ConneXium Network Manager A Network Management Software Solution that is optimized for Industrial Networks

ConneXium Network Manager What is it? A Network Management Software Solution that is optimized for Industrial Networks Who is it designed for? Automation and Controls personnel who are familiar with Industrial Ethernet, PLC’s, HMI and SCADA equipment and concepts How to use it? To configure infrastructure devices such as managed switches To monitor network performance To alert personnel of real or possible problems To baseline and document network performance

ConneXium Network Manager Problem Potential Problem Past Problem

ConneXium Network Manager Why do I need it? For the same reason you need SCADA or HMI – to provide a window into Ethernet network operation and improve plant productivity. Devices are displayed with port connections or names Devices are portrayed with appropriate icons if available Inactive portion of rings are shown as dashed Display can be customized, background diagram can be added to correspond to physical location

Device Support Wireless devices Unmanaged devices Third party Shows link status Logs changes in access point location for roaming Unmanaged devices Using Ping, finds devices within configured scan range. Third party Supports third party devices via Ping and SNMP Both infrastructure and end devices supported Any SNMP enabled device can be configured and managed using CNM

Let’s Play Start the ConneXium Network Manager software

Set Scan Range Create a New Project Set the scan range

Active Scan Ranges Multiple ranges can be set The Active , the software will scan the devices in the active range

Device Discovery Displays devices found on the network SNMP PING Identity Object ConneXium Network Manager matches the devices to existing profile

Auto Topology Once all devices have been identified next step would be to see the logical layout of the network.

Auto Topology Options

Auto Topology Layout

Network Layout Core Network Control Cabinet Control Room Conveyor 6 5 Core Network Control Room Control Cabinet

Folder Options

Network Disruptions

Link Down

Link Down Information

Link Recovery Status Update

Redundancy at Work

Redundancy link down Alternate link Broken link

Network Recovered Status notification color will remain green till event has been acknowledged

CNM OPC Tags OPC tags allow you to see that same information on SCADA page!

ConneXConfig Make configuration of multiple switches a breeze!

Changing Parameters

Saving Multiple Configurations

Seeing the Results

Customize Display - Icons Changing icons and background to customize the display

Customize Display - Background Changing background image with your logo or building blueprint

Play Now you do it!