - scanned frequency n g – average refractive index of ambient atmosphere Assuming the error of refractive index is small, the measured precision is given by: (  R / R) 2 = (   N /  N) 2 + (   v /  ) 2 Example: R = 1.0 m,  = 6.6 THz,  N ~ 2R  /c = To obtain  R  1.0  m, Requirements:   N ~ 0.02,   v ~ 3 MHz Haijun Yang; U. of Michigan

FSI Demonstration System In Lab Laser Mirror Beamsplitters Photodetector Fabry-Perot Interferometer Retroreflector

Absolute Distance Measurements The measurement spread of 30 sequential scans performed vs. number of measurements/scan(N meas ) shown below. The scanning rate was 0.5 nm/s and the sampling rate was 125 KS/s. It can be seen that the distance errors decrease with increasing N meas. If N meas = 2000, the standard deviation (RMS) of distance measurements is 35 nm, the average value of measured distances is  m. The relative accuracy is 50 ppb. Haijun Yang; U. of Michigan

Summary and Outlook A simple FSI demonstration system was constructed to make high-precision absolute distance measurements. A high accuracy of 35 nm for a distance of about 0.7 meter under laboratory conditions was achieved. Two new multi-distance-measurement analysis techniques were presented to improve absolute distance measurement and to extract the amplitude and frequency of vibration. Major error sources were estimated, and the expected error was in good agreement with measured residual spread from real data. One paper, ‘High-precision Absolute Distance Measurement using Frequency Scanned Interferometer’, will be submitted to Optics Letters. Haijun Yang; U. of Michigan

Summary and Outlook We are working on FSI with fibers, one fiber for beam delivery and the other fiber for return beam. Much work needed before practical application of FSI system.  Fibers necessary for remote inner tracker interferometer. The technique shown here does NOT give comparable accuracy under realistic detector conditions (poorly controlled temperature). Will investigate Oxford ATLAS group’s dual-laser scanning technique. Michigan group rapidly coming up to speed on technology, but much work lies ahead. Haijun Yang; U. of Michigan

Pulse Development Simulation Long Shaping-Time Limit: strip sees signal if and only if hole is col- lected onto strip (no electrostatic coupling to neighboring strips) Incorporates: Landau statistics (SSSimSide; Gerry Lynch LBNL), detector geometry and orientation, diffusion and space-charge, Lorentz angle, electronic response

Result: S/N for 167cm Ladder At shaping time of 3  s; 0.5  m process qualified by GLAST

Analog Readout Scheme: Time-Over Threshold (TOT) TOT/   /r TOT given by difference between two solutions to (RC-CR shaper) Digitize with granularity  /n dig

Why Time-Over-Threshold? TOT/  Signal/Threshold = (  /r) x min-i With TOT analog readout: Live-time for 100x dynamic range is about 9  With  = 3  s, this leads to a live-time of about 30  s, and a duty cycle of about 1/250  Sufficient for power- cycling!

Single-Hit Resolution Design performance assumes 7  m single-hit resolution. What can we really expect? Implement nearest-neighbor clustering algorithm Digitize time-over-threshold response (0.1*  more than adequate to avoid degradation) Explore use of second `readout threshold’ that is set lower than `triggering threshold’; major design implication

RMS Gaussian Fit RMS Gaussian Fit Readout Threshold (Fraction of min-i) Trigger Threshold 167cm Ladder 132cm Ladder Resolution With and Without Second (Readout) Threshold

Lifestyle Choices Based on simulation results, ASIC design will incorporate: 3  s shaping-time for preamplifier Time-over-threshold analog treatment Dual-discriminator architecture The design of this ASIC is now underway.

Challenges Cycling power quickly is major design challenge Warm machine: At 120 Hz, must conduct business in ~150  s to achieve 98% power reduction What happens when amplifier is switched off? Drift of ~10 mV (or 1 fC in terms of charge) enough to fake signal when amp switched back on Challenging for circuit design

More Challenges Trying to reach dynamic range of >100 MIP to allow for dEdX measurement of exotic heavy particles At comparitor, MIP is about 500 mV, rail is about 1V  Active `Ramp Control’ forces current back against signal for few MIP and greater.

Looking ahead Challenges continue to arise in circuit design (but at least they’re being caught before the chip is made!) Layout in specific technology (0.25  m mixed-signal RF process from Taiwan Semiconductor) lies ahead; substantial experience at SLAC and within UCSC School of Engineering) Long ladder, Nd:YAG pulsing system, readout under development Project is very challenging, but progress is being made, albeit slower than first envisioned.