“THE LEADER IN THE BUSINESS OF QUALITY” A FULL SERVICE ISO IEC 17025:2005 (A2LA) Accredited METROLOGY LAB Quality Calibration Service, Inc. ESTABLISHED : : New State Of The Art Metrology Facility 1

 Established : June 1984 : Hard Gage Calibration (10 x 10 Lab)  1986: Purchased 1st 4000 Sq. Ft Building/ Dimensional Insp.  November 1993: New 8500 Sq. Ft Building  December 1993: 1st Lab To Achieve Dual Accreditation A2LA & ISO 9002  1996: Electro-Mechanical Gage & Equipment Cal & Repair  1998: Building Expansion 1500 Sq. feet  August 2000: QCS Acquires Accurate Gage Co. & Adds 5000 SQ. Ft Dedicated Repair Center and 10 Employees  January 2014 Purchased and Moved to 20,000 Sq. Ft. State of the Art Facility in New Berlin, WI COMPANY HISTORY 2

With Technical capabilities second to none, QCS features dedicated state of the art labs for metrology services including: hard gage calibration, mechanical gage calibration and repair, electronic test and measurement equipment calibration and repair, and CMM first article dimensional inspection services. Our environmentally controlled labs are continually monitored for fluctuations of humidity, temperature and dust to insure constant accuracy of our equipment, resulting in precise measurements of your gages. By utilizing the most sophisticated equipment available, you are assured minimal total measurement uncertainty. LABORATORY ENVIRONMENT 3

Full Service State Of The Art Metrology Laboratories One Stop Shopping For All Metrology Needs 4

QCS is a full service Metrology Lab specializing in all phases of hard gage calibration. Our Hard Gage Lab is environmentally controlled at 68 Degrees F +/- 1 Degree F, with a maximum relative humidity of 45%. HARD GAGE LAB “THE LEADER IN THE BUSINESS OF QUALITY” 5

 Gage Blocks  Cylindrical Plug & Ring Gages  Threaded Plug & Ring Gages  Pin Gages  NPT-NPTF & ANPT Thread Gages   Micrometer Length Standards   Micrometer Masters / Kalmasters   Spline Gages   Thread Measuring Wires  Optical Flats  Snap Gages  Master Discs  Precision Balls  Parallels  And Other Misc. Hard Gages HARD GAGE CAPABILITIES 6

QCS specializes in CMM First Article dimensional inspection of manufactured, cast, rubber, or plastic molded parts on our certified (ANSI /ASME B89 Standard ) coordinate Measuring Machines.  Automotive approved - Same day quotations  24 hour turn around (same day, if prescheduled) CMM DIMENSIONAL INSPECTION 7

 NIST traceability, compliance to all Military and Federal Standards and Specifications   Inspection per ANSI Y14.5M DCC Drive utilizing ANSI standard   DMIS software   Zeiss Robotic Arm and Renishaw Indexable Probe Systems   Scanning / Scan to IGES   Reverse Engineering / Digitizing   Non-contact 3-axis video inspection   Complete capability studies, ISIR's, AND PPAP’S  Complete surface analysis capabilities  Complete turnkey inspection projects DIMENSIONAL INSPECTION LAB CAPABILITIES 8

QCS offers complete repair and calibration of mechanical and electronic gaging and hand tools. MECHANICAL GAGE CALIBRATION & REPAIR 9

  Micrometers  Dial and Vernier Calipers  Torque and Force Gages  Dial and Test Indicators  Height Gages and Height Masters  Pressure and Vacuum Gages  Dial and Digital Load Cells  Torque Testers, Watches, Screwdrivers, and Wrenches  Cable Tensiometers  And Other Misc. Hand Tools and Mechanical Gages MECHANICAL GAGE CALIBRATION & REPAIR LAB 10

MECHANICAL GAGE CALIBRATION & REPAIR LAB Cost Analysis Provided For All Repairs On Formal Quotations 11

Electronics Lab QCS offers a full range of calibration and repair services for electronic test and measurement equipment and the capability to repair a wide variety of electronic instruments and meters to component level. ELECTRONIC TEST EQUIPMENT LAB 12

 Oscilloscopes  Multimeters  Frequency Counters  Capacitance Meters  Function Generators  Frequency Counters  Hypot Testers  Signal Generators  Sound Level Meters  Tachometers  Full Range of Other Misc. Electronic Test Equipment ELECTRONICS LAB CAPABILITIES 13

Our fleet of Service Vans enables QCS to provide our customers with a full range of on-site calibration services. FIELD SERVICE 14

Coordinate Measuring Machines  Coordinate Measuring Machines  Optical Comparators  Hardness, Spring, and Tensile Testers  Microscopes  Electronic Test and Measurement Equipment  Scales  Super Mics  Granite Surface Plate Calibration & Resurfacing  Hand Tools (Torque, Mics, Calipers, Indicators, Pressure, etc.)  Surface Finish Analyzers  And More FIELD SERVICE CAPABILITIES 15

Distributor For Most Major Gage and Hand Tool Manufacturers OEM NEW GAGE /REPLACEMENT SALES Vermont Gage 16

We Sell New Replacement Gage Block Sets at One Third the Cost of Major Brands. All Gage Block Sets Include an A2LA Accredited Long Form Certification. QCS GAGE COMPANY 17

New Replacement Digital (w/SPC output) Dial Calipers and Indicators Digital (w/ SPC Output) and Vernier Micrometers All New Gages include long form certifications traceable to N.I.S.T. at no extra cost. ! Available at half the cost of most major brands! QCS GAGE COMPANY 18

 QCS Employs It’s Own IT Staff  QCS utilizes internally developed and maintained Software for all operational applications providing greater flexibility to better serve our customers  The QCS System encapsulates what other “canned” software cannot by being a “Live” system  Future enhancements and customer requirements easily incorporated  Electronic Quotations, PO’s, Invoices  QCS hosts our own web site. This allows us complete control and security over our Online Gage Management System (OGMS). Information Technology 19

20  Assign your own users and their rights  View your certifications within 24 Hrs of invoicing  Track your gages at any workstation with an internet connection  Download your measurement data  Gage Management without the worries of: license fees, setup, maintenance, backup, upgrades, administration costs, customization costs, disaster recovery, etc.  More effective than a “bar code” system and without the cumbersome bar codes  Future enhancements and customer requirements are easy to add Information Technology Developments QCS Online Gage Management System (OGMS) 20

SECURE LOG - IN Information Technology Developments (OGMS) 21

HOME PAGE Information Technology Developments (OGMS) 22

MESSAGE PAGE Information Technology Developments (OGMS) 23

SEARCH SCREEN Information Technology Developments (OGMS) 24

OVERDUE REPORT Information Technology Developments (OGMS) Information Technology Developments (OGMS) 25

GAGES FROM LAST INVOICE Information Technology Developments (OGMS) 26

ONLINE CERTIFICATES Information Technology Developments (OGMS) 27

ON-LINE CERTIFICATES Information Technology Developments (OGMS) 28

What Separates QCS From The Competition ???  Customer Service  Technical Expertise  Competitive Pricing  Full Spectrum Of Capabilities With One Of The Largest Scopes of Accreditations Of Any Lab  Long Form Certificates Included With All  No Additional Cost  On Line Gage Management System  Continual Improvements & Technology Advancements 29

QCS Thanks You For Your Time… QUALITY CALIBRATION SERVICE, INC. 30