doc.: IEEE /1536r0 Submission November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 1 TGax November 2014 Closing Report Date: Authors:
doc.: IEEE /1536r0 Submission November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 2 Abstract This document is the closing report for the TGax for the November 2014 session.
doc.: IEEE /1536r0 Submission TG Structure The TG approved a motion to create four ad hoc groups. –MAC –PHY –Multiuser –Spatial Reuse The TG approved a motion to have 3 co-chairs for each of the ad hocs. Ad hoc chairs election is scheduled for January 2015 meeting on Tuesday. Ad hoc meetings will start on March 2015 Robert Stacey was appointed as the TG technical Editor November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 3
doc.: IEEE /1536r0 Submission Work Completed – TG Documents Approved the first revision of the TG Specification Framework document (11-14/1453). Approved new revisions of TG documents. – methodology.docxhttps://mentor.ieee.org/802.11/dcn/14/ ax-evaluation- methodology.docx – scenarios.docxhttps://mentor.ieee.org/802.11/dcn/14/ ax-simulation- scenarios.docx Other TG documents – model-document.docxhttps://mentor.ieee.org/802.11/dcn/14/ ax-tgax-channel- model-document.docx – ax-functional-requirements.dochttps://mentor.ieee.org/802.11/dcn/14/ ax-proposed ax-functional-requirements.doc November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 4
doc.: IEEE /1536r0 Submission Work Completed – Technical Presentations About 35 technical submissions covered during the week. A list of the submissions is available in the agenda document available at: – november-2014-meeting-agenda.ppthttps://mentor.ieee.org/802.11/dcn/14/ ax-tgax- november-2014-meeting-agenda.ppt November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 5
doc.: IEEE /1536r0 Submission November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 6 January 2015 Goals Continue to advance the TG documents based submissions. Technical Presentation
doc.: IEEE /1536r0 Submission November 2014 Osama Aboul-Magd (Huawei Technologies)Slide 7 Conference Call Times Thursday December 4 10:00 – 12:00 ET