Copyright © Ed2Net Learning, Inc.1 Angle and Angles Measurement Geometry.

Slides:



Advertisements
Similar presentations
Constructing Lines, Segments, and Angles
Advertisements

2-5 Proving Angles Congruent
LESSONS 1-5 TO 1-7 Accelerated Algebra/Geometry Mrs. Crespo
Lines, Segments, and Rays. Line  A line is perfectly straight and extends forever in both directions. Any two points on the line can be used to name.
Geometric Constructions: Congruent Segments and Congruent Angles Geometry Mr. Zampetti Unit 2, Day 1.
Geometric Terms 7 Math: Sections 7-1 and 7-2. Lines and Planes Point - indicates a location in space. Line - A series of points that extend forever in.
Line Segments and Angles
 RAY  RAY: Defined as …Ray AB is part of line AB that contains Point A and all the points on line AB that are on the same side of point A as point B.
Adjacent, vertical, complementary and supplementary angles
Angle Relationships.
Section 1-5: Constructions SPI 32A: Identify properties of plane figures TPI 42A: Construct bisectors of angles and line segments Objective: Use a compass.
Bisecting Segments and Angles
1. Draw two points. Label one point A and the other point B.
Warm-up 1)What 1)What is the notation for angle with vertex at A and whose rays pass through points B and C? 2)What 2)What is the definition of an angle?
Perpendicular Bisector of a Segment and Angle Bisector
Constructions. Supplies Paper (thick stack) Compass Straight Edge.
3.1 Duplicating Segments and Angles
1.6 Basic Constructions.
In Chapter 1, you studied many common geometric shapes and learned ways to describe a shape using its attributes. In this chapter, you will further investigate.
Module 2: Geometric Constructions
CHAPTER 1: Tools of Geometry
Math I CAN find the measure of angles. I CAN construct angles.
Chapter 13 L13-1 Notes: Angles. Vocabulary Angles have two sides that share a common endpoint called the vertex of the angle.
5.3 Kites and Trapezoids. Kite Investigation Recall the shape of a toy kite. What definition would you write to describe the shape in geometric terms?
1.7 Basic Constructions.
Geometry Vocabulary 7-1 By: Hilary Clinger & Alex Shipherd.
Geometry Vocabulary Introduction to Classifying Angles.
Defining Terms This statement defines a protractor: “A protractor is a geometry tool used to measure angles.” First, you classify what it is (a geometry.
 TEKS Focus:  (5)(B) Construct congruent segments, congruent angles, a segment bisector, an angle bisector, perpendicular lines, the perpendicular bisector.
Geometric Constructions October - Ch. 3 Part of Unit 2 – Lines & Angles.
Geometry Section 1.4 Angles and Their Measures. An *angle is the figure formed by the union of two rays with a common endpoint. The rays are called the.
7-2 Angles Course 1 Warm Up Warm Up Lesson Presentation Lesson Presentation Problem of the Day Problem of the Day.
Jose M Bravo Jr. Chapter 11.1 Introduction to Basic Geometry Basic Geometric Concepts.
Slide 1 Copyright © 2015, 2011, 2008 Pearson Education, Inc. Lines and Angles Section9.1.
POINT A point is a specific location This is an example of a point : A B.
Chapter 1: Tools of Geometry
Lesson 1.7 – Basic Constructions “MapQuest really needs to start their directions on #5. Pretty sure I know how to get out of my neighborhood”
Unit 1 All About Angles and Constructions (not necessarily in that order) Ms. Houghton Geometry Honors Fall 2014.
Chapter Congruence, and Similarity with Constructions 12 Copyright © 2013, 2010, and 2007, Pearson Education, Inc.
Lesson 10-1: Constructions 1 Lesson 10-1 Constructions.
Angles Project Endiya, Nick, and Mason 5th period Let’s get learning…
Geometry Basic Concepts Chapter 1 Unit 1 Coordinate Geometry and Basic Constructions.
Welcome to Interactive Chalkboard Mathematics: Applications and Concepts, Course 1 Interactive Chalkboard Copyright © by The McGraw-Hill Companies, Inc.
Trapezoids and Kites Geometry 6-5.
Constructions Bisect – To divide something into two equal parts Perpendicular – Lines that intersect to form right angles. Today’s constructions: –Bisect.
{ Constructions Duplicating and Line and an Angle.
Slide 1-1 Copyright © 2014 Pearson Education, Inc. 1.6 Constructions Involving Lines and Angles.
Lesson 10-1: Constructions
Measuring Angles Unit 1 Lesson 4.
1.6 Basic Constructions SOL: G4 Objectives: The Student Will …
Angle Relationships.
Geometric Constructions
Constructions.
12 Chapter Congruence, and Similarity with Constructions
Constructions.
8.2 Perpendicular Lines.
1.2 Informal Geometry and Measurement
Line and Angle Relationships
Day 36 – Copying and bisecting a line segment and an angle
Geometry Vocabulary.
Lesson 10-1: Constructions
Chapter 2 : Angles Vocabulary Terms.
Basic Constructions Skill 06.
Use a ruler and a protractor to draw a segment 5 cm long and a 50 degree angle . Then use the ruler and a protractor to draw a bisector of the segment.
Once you have found your seat, grab a compass and a straight edge.
Bisecting an angle.
Copyright © Cengage Learning. All rights reserved.
Basic Constructions.
Geometry Unit 1: Foundations
Types of Angles TC2MA234.
Presentation transcript:

Copyright © Ed2Net Learning, Inc.1 Angle and Angles Measurement Geometry

Copyright © Ed2Net Learning, Inc.2 Angles Angles have two sides that share a common endpoint called the vertex of the angle. side vertex

Copyright © Ed2Net Learning, Inc.3 Angles The most common measure for angles is the degree. A circle can be separated into 360 equal-sized parts. Each part would make up a one-degree (1°) angle. 1 degree (°) Why 360 degrees? Probably because old calendars (such as the Persian Calendar) used 360 days for a year - when they watched the stars they saw them revolve around the North Star one degree per day.

Copyright © Ed2Net Learning, Inc.4 Types of Angles Right angle This symbol indicates a right angle. Exactly 90° Acute angle Less than 90° Obtuse angle between 90° and 180° Straight angle Exactly 180° Quarter of a circle Half of a circle

Copyright © Ed2Net Learning, Inc.5 Measure Angles Align the center of the protractor with the vertex of the angle. The angle measures 150°. It is an obtuse angle.

Copyright © Ed2Net Learning, Inc.6 Measure Angles Align the center of the protractor with the vertex of the angle. The angle measures 75°. It is an acute angle.

Copyright © Ed2Net Learning, Inc.7 Your Turn! Use a protractor to find the measure of each angle. Then classify each angle as acute, obtuse, right, or straight.

Copyright © Ed2Net Learning, Inc.8 Pairs of Angles Two angles whose sum is 90° are complementary angles m 1=30°, m 2=60°, m 1+ m 2 = 90°

Copyright © Ed2Net Learning, Inc.9 Pairs of Angles Two angles whose sum is 180° are supplementary angles m 1=120°, m 2=60°, m 1+ m 2 = 180°

Copyright © Ed2Net Learning, Inc.10 Your Turn! Angles M and N are supplementary. If m M = 85° what is the measure of N?

Copyright © Ed2Net Learning, Inc.11 Estimate Angle Measures To estimate the measure of an angle, compare it to an angle whose measure you know. About 90° About 60° You could use the corner of a piece of paper as a reference for 90°. You could fold the corner in half for 45°, and use the edge of the paper for 180°.

Copyright © Ed2Net Learning, Inc.12 Your Turn! Estimate the measure of each angle.

Copyright © Ed2Net Learning, Inc.13 Draw an Angle Step 1: Draw one side of the angle. Then mark the vertex and draw an arrow.

Copyright © Ed2Net Learning, Inc.14 Draw an Angle Step 2: Place the center point of protractor on the vertex. Align the mark labeled 0 on the protractor with the line. Find 74°on the correct scale and make a pencil mark.

Copyright © Ed2Net Learning, Inc.15 Draw an Angle Step 3: Use a straightedge to draw the side that connects the vertex and the pencil mark.

Copyright © Ed2Net Learning, Inc.16 Your Turn! Use a protractor and a ruler to draw the angles:  68°  105°

Copyright © Ed2Net Learning, Inc.17 Congruent Segments A line segment is a straight path between two endpoints. To indicate the line segment JK, write JK. Line segments that have the same length are called congruent segments. J K

Copyright © Ed2Net Learning, Inc.18 Congruent Segments Step 1: Draw JK. The use a ruler to draw a line segment longer than JK. Label it LM. J K L M

Copyright © Ed2Net Learning, Inc.19 Congruent Segments Step 2: Place the compass at J and adjust the compass setting so you can place the pencil tip on K. The compass setting equals the length of JK. J K L M

Copyright © Ed2Net Learning, Inc.20 Congruent Segments Step 3: Using this setting, place the compass tip at L. Draw an arc to intersect LM. Label the intersection LM. Label the intersection P. LP is congruent to JK. L M P

Copyright © Ed2Net Learning, Inc.21 Congruent Angles Step 1: Draw JKM. Then use a straightedge to draw ST. KM J

Copyright © Ed2Net Learning, Inc.22 Congruent Angles Step 2: Place the tip of the compass at K. Draw an arc to intersect both sides of JKM. Label the points of intersection X and Y. KM J X Y

Copyright © Ed2Net Learning, Inc.23 Congruent Angles Step 3: Using this setting, place the compass at point S. Draw an arc to intersect ST. Label the intersection W. ST W

Copyright © Ed2Net Learning, Inc.24 Congruent Angles Step 4: Place the point of the compass at Y. Adjust so that the pencil tip is on X. KM J X Y

Copyright © Ed2Net Learning, Inc.25 Congruent Angles Step 5: Using this setting, place the compass at W. Draw an arc to intersect the arc in Step 3. Label the intersection U. Draw SU. JKM is congruent to UST. ST U W

Copyright © Ed2Net Learning, Inc.26 Let us take a Break!

Copyright © Ed2Net Learning, Inc.27

Copyright © Ed2Net Learning, Inc.28 Bisectors To bisect something means to separate it into two equal parts. You can use a straightedge and a compass to bisect the segments and angles.

Copyright © Ed2Net Learning, Inc.29 Bisect a Line Segment Step 1: Draw AB Step 2: Place the compass at point A. Using a setting greater than one half the length of AB, draw two arcs as shown. Step 3: Using the same setting, place the compass at point B. Draw an arc above and below as shown. AB AB The arcs should intersect

Copyright © Ed2Net Learning, Inc.30 Bisect a Line Segment Step 4: Use a ruler to align the intersections. Draw a segment that intersects AB. Label the intersection M. AB M The vertical line segment bisects AB at M. The segments AM and MB are congruent. This can be written as AM  MB. This means that the measure of AM is equal to the measure of MB. The line segments are also perpendicular. That is, they meet at right angles.

Copyright © Ed2Net Learning, Inc.31 Your Turn! Draw a line segment measuring 6 centimeters. Then use a ruler and compass to bisect the segment.

Copyright © Ed2Net Learning, Inc.32 Bisect an Angle Step 1: Draw MNP Step 2: Place the compass at point N and draw an arc that intersects both sides of the angle. Label the points of intersection X and Y. M N P M N P X Y

Copyright © Ed2Net Learning, Inc.33 Bisect an Angle Step 3: With the compass at point X, draw an arc as shown. Step 4: Using the same setting, place the compass point at Y and draw another arc as shown. Label the intersection Z. M N P X Y Z

Copyright © Ed2Net Learning, Inc.34 Bisect an Angle Step 5: Use a ruler to draw NZ. M N P X Y Z NZ bisects MNP. Therefore, MNZ and ZNP are congruent. This can be written as MNZ  ZNP

Copyright © Ed2Net Learning, Inc.35 Your Turn! Draw a 120°angle. Then use a straightedge and a compass to bisect the angle.

Copyright © Ed2Net Learning, Inc.36 Assessment 1. Explain the difference between acute angles and obtuse angles. 2. Define bisect. 3. If m A = 108° and A and B are supplementary, find m B. 4. Angles J and K are complementary. Find m J if m K =58°.

Copyright © Ed2Net Learning, Inc.37 Assessment 5. Describe how the corner of a textbook can be used to estimate the measure of an angle.