Use Quartus II Design Procedure 建立項目文件 建立設計文件 軟體模擬 編譯除錯 修改錯誤 源始碼輸入原理圖輸入 選擇晶片，指定接腳 驗證成功 編譯後下載 有錯 無錯 有錯

Use Quartus II Create Project

Use Quartus II Set project path

Use Quartus II Create new design file

Use Quartus II Choose the type of design file

Use Quartus II Starting a design

Use Quartus II Insert a symbol for logic element (click the right button of mouse)

Use Quartus II Get into and choose “primitives” and then logic

Use Quartus II Select “and2” and press “ok”

Use Quartus II Set input node: enter the symbol selection again to select “input”

Use Quartus II Set both input and output node

Use Quartus II Connect the lines

Use Quartus II Complete and save

Use Quartus II Start compilation

Use Quartus II Set node name

Lab. 1 Full-Adder Design and Simulation

content Set End time of Quartus II simulation Set Grid of Quartus II simulation Set the Time interval of clock/counter Quartus II simulation Design Full adder Simulation (timing/functional)

Timing/Functional Simulation Assignments Setting Simulator settings Simulation mode (timing/functional) For functional simulation you should do the following procedures before starting simulation: Processing Generate Functional Simulation Netlist