Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey1 Question of the Day What is the Name of the Bridge in this Clip? ANSWER: The Tacoma Narrows Bridge

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey2 Question of the Day (Part 2) What was the Cause of the Failure? ANSWER: A lack of damping in the design

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey3 Topics For Today Scales and Scaling Alternate Views CK5 Problem #2 – Title Block Quiz – Multi-view and pictorial drawings

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey4 Scaling a Drawing Scaling a drawing is a process for making an object fit the dimensions of the display media Scales are tools convenient to use when creating a drawing with a standard scale (conversion factor)

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey5 Types of Scales Architect’s A measurement = 1’ 0” typically, divisions are feet and inches Civil Engineer’s 1” = 10’s of feet, divisions are 0.1’ Mechanical Engineer’s Some unit – 1”

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey6 Architect’s Civil Engineer’s Mechanical Engineer’s Scales Scales Scales Full size1”= 0’1”1” = 10.0’2”= 1” Quarter size3”=1’-0”1” = 20.0’1 ½”= 1” One-eighth1½”=1’-0”1” = 30.0’1”= 1” One-twelfth1”=1’-0”1” = 40.0’3/4”= 1” 1/2”=1’-0”1” = 50.0’1/2”= 1” 3/8”=1’-0”1” = 60.0’1/4”= 1” 1/4”=1’-0”1” = 80.0’1/8”= 1” 3/16”=1’-0”1” = 100.0’ 1/8”=1’-0” 3/32”=1’-0” Three Common Types of Scales

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey7 Architect’s Scale – Major Unit = 1 foot Divisions = inches Civil Eng. Scale – Major Unit 1 inch = 10’s of feet Divisions = tenths Mech. Eng. Scale – Major Unit = 1 inch Divisions = fraction of an inch

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey8 Example Uses

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey9 Types of Scales by Construction

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey10 Open-divided Full-divided Type of Scale by Presentation

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey11 Your Scale

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey12 Conventional and Alternative View Arrangements Review of “Conventional” Arrangement Demonstration of “Alternative” Arrangement for Right Side View

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey13 Convention on Labeling of Views

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey14 Conventional Arrangement of Views

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey15 Unfolding of Coordinate Planes - Conventional

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey16 R 1 R 2 Alternate Arrangement of Views for the Right Side

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey17 Alternative Arrangement Views

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey18 Border Line Title Block Today’s CADKEY Project (CK5 #2)

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey19 Establish a File Name Format – i.e. EG H191 Proj #1 and/or EG H191 Dwg #7 Title Block Information

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey20 Parts and Patterns The borderline and title block are saved as a pattern file so that they may be added to a part file. A part file can be composed of one part and multiple patterns. The reverse is not true. Once you have done your title block you can use it again and again by simply changing the title, date, Dwg # and File Name.

Fundamentals of Engineering – Honors – ENGR H191 Lecture 5 - Cadkey21 Today’s Assignment Dwg 9 – CK5 #2 Title Block and Patterns with CAEG Due at end of class today Dwg 10 – ML-1 Missing Line Problems with pictorials  Use Multi-view Sketch Paper and/or Isometric Sketch Paper Due at beginning of the next lecture