Making an IMPACT on Water Treatment Industry INITIATIVE Making an IMPACT on Water Treatment Industry SOLO Manual Multiport Valves Distribution Systems Automatic Multiport Valves Remote monitoring systems Automatic Dispensing Systems

Initiative Multiport Valve Selection Its important for the best performance of the water treatment system…. 65nb 20nb 40 25nb 40nb In/out adaptor INITIATIVE

Selection of the MPV based on.. Resin Quantity (for softeners/demineralisers) 20nb MPV 25nb MPV 40nb MPV 65nb MPV Resin Quantity (Liters) Up to 80 Up to 250 Up to 1000 Up to 5000 In case of multiple units in series it’s good not to select an MPV for highest flow. Desirable maximum flows for stand alone & multiple units are as follows Based on flow.. Type of Unit 20nb MPV 25nb MPV 40nb MPV 65nbMPV Service(Up to) 2.5 5.0 12 35 Backwash Flow 3.5 7.0 15 45 INITIATIVE

Size of Vessel.. INITIATIVE

Vessel Opening Size Options: 2 ½” Threaded 4” Threaded 6” Flanged In/Out Adaptor 20NB 25 NB & 40NB 65 NB 4” x 2 ½” adaptor required for 4” vessel End Connections In/Out Adaptor 20nb MPV 25nb MPV 40nb MPV 65nb MPV ½” Hose Nipple ½” BSPF 1" BSPM Union 1 1/2" BSPM 2 ½” Union M.S.Flange INITIATIVE

Suction Line for softner MPV Suction Filter with NRV Suction Line for softner MPV 20nb MPV 25nb MPV 40nb MPV ¼” Suction filter with NRV ¼” Brine Director ½”Double Strainer ½” Brine Director ¾” Brine Director Ejector Suction 20nb MPV 25nb MPV 40nb MPV 65nb MPV Suction Flow at 2.5 Kg/cm2 Softener 100 LPH (1:2) 350 LPH (1:1) 500(top mount)/1000 (side mount) LPH (1:1) 2500 LPH INITIATIVE INITIATIVE

Selection Summary 20nb 25nb 40nb 65nb Resin (liters) Up to 80 Flow (m3/h) 2.5 5.0 12.0 35.0 Mounting Top Top/Side Side End Connection ¾” BSPM 1" BSPM Union 1 1/2” BSPM Union/Flanged 2 1/2“ BSPM Union/ M.S. Flanged Suction Line ¼” Suction filter with NRV ¼” Brine Director ½”Double Strainer ½” Brine Director ¾” Brine Director Ejector Suction Softener(LPH)@2bar 100 LPH (1:2) 350 LPH (1:1) 500/1000 2500 LPH ***Port Orientation for all MPV is left to right standard except 65nb. For filter right to left possible INITIATIVE

Riser Pipe Details.. Riser Pipe Size (mm O.D.) Length “L” In/Out Adaptor 20 or 25 9 mm below vessel top 20nb 25 25nb 32 26 mm above vessel top 25nb with 4” x 2.5” Adaptor 34 mm above vessel top 40nb 24 mm above vessel top 40nb with 4” x 2.5” Adaptor 32 mm above vessel top INITIATIVE

Selection of Distribution System Top mount MPV comes with a distribution system. In case of side mounted vessels: Types Double Strainer: for flows up to 5M3/Hr. Top- Strainer & Bottom-Hub and Lateral: for activated carbon filter. Top-Hub & Bottom-Hub & Lateral: for sand filters Top & Bottom-Hub Lateral: For flows more than 5m3/Hr Top & Bottom-Double Hub & Lateral: For flows more than 15 M3/hr and up to 40 M3/Hr INITIATIVE

Distribution Systems Side Mount Distribution System - 5M3/Hr INITIATIVE

Distribution Systems Side Mount Distribution System -12M3/Hr INITIATIVE

Distribution Systems 6” Flanged Vessel 4” Threaded Vessel Side Mount Distribution System - 25M3/Hr 6” Flanged Vessel 4” Threaded Vessel For Flows Up to 40 M3/Hr For Flows Up to 25 M3/Hr INITIATIVE

Distribution Systems Side Mount Distribution System - 40M3/Hr In/Out Adaptor(IO1) Single Strainer with 25 OD riser pipe(SS2) Riser Tube 25 OD (Not in Scope) Single Strainer with 25 OD riser pipe (SS3) Side Mount Distribution System - 40M3/Hr In/Out Adaptor for 2 1/2" Top opening For 6inched flanged vessels. INITIATIVE

Accessories Pressure Gauge Adaptor In/Out Adaptor Air release Valve 3” x 3” Male-Female Adaptor for 40mm thread length vessels 65nb Ejector S-Shaped Adaptor 20nb&25nb 4” Male x2.5’ Female Adaptor INITIATIVE

that makes all the difference…. Initiative that makes all the difference…. Thanks… INITIATIVE