Bang & Olufsen BtB – How to update the BtB module

1. Connecting Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack) RS232 is called “1 HOTEL DATA” on BV10. On BeoVision 7-40 use the port labeled ‘RS232’ On BeoSystem 3 use the port labeled ‘RS232’ BeoVision 8/10 BtB module BeoVision 7-40 back RS232 port and OC is not always left and right. On BV10-40 and 46” RS232 is located to the right, when looking from behind. One BV10-32 RS232 is located to the left. On BeoVision 10, RS232 is always called ”1 HOTEL DATA” and OC is always called ”3. Service”

1. Connecting Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack) RS232 is called “1 HOTEL DATA” on BV10. On BeoVision 7-32 use the P2 connector. BeoVision 7-32 back

2. Updating the module Open the BtB upgrader. Follow the instruction of the BtB upgrader and press Start. Bang & Olufsen Concept Store Bang & Olufsen Concept Store

3. Verify software version First disable the BtB mode by pressing “Menu, 0, 0, GO” on the remote, if this has already been set. Turn the TV on and press Menu Move the cursor to the OPTIONS menu and press “0, 0, GO”. Now choose the Business To Business menu. TV SETUP TUNING SLEEP TIMER ▼select accept o SERVICE MENU MONITOR TV-TUNER BUSINESS TO BUSINESS DVB SERVICE PRODUCT TYPE AUDIO SERVICE SETTINGS ▼select accept o OPTIONS BUSINESS TO BUSINESS

3. Verify software version In the Business To Business menu in the TV service menu, you can find the BtB application software version (in this case 6.62v). In here you will also be able to enable or disable the BtB mode. BUSINESS TO BUSINESS BTB ENABLE OFF BTB SETTINGS BTB VERIFICATION TEST BTB INSTALLATION SETUP STBC POWER ON 5 V BTB AP SW 06.62v BTB M-STB ID Unknown ▼select accept o BTB ENABLE OFF

The End