Chapter 1 Introduction to Statistics 1-1Review and Preview 1-2Statistical and Critical Thinking 1-3Types of Data 1-4Collecting Sample Data

Preview Polls, studies, surveys and other data collecting tools collect data from a small part of a larger group so that we can learn something about the larger group. This is a common and important goal of statistics: Learn about a large group by examining data from some of its members.

Preview In this context, the terms sample and population have special meaning. Formal definitions for these and other basic terms will be given here. In this chapter, we will look at some of the ways to describe data.

 Data - Collections of observations, such as measurements, genders, or survey responses Data

 Statistics - The science of planning studies and experiments, obtaining data, and then organizing, summarizing, presenting, analyzing, interpreting, and drawing conclusions based on the data Statistics

Population  Population - The complete collection of all measurements or data that are being considered

Census versus Sample  Census - Collection of data from every member of a population  Sample - Subcollection of members selected from a population

Example  The Gallup corporation collected data from 1013 adults in the United States. Results showed that 66% of the respondents worried about identity theft.  The population consists of all 241,472,385 adults in the United States.  The sample consists of the 1013 polled adults.  The objective is to use the sample data as a basis for drawing a conclusion about the whole population.

1-2 Statistical and Critical Thinking This section provides an overview of the process involved in conducting a statistical study: Prepare Analyze Conclude

Prepare - Context  What do the data mean?  What is the goal of the study?

Prepare - Source of the Data  Is the source objective?  Is the source biased?  Be vigilant and skeptical of studies from sources that may be biased.

Prepare - Sampling Method  Does the method chosen greatly influence the validity of the conclusion?  Voluntary response (or self-selected) samples often have bias (those with special interest are more likely to participate).  Other methods are more likely to produce good results.

Analyze – Graph and Explore  Every analysis should begin with appropriate graphs (Chapter 2).

Analyze – Apply Statistical Methods  Later chapters describe important statistical methods.  With technology, good analysis does not require strong computational skills, but it does require using common sense and paying attention to sound statistical methods.

Conclude – Statistical Significance  Statistical significance is achieved in a study when we get a result that is very unlikely to occur by chance.

Conclude - Practical Significance  State practical implications of the results.  Common sense might suggest that the finding does not make enough of a difference to justify its use or to be practical.

Example  In a test of the Atkins weight loss program, 40 subjects had a mean weight loss of 4.6 pounds after one year.  Using formal methods of statistical analysis, we can conclude the diet appears to be effective.

Example - continued  However, although 4.6 pounds is statistically significant, using common sense, it does not seem very worthwhile.

Potential Pitfalls – Misleading Conclusions  Concluding that one variable causes the other variable when in fact the variables are only correlated or associated together. Two variables that may seemed linked, are smoking and pulse rate. We cannot conclude the one causes the other. Correlation does not imply causality.

Potential Pitfalls - Small Samples Conclusions should not be based on samples that are far too small. Example: Basing a school suspension rate on a sample of only three students

Potential Pitfalls - Loaded Questions If survey questions are not worded carefully, the results of a study can be misleading. 97% yes: “Should the President have the line item veto to eliminate waste?” 57% yes: “Should the President have the line item veto, or not?”

Potential Pitfalls - Order of Questions Questions are unintentionally loaded by such factors as the order of the items being considered. Would you say traffic contributes more or less to air pollution than industry? Results: traffic - 45%; industry - 27% When order reversed. Results: industry - 57%; traffic - 24%

Potential Pitfalls - Percentages Misleading or unclear percentages are sometimes used. Example – Continental Airlines ran an ad claiming “We’ve already improved 100% in the last six months” with respect to lost baggage. Does this mean Continental made no mistakes?

Potential Pitfalls - Nonresponse Occurs when someone either refuses to respond to a survey question or is unavailable. People who refuse to talk to pollsters have a view of the world around them that is markedly different than those who will let pollsters into their homes.

Potential Pitfalls - Missing Data Can dramatically affect results. Subjects may drop out for reasons unrelated to the study. Example - People with low incomes are less likely to report their incomes. Example – U.S. Census suffers from missing people (tend to be homeless or low income).

Potential Pitfalls - Precise Numbers Because as a figure is precise, many people incorrectly assume that it is also accurate. A precise number can be an estimate, and it should be referred to that way.

1-3 Types of Data The subject of statistics is largely about using sample data to make inferences about an entire population. It is essential to know and understand the definitions that follow.

 Parameter a numerical measurement describing some characteristic of a population. population parameter Parameter

Statistic  Statistic a numerical measurement describing some characteristic of a sample. sample statistic

Quantitative Data  Quantitative (or numerical) data consists of numbers representing counts or measurements. Example: The weights of supermodels Example: The ages of respondents

Categorical Data  Categorical (or qualitative or attribute) data consists of names or labels (representing categories). Example: The gender (male/female) of professional athletes Example: Shirt numbers on professional athletes uniforms - substitutes for names.

Working with Quantitative Data Quantitative data can be further described by distinguishing between discrete and continuous types.

 Discrete data result when the number of possible values is either a finite number or a ‘countable’ number (i.e. the number of possible values is 0, 1, 2, 3,...). Example: The number of eggs that a hen lays Discrete Data

 Continuous (numerical) data result from infinitely many possible values that correspond to some continuous scale that covers a range of values without gaps, interruptions, or jumps. Continuous Data Example: The amount of milk that a cow produces; e.g gallons per day

Levels of Measurement Another way to classify data is to use levels of measurement.

 Nominal level of measurement characterized by data that consist of names, labels, or categories only, and the data cannot be arranged in an ordering scheme (such as low to high). Example: Survey responses yes, no, undecided Nominal Level

 Ordinal level of measurement involves data that can be arranged in some order, but differences between data values either cannot be determined or are meaningless. Example: Course grades A, B, C, D, or F Ordinal Level

 Interval level of measurement involves data that can be arranged in order and the difference between any two data values is meaningful. However, there is no natural zero starting point (where none of the quantity is present). Example: Years 1000, 2000, 1776, and 1492 Interval Level

 Ratio level of measurement the interval level with the additional property that there is also a natural zero starting point (where zero indicates that none of the quantity is present); for values at this level, differences and ratios are meaningful. Example: Prices of college textbooks ($0 represents no cost, a $100 book costs twice as much as a $50 book) Ratio Level

Summary - Levels of Measurement  Nominal - categories only  Ordinal - categories with some order  Interval - differences but no natural zero point  Ratio - differences and a natural zero point

1-4 Collecting Sample Data  If sample data are not collected in an appropriate way, the data may be so completely useless that no amount of statistical torturing can salvage them.  The method used to collect sample data influences the quality of the statistical analysis.  Of particular importance is the simple random sample.

Statistical methods are driven by the data that we collect. We typically obtain data from two distinct sources: observational studies and experiment. Basics of Collecting Data

 Observational study observing and measuring specific characteristics without attempting to modify the subjects being studied. Observational Study

 Experiment apply some treatment and then observe its effects on the subjects (subjects in experiments are called experimental units) Experiment

 The Pew Research Center surveyed 2252 adults and found that 59% of them go online wirelessly.  This an observational study because the adults had no treatment applied to them. Example

 In the largest public health experiment ever conducted, 200,745 children were given the Salk vaccine, while another 201,229 children were given a placebo.  The vaccine injections constitute a treatment that modified the subjects, so this is an example of an experiment. Example

Simple Random Sample  Simple Random Sample A sample of n subjects is selected in such a way that every possible sample of the same size n has the same chance of being chosen.

 Random Sample Members from the population are selected in such a way that each individual member in the population has an equal chance of being selected. Random Sample

Systematic Sampling Select some starting point and then select every kth element in the population.

Convenience Sampling Use results that are easy to get.

Stratified Sampling Subdivide the population into at least two different subgroups that share the same characteristics, then draw a sample from each subgroup (or stratum).

Cluster Sampling Divide the population area into sections (or clusters). Then randomly select some of those clusters. Now choose all members from selected clusters.

Multistage Sampling Collect data by using some combination of the basic sampling methods. In a multistage sample design, pollsters select a sample in different stages, and each stage might use different methods of sampling.

 Random  Systematic  Convenience  Stratified  Cluster  Multistage Methods of Sampling - Summary

Different types of observational studies and experiment design. Beyond the Basics of Collecting Data

 Cross-sectional study Data are observed, measured, and collected at one point in time.  Retrospective (or case control) study Data are collected from the past by going back in time (examine records, interviews, and so on …).  Prospective (or longitudinal or cohort) study Data are collected in the future from groups sharing common factors (called cohorts). Types of Studies

 Randomization is used when subjects are assigned to different groups through a process of random selection. The logic is to use chance as a way to create two groups that are similar. Design of Experiments

 Replication is the repetition of an experiment on more than one subject. Samples should be large enough so that the erratic behavior that is characteristic of very small samples will not disguise the true effects of different treatments. It is used effectively when there are enough subjects to recognize the differences from different treatments. Design of Experiments

 Replication Design of Experiments Use a sample size that is large enough to let us see the true nature of any effects, and obtain the sample using an appropriate method, such as one based on randomness.

 Blinding is a technique in which the subject doesn’t know whether he or she is receiving a treatment or a placebo. Blinding allows us to determine whether the treatment effect is significantly different from a placebo effect, which occurs when an untreated subject reports improvement in symptoms. Design of Experiments

 Double-Blind Blinding occurs at two levels: (1)The subject doesn’t know whether he or she is receiving the treatment or a placebo. (2)The experimenter does not know whether he or she is administering the treatment or placebo. Design of Experiments

 Confounding occurs in an experiment when the experimenter is not able to distinguish between the effects of different factors. Try to plan the experiment so that confounding does not occur. Design of Experiments

Three very important considerations in the design of experiments are the following: Summary 1.Use randomization to assign subjects to different groups. 2.Use replication by repeating the experiment on enough subjects so that effects of treatment or other factors can be clearly seen. 3.Control the effects of variables by using such techniques as blinding and a completely randomized experimental design.

 Sampling error the difference between a sample result and the true population result, such an error results from chance sample fluctuations.  Nonsampling error sample data incorrectly collected, recorded, or analyzed (such as by selecting a biased sample, using a defective instrument, or copying the data incorrectly). Errors No matter how well you plan and execute the sample collection process, there is likely to be some error in the results.

 Nonrandom sampling error result of using a sampling method that is not random, such as using a convenience sample or a voluntary response sample. Errors No matter how well you plan and execute the sample collection process, there is likely to be some error in the results.